From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux PM <linux-pm@vger.kernel.org>,
Quentin Perret <quentin.perret@arm.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
Chen Yu <yu.c.chen@intel.com>,
Gabriele Mazzotta <gabriele.mzt@gmail.com>,
Peter Zijlstra <peterz@infradead.org>
Subject: Re: [Update][PATCH v3 3/4] cpufreq: schedutil: Simplify iowait boosting
Date: Mon, 01 Apr 2019 11:27:25 +0200 [thread overview]
Message-ID: <388546350.6JbkPPd9ra@aspire.rjw.lan> (raw)
In-Reply-To: <3714586.Xfz7sSM4fi@aspire.rjw.lan>
On Thursday, March 28, 2019 11:33:21 AM CEST Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> There is not reason for the minimum iowait boost value in the
> schedutil cpufreq governor to depend on the available range of CPU
> frequencies. In fact, that dependency is generally confusing,
> because it causes the iowait boost to behave somewhat differently
> on CPUs with the same maximum frequency and different minimum
> frequencies, for example.
>
> For this reason, replace the min field in struct sugov_cpu
> with a constant and choose its values to be 1/8 of
> SCHED_CAPACITY_SCALE (for consistency with the intel_pstate
> driver's internal governor).
>
> [Note that policy->cpuinfo.max_freq will not be a constant any more
> after a subsequent change, so this change is depended on by it.]
>
> Link: https://lore.kernel.org/lkml/20190305083202.GU32494@hirez.programming.kicks-ass.net/T/#ee20bdc98b7d89f6110c0d00e5c3ee8c2ced93c3d
> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>
> As pointed out by Quentin, the original patch overlooked two kerneldoc
> comments that needed to be updated along with the code, so do that here.
>
> No other changes with respect to the original.
>
> ---
> kernel/sched/cpufreq_schedutil.c | 21 ++++++++++-----------
> 1 file changed, 10 insertions(+), 11 deletions(-)
>
> Index: linux-pm/kernel/sched/cpufreq_schedutil.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/cpufreq_schedutil.c
> +++ linux-pm/kernel/sched/cpufreq_schedutil.c
> @@ -13,6 +13,8 @@
> #include <linux/sched/cpufreq.h>
> #include <trace/events/power.h>
>
> +#define IOWAIT_BOOST_MIN (SCHED_CAPACITY_SCALE / 8)
> +
> struct sugov_tunables {
> struct gov_attr_set attr_set;
> unsigned int rate_limit_us;
> @@ -51,7 +53,6 @@ struct sugov_cpu {
> u64 last_update;
>
> unsigned long bw_dl;
> - unsigned long min;
> unsigned long max;
>
> /* The field below is for single-CPU policies only: */
> @@ -291,8 +292,8 @@ static unsigned long sugov_get_util(stru
> *
> * The IO wait boost of a task is disabled after a tick since the last update
> * of a CPU. If a new IO wait boost is requested after more then a tick, then
> - * we enable the boost starting from the minimum frequency, which improves
> - * energy efficiency by ignoring sporadic wakeups from IO.
> + * we enable the boost starting from IOWAIT_BOOST_MIN, which improves energy
> + * efficiency by ignoring sporadic wakeups from IO.
> */
> static bool sugov_iowait_reset(struct sugov_cpu *sg_cpu, u64 time,
> bool set_iowait_boost)
> @@ -303,7 +304,7 @@ static bool sugov_iowait_reset(struct su
> if (delta_ns <= TICK_NSEC)
> return false;
>
> - sg_cpu->iowait_boost = set_iowait_boost ? sg_cpu->min : 0;
> + sg_cpu->iowait_boost = set_iowait_boost ? IOWAIT_BOOST_MIN : 0;
> sg_cpu->iowait_boost_pending = set_iowait_boost;
>
> return true;
> @@ -317,8 +318,9 @@ static bool sugov_iowait_reset(struct su
> *
> * Each time a task wakes up after an IO operation, the CPU utilization can be
> * boosted to a certain utilization which doubles at each "frequent and
> - * successive" wakeup from IO, ranging from the utilization of the minimum
> - * OPP to the utilization of the maximum OPP.
> + * successive" wakeup from IO, ranging from IOWAIT_BOOST_MIN to the utilization
> + * of the maximum OPP.
> + *
> * To keep doubling, an IO boost has to be requested at least once per tick,
> * otherwise we restart from the utilization of the minimum OPP.
> */
> @@ -349,7 +351,7 @@ static void sugov_iowait_boost(struct su
> }
>
> /* First wakeup after IO: start with minimum boost */
> - sg_cpu->iowait_boost = sg_cpu->min;
> + sg_cpu->iowait_boost = IOWAIT_BOOST_MIN;
> }
>
> /**
> @@ -389,7 +391,7 @@ static unsigned long sugov_iowait_apply(
> * No boost pending; reduce the boost value.
> */
> sg_cpu->iowait_boost >>= 1;
> - if (sg_cpu->iowait_boost < sg_cpu->min) {
> + if (sg_cpu->iowait_boost < IOWAIT_BOOST_MIN) {
> sg_cpu->iowait_boost = 0;
> return util;
> }
> @@ -826,9 +828,6 @@ static int sugov_start(struct cpufreq_po
> memset(sg_cpu, 0, sizeof(*sg_cpu));
> sg_cpu->cpu = cpu;
> sg_cpu->sg_policy = sg_policy;
> - sg_cpu->min =
> - (SCHED_CAPACITY_SCALE * policy->cpuinfo.min_freq) /
> - policy->cpuinfo.max_freq;
> }
>
> for_each_cpu(cpu, policy->cpus) {
>
>
Any more comments on this patch?
If not, I'll queue it up along with the rest of the series.
Thanks!
next prev parent reply other threads:[~2019-04-01 9:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-26 11:12 [PATCH v3 0/4] cpufreq: intel_pstate: Handle _PPC updates on global turbo disable/enable Rafael J. Wysocki
2019-03-26 11:15 ` [PATCH v3 1/4] cpufreq: intel_pstate: Driver-specific handling of _PPC updates Rafael J. Wysocki
2019-03-26 11:16 ` [PATCH v3 2/4] cpufreq: Add cpufreq_cpu_acquire() and cpufreq_cpu_release() Rafael J. Wysocki
2019-03-26 11:18 ` [PATCH v3 3/4] cpufreq: schedutil: Simplify iowait boosting Rafael J. Wysocki
2019-03-28 9:48 ` Quentin Perret
2019-03-28 10:24 ` Rafael J. Wysocki
2019-03-28 10:33 ` [Update][PATCH " Rafael J. Wysocki
2019-04-01 9:27 ` Rafael J. Wysocki [this message]
2019-04-01 10:29 ` Peter Zijlstra
2019-04-08 5:54 ` Viresh Kumar
2019-03-26 11:19 ` [PATCH v3 4/4] cpufreq: intel_pstate: Update max frequency on global turbo changes Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=388546350.6JbkPPd9ra@aspire.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=gabriele.mzt@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=quentin.perret@arm.com \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=viresh.kumar@linaro.org \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®