Re: [PATCH v3 5/5] arm64: dts: ti: k3-am68-phyboard-izar: Add PEB-AV-15 overlay

[Vignesh Raghavendra <vigneshr@ti.com>]

On 12/03/26 05:18, Dominik Haller wrote:
> Add an overlay to use the PEB-AV-15 AV-Adapter. It's a small expansion board
> using a Lontium LT8912B DSI->HDMI bridge and a TLV320AIC3007 audio codec.
> 
> Signed-off-by: Dominik Haller <d.haller@phytec.de>
> ---
>  arch/arm64/boot/dts/ti/Makefile               |   4 +
>  .../ti/k3-am68-phyboard-izar-peb-av-15.dtso   | 192 ++++++++++++++++++
>  2 files changed, 196 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index a188e62e32b4..ae5994818ad2 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -135,6 +135,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar-lvds-ph128800t006.dtb
>  k3-am68-phyboard-izar-lvds-ph128800t006-dtbs := k3-am68-phyboard-izar.dtb \
>  	k3-am68-phyboard-izar-lvds-ph128800t006.dtbo
> +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar-peb-av-15.dtb
> +k3-am68-phyboard-izar-peb-av-15-dtbs := k3-am68-phyboard-izar.dtb \
> +        k3-am68-phyboard-izar-peb-av-15.dtbo
>  dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo
>  dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
> @@ -323,6 +326,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
>  	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
>  	k3-am67a-kontron-sa67-base-gpios.dtb \
>  	k3-am68-phyboard-izar-lvds-ph128800t006.dtb \
> +	k3-am68-phyboard-izar-peb-av-15.dtb \
>  	k3-am68-sk-base-board-csi2-dual-imx219.dtb \
>  	k3-am68-sk-base-board-pcie1-ep.dtb \
>  	k3-am69-sk-csi2-dual-imx219.dtb \
> diff --git a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso
> new file mode 100644
> index 000000000000..a86971fcdee1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar-peb-av-15.dtso
> @@ -0,0 +1,192 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * Copyright (C) 2026 PHYTEC Messtechnik GmbH
> + * Author: Dominik Haller <d.haller@phytec.de>
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> +	audio_refclk1: audio-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <19200000>;
> +	};
> +
> +	hdmi: hdmi-connector {
> +		compatible = "hdmi-connector";
> +		label = "hdmi";
> +		type = "a";
> +		ddc-i2c-bus = <&main_i2c2>;
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&lt8912b_out>;
> +			};
> +		};
> +	};
> +
> +	reg_audio_3v3: regulator-audio-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC3V3_AUDIO";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_audio_1v8: regulator-audio-1v8 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC1V8_AUDIO";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "PEB-AV-15";
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack",
> +			"Microphone", "Mic Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "HPLOUT",
> +			"Headphone Jack", "HPROUT",
> +			"MIC3R", "Mic Jack",
> +			"Mic Jack", "Mic Bias";
> +		simple-audio-card,format = "dsp_b";
> +		simple-audio-card,bitclock-inversion;
> +		simple-audio-card,bitclock-master = <&link0_codec>;
> +		simple-audio-card,frame-master = <&link0_codec>;
> +
> +		link0_cpu: simple-audio-card,cpu {
> +			sound-dai = <&mcasp0>;
> +		};
> +
> +		link0_codec: simple-audio-card,codec {
> +			sound-dai = <&audio_codec>;
> +			clocks = <&audio_refclk1>;
> +		};
> +	};
> +
> +};
> +
> +&dphy_tx1 {
> +        status = "okay";

You have spacs instead of tabs

> +};
> +
> +&dsi1 {
> +	status = "okay";
> +};
> +
> +&dsi1_ports {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	port@0 {
> +		reg = <0>;
> +		dsi1_out: endpoint {
> +			remote-endpoint = <&lt8912b_in>;
> +		};
> +	};
> +
> +	port@1 {
> +		reg = <1>;
> +		dsi1_in: endpoint {
> +			remote-endpoint = <&dpi3_out>;
> +		};
> +	};
> +};
> +
> +&dss {
> +	status = "okay";
> +};
> +
> +&dss_ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +

Here too... Please check the entire series.

> +        port@3 {
> +                reg = <3>;
> +                dpi3_out: endpoint {
> +                        remote-endpoint = <&dsi1_in>;
> +                };
> +        };
> +};
> +
> +&mcasp0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mcasp0_pins>;
> +
> +	#sound-dai-cells = <0>;
> +
> +	op-mode = <0>;	/* MCASP_IIS_MODE */
> +	tdm-slots = <2>;
> +
> +	/* 4 serializers */
> +	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
> +		2 0 0 1
> +		0 0 0 0
> +		0 0 0 0
> +		0 0 0 0
> +	>;
> +
> +	tx-num-evt = <32>;
> +	rx-num-evt = <32>;
> +	status = "okay";
> +};
> +
> +&main_i2c2 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	audio_codec: audio-codec@18 {
> +		compatible = "ti,tlv320aic3007";
> +		reg = <0x18>;
> +		#sound-dai-cells= <0>;

Missing space before "="

> +		ai3x-micbias-vg = <2>;
> +		AVDD-supply = <&reg_audio_3v3>;
> +		IOVDD-supply = <&reg_audio_3v3>;
> +		DRVDD-supply = <&reg_audio_3v3>;
> +		DVDD-supply = <&reg_audio_1v8>;
> +
> +	};
> +
> +	bridge@48 {
> +		compatible = "lontium,lt8912b";
> +		reg = <0x48>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				lt8912b_in: endpoint {
> +					data-lanes = <0 1 2 3>;
> +					remote-endpoint = <&dsi1_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				lt8912b_out: endpoint {
> +					remote-endpoint = <&hdmi_connector_in>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&main_pmx0 {
> +	mcasp0_pins: mcasp0-default-pins {
> +		pinctrl-single,pins = <
> +			J721S2_IOPAD(0x03c, PIN_INPUT, 1) /* (U27) WCLK, MCASP0_AFSX.MCASP0_AFSX */
> +			J721S2_IOPAD(0x038, PIN_INPUT, 1) /* (AB28) BCLK, MCASP0_ACLKX.MCASP0_ACLKX */
> +			J721S2_IOPAD(0x040, PIN_OUTPUT, 1) /* (AC28) DOUT, MCASP0_AXR0.MCASP0_AXR0 */
> +			J721S2_IOPAD(0x07c, PIN_INPUT, 1) /* (T27) DIN, MCASP0_AXR3.MCASP0_AXR3 */
> +		>;
> +	};
> +};

-- 
Regards
Vignesh
https://ti.com/opensource