From: Rajendra Nayak <rnayak@codeaurora.org>
To: Douglas Anderson <dianders@chromium.org>,
Mark Brown <broonie@kernel.org>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: mkshah@codeaurora.org, georgi.djakov@linaro.org,
Akash Asthana <akashast@codeaurora.org>,
swboyd@chromium.org, linux-arm-msm@vger.kernel.org,
mka@chromium.org, ctheegal@codeaurora.org,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org
Subject: Re: [PATCH v2] spi: spi-geni-qcom: Set the clock properly at runtime resume
Date: Fri, 10 Jul 2020 09:47:19 +0530 [thread overview]
Message-ID: <378698e8-bd1e-5cea-7ca3-0560759e561a@codeaurora.org> (raw)
In-Reply-To: <20200709074037.v2.1.I0b701fc23eca911a5bde4ae4fa7f97543d7f960e@changeid>
On 7/9/2020 8:10 PM, Douglas Anderson wrote:
> In the patch ("spi: spi-geni-qcom: Avoid clock setting if not needed")
> we avoid a whole pile of clock code. As part of that, we should have
> restored the clock at runtime resume. Do that.
>
> It turns out that, at least with today's configurations, this doesn't
> actually matter. That's because none of the current device trees have
> an OPP table for geni SPI yet. That makes dev_pm_opp_set_rate(dev, 0)
> a no-op. This is why it wasn't noticed in the testing of the original
> patch. It's still a good idea to fix, though.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
> Sending this as a separate patch even though I think the patch it's
> fixing [1] hasn't landed yet. I'd be happy if this was squashed into
> that patch when landing if that suits everyone, but it could land on
> its own too.
>
> Like the patch it's fixing, this needs to target the Qualcomm tree in
> order to avoid merge conflicts.
>
> [1] https://lore.kernel.org/r/20200701174506.1.Icfdcee14649fc0a6c38e87477b28523d4e60bab3@changeid
>
> Changes in v2:
> - Return error from runtime resume if dev_pm_opp_set_rate() fails.
>
> drivers/spi/spi-geni-qcom.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
> index 97fac5ea6afd..0e11a90490ff 100644
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -79,6 +79,7 @@ struct spi_geni_master {
> u32 tx_wm;
> u32 last_mode;
> unsigned long cur_speed_hz;
> + unsigned long cur_sclk_hz;
> unsigned int cur_bits_per_word;
> unsigned int tx_rem_bytes;
> unsigned int rx_rem_bytes;
> @@ -116,6 +117,9 @@ static int get_spi_clk_cfg(unsigned int speed_hz,
> ret = dev_pm_opp_set_rate(mas->dev, sclk_freq);
> if (ret)
> dev_err(mas->dev, "dev_pm_opp_set_rate failed %d\n", ret);
> + else
> + mas->cur_sclk_hz = sclk_freq;
> +
> return ret;
> }
>
> @@ -670,7 +674,11 @@ static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
> if (ret)
> return ret;
>
> - return geni_se_resources_on(&mas->se);
> + ret = geni_se_resources_on(&mas->se);
> + if (ret)
> + return ret;
> +
> + return dev_pm_opp_set_rate(mas->dev, mas->cur_sclk_hz);
> }
>
> static int __maybe_unused spi_geni_suspend(struct device *dev)
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2020-07-10 4:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-09 14:40 Douglas Anderson
2020-07-10 4:17 ` Rajendra Nayak [this message]
2020-07-10 4:41 ` Akash Asthana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=378698e8-bd1e-5cea-7ca3-0560759e561a@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=agross@kernel.org \
--cc=akashast@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=ctheegal@codeaurora.org \
--cc=dianders@chromium.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mka@chromium.org \
--cc=mkshah@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome