Re: [PATCH v6 5/6] ata: libata-scsi: probe additional LUNs for multi-LUN ATAPI devices

[Hannes Reinecke <hare@suse.de>]

On 6/8/26 23:34, Phil Pemberton wrote:
> After LUN 0 is added for an ATAPI device, check its BLIST_FORCELUN
> flag.  If set, bump dev->nr_luns to the host's max_lun so the LUN
> routing in atapi_xlat() accepts the probe INQUIRYs, then call
> scsi_scan_target() with SCAN_WILD_CARD to trigger the SCSI layer's
> built-in sequential LUN scan for that target only.  This probes
> LUNs 1..shost->max_lun, driven by the libata atapi_max_lun module
> parameter.
> 
> Devices without BLIST_FORCELUN (the vast majority of ATAPI devices)
> are left with only LUN 0 -- no sequential scan is triggered, so
> single-LUN devices like the iHAS124 DVD writer are completely
> unaffected.
> 
> Non-responding LUNs (PQ=0/PDT=0x1f) are silently skipped by
> scsi_probe_and_add_lun() when BLIST_NO_LUN_1F is set on the device
> via scsi_devinfo.
> 
> Signed-off-by: Phil Pemberton <philpem@philpem.me.uk>
> ---
>   drivers/ata/libata-scsi.c | 27 +++++++++++++++++++++++----
>   1 file changed, 23 insertions(+), 4 deletions(-)
> 
Reviewed-by: Hannes Reinecke <hare@kernel.org>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                  Kernel Storage Architect
hare@suse.de                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich