DWC2 and/or S3C-HSOTG for STA2X11 board

[Federico Vaga <federico.vaga@gmail.com>]

Hello,

I have an x86 board made by STMicroelectronics (STA2X11) with the Synopsis 
USB-OTG DesignWare 2 on it and connected through the PCI-e bus.


I know that there are two drivers for the same controller:

   (host)   drivers/staging/dwc2/*
   (device) drivers/usb/gadget/s3c-hsotg.{c|h}


So, at the moment I cannot have a board with both host/device working at the 
same time. I have to choose to use the block as device or host, right?

I know that the plan is to merge the s3c-hsotg in the dwc2 driver 
(https://lwn.net/Articles/540283/). Are still accepted patch to s3c-hsotg? Or 
it is work in progress right now (soon), so it is better to wait after the 
merge?

In order to use the s3c-hsotg I must implement a PCI wrapper that uses this 
driver. It will be accepted in the kernel even if it will be removed sooner or 
later because of the driver merge?

Thank you :)

-- 
Federico Vaga