Re: [RFC PATCH 5/6] arm64: dts: qcom: add base AIM500 dtsi

[Jingyi Wang <quic_jingyw@quicinc.com>]

Hi Dmitry,

On 2/20/2024 5:19 PM, Dmitry Baryshkov wrote:
> On Tue, 20 Feb 2024 at 11:17, Jingyi Wang <quic_jingyw@quicinc.com> wrote:
>>
>> Hi Dmitry,
>>
>> On 2/5/2024 10:23 PM, Dmitry Baryshkov wrote:
>>> On Mon, 5 Feb 2024 at 14:00, Jingyi Wang <quic_jingyw@quicinc.com> wrote:
>>>>
>>>> Introduce aim500 board dtsi.
>>>
>>> So, is it a board or a module?
>>>
>> aim500 is a module, will fix the descrption.
>>
>>>>
>>>> AIM500 Series is a highly optimized family of modules designed to
>>>> support AIoT and Generative AI applications based on sm8650p with
>>>> PMIC and bluetooth functions etc.
>>>>
>>>> Co-developed-by: Tingwei Zhang <quic_tingweiz@quicinc.com>
>>>> Signed-off-by: Tingwei Zhang <quic_tingweiz@quicinc.com>
>>>> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
>>>> ---
>>>>  arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi | 409 +++++++++++++++++++
>>>>  1 file changed, 409 insertions(+)
>>>>  create mode 100644 arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi b/arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi
>>>> new file mode 100644
>>>> index 000000000000..cb857da8653b
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/sm8650p-aim500.dtsi
>>>> @@ -0,0 +1,409 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>>> +#include "sm8650p.dtsi"
>>>> +#include "pm8550.dtsi"
>>>> +#include "pm8550b.dtsi"
>>>> +#define PMK8550VE_SID 8
>>>> +#include "pm8550ve.dtsi"
>>>> +#include "pm8550vs.dtsi"
>>>> +#include "pmk8550.dtsi"
>>>> +
>>>> +/ {
>>>> +       aliases {
>>>> +               serial1 = &uart14;
>>>> +       };
>>>> +
>>>> +       vph_pwr: vph-pwr-regulator { };
>>>
>>> Is this regulator a part of the module or a part of the carrier board?
>>> If the latter is true, this must go to the carrier board DT file.
>>>
>>
>> the vph_pwr regulator is defined in the aim500-aiot carrier board and used
>> in aim500 module.
> 
> If it is defined in the carrier board, then please move it and
> corresponding supply entries to the carrier board dts. Other devices
> using the SoM can have different power tree.
> 
> While we are at it, could you please rename the node to regulator-vph-pwr?
> 
> 
will rename the node and move it to sm8650p-aim500-aiot.dts

Thanks,
Jingyi