From: "Bryan Wu" <cooloney@kernel.org>
To: "Andrew Morton" <akpm@linux-foundation.org>
Cc: jgarzik@pobox.com, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Sonic Zhang" <sonic.zhang@analog.com>
Subject: Re: [PATCH 1/1] libata: Blackfin Pata Driver: Add proper PM operation into ATAPI driver.
Date: Thu, 28 Aug 2008 16:20:49 +0800 [thread overview]
Message-ID: <386072610808280120u7fb5073an52c10bc98b8448d8@mail.gmail.com> (raw)
In-Reply-To: <20080827205118.f13d537f.akpm@linux-foundation.org>
On Thu, Aug 28, 2008 at 11:51 AM, Andrew Morton
<akpm@linux-foundation.org> wrote:
> On Wed, 27 Aug 2008 11:51:18 +0800 Bryan Wu <cooloney@kernel.org> wrote:
>
>> From: Sonic Zhang <sonic.zhang@analog.com>
>>
>> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
>> Signed-off-by: Bryan Wu <cooloney@kernel.org>
>> ---
>> drivers/ata/pata_bf54x.c | 29 ++++++++++++++++++++++++-----
>> 1 files changed, 24 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
>> index d393290..60f4872 100644
>> --- a/drivers/ata/pata_bf54x.c
>> +++ b/drivers/ata/pata_bf54x.c
>> @@ -1632,6 +1632,8 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev)
>> return -ENODEV;
>> }
>>
>> + dev_set_drvdata(&pdev->dev, host);
>> +
>> return 0;
>> }
>>
>> @@ -1648,6 +1650,7 @@ static int __devexit bfin_atapi_remove(struct platform_device *pdev)
>> struct ata_host *host = dev_get_drvdata(dev);
>>
>> ata_host_detach(host);
>> + dev_set_drvdata(&pdev->dev, NULL);
>>
>> peripheral_free_list(atapi_io_port);
>>
>> @@ -1657,11 +1660,27 @@ static int __devexit bfin_atapi_remove(struct platform_device *pdev)
>> #ifdef CONFIG_PM
>> int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state)
>> {
>> - return 0;
>> + struct ata_host *host = dev_get_drvdata(&pdev->dev);
>> + if (host)
>> + return ata_host_suspend(host, state);
>> + else
>> + return 0;
>> }
>>
>> int bfin_atapi_resume(struct platform_device *pdev)
>> {
>> + struct ata_host *host = dev_get_drvdata(&pdev->dev);
>> + int ret;
>> +
>> + if (host) {
>> + ret = bfin_reset_controller(host);
>> + if (ret) {
>> + printk(KERN_ERR DRV_NAME ": Error during HW init\n");
>> + return ret;
>> + }
>> + ata_host_resume(host);
>> + }
>> +
>> return 0;
>> }
>> #endif
>> @@ -1669,13 +1688,13 @@ int bfin_atapi_resume(struct platform_device *pdev)
>> static struct platform_driver bfin_atapi_driver = {
>> .probe = bfin_atapi_probe,
>> .remove = __devexit_p(bfin_atapi_remove),
>> +#ifdef CONFIG_PM
>> + .suspend = bfin_atapi_suspend,
>> + .resume = bfin_atapi_resume,
>> +#endif
>> .driver = {
>> .name = DRV_NAME,
>> .owner = THIS_MODULE,
>> -#ifdef CONFIG_PM
>> - .suspend = bfin_atapi_suspend,
>> - .resume = bfin_atapi_resume,
>> -#endif
>> },
>> };
>
> I think we can make these fixes while we're there?
>
> From: Andrew Morton <akpm@linux-foundation.org>
>
> - remove the ifdefs using the usual pattern
>
> - make things static
>
Right, I agree here.
-Bryan
> Cc: Bryan Wu <cooloney@kernel.org>
> Cc: Jeff Garzik <jeff@garzik.org>
> Cc: Sonic Zhang <sonic.zhang@analog.com>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
> drivers/ata/pata_bf54x.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff -puN drivers/ata/pata_bf54x.c~libata-blackfin-pata-driver-add-proper-pm-operation-into-atapi-driver-fix drivers/ata/pata_bf54x.c
> --- a/drivers/ata/pata_bf54x.c~libata-blackfin-pata-driver-add-proper-pm-operation-into-atapi-driver-fix
> +++ a/drivers/ata/pata_bf54x.c
> @@ -1658,7 +1658,7 @@ static int __devexit bfin_atapi_remove(s
> }
>
> #ifdef CONFIG_PM
> -int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state)
> +static int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state)
> {
> struct ata_host *host = dev_get_drvdata(&pdev->dev);
> if (host)
> @@ -1667,7 +1667,7 @@ int bfin_atapi_suspend(struct platform_d
> return 0;
> }
>
> -int bfin_atapi_resume(struct platform_device *pdev)
> +static int bfin_atapi_resume(struct platform_device *pdev)
> {
> struct ata_host *host = dev_get_drvdata(&pdev->dev);
> int ret;
> @@ -1683,15 +1683,16 @@ int bfin_atapi_resume(struct platform_de
>
> return 0;
> }
> +#else
> +#define bfin_atapi_suspend NULL
> +#define bfin_atapi_resume NULL
> #endif
>
> static struct platform_driver bfin_atapi_driver = {
> .probe = bfin_atapi_probe,
> .remove = __devexit_p(bfin_atapi_remove),
> -#ifdef CONFIG_PM
> .suspend = bfin_atapi_suspend,
> .resume = bfin_atapi_resume,
> -#endif
> .driver = {
> .name = DRV_NAME,
> .owner = THIS_MODULE,
> _
>
>
prev parent reply other threads:[~2008-08-28 8:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-27 3:51 Bryan Wu
2008-08-28 3:51 ` Andrew Morton
2008-08-28 8:20 ` Bryan Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=386072610808280120u7fb5073an52c10bc98b8448d8@mail.gmail.com \
--to=cooloney@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sonic.zhang@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®