mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Joao Pinto <Joao.Pinto@synopsys.com>,
	Jose Abreu <Jose.Abreu@synopsys.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <Jose.Abreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 net-next 6/7] net: stmmac: Rework TX Coalesce logic
Date: Thu, 14 Nov 2019 12:42:50 +0100	[thread overview]
Message-ID: <38f4e95c85da24c443efeac7cd8823ab99f94d28.1573731453.git.Jose.Abreu@synopsys.com> (raw)
In-Reply-To: <cover.1573731453.git.Jose.Abreu@synopsys.com>
In-Reply-To: <cover.1573731453.git.Jose.Abreu@synopsys.com>

Coalesce logic currently increments the number of packets and sets the
IC bit when the coalesced packets have passed a given limit. This does
not reflect very well what coalesce was meant for as we can have a large
number of packets that are coalesced and then a single one, sent later
on that has the IC bit.

Rework the logic so that it coalesces only upon a limit of packets and
sets the IC bit for large number of packets.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 61 ++++++++++++++++-------
 1 file changed, 42 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 400fbb727fd5..4ba250a9008f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2916,16 +2916,17 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int nfrags = skb_shinfo(skb)->nr_frags;
 	u32 queue = skb_get_queue_mapping(skb);
+	unsigned int first_entry, tx_packets;
+	int tmp_pay_len = 0, first_tx;
 	struct stmmac_tx_queue *tx_q;
-	unsigned int first_entry;
 	u8 proto_hdr_len, hdr;
-	int tmp_pay_len = 0;
+	bool has_vlan, set_ic;
 	u32 pay_len, mss;
 	dma_addr_t des;
-	bool has_vlan;
 	int i;
 
 	tx_q = &priv->tx_queue[queue];
+	first_tx = tx_q->cur_tx;
 
 	/* Compute header lengths */
 	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
@@ -3033,16 +3034,27 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 	tx_q->tx_skbuff[tx_q->cur_tx] = skb;
 
 	/* Manage tx mitigation */
-	tx_q->tx_count_frames += nfrags + 1;
-	if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
-	    !((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
-	      priv->hwts_tx_en)) {
-		stmmac_tx_timer_arm(priv, queue);
-	} else {
+	tx_packets = (tx_q->cur_tx + 1) - first_tx;
+	tx_q->tx_count_frames += tx_packets;
+
+	if ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)
+		set_ic = true;
+	else if (!priv->tx_coal_frames)
+		set_ic = false;
+	else if (tx_packets > priv->tx_coal_frames)
+		set_ic = true;
+	else if ((tx_q->tx_count_frames % priv->tx_coal_frames) < tx_packets)
+		set_ic = true;
+	else
+		set_ic = false;
+
+	if (set_ic) {
 		desc = &tx_q->dma_tx[tx_q->cur_tx];
 		tx_q->tx_count_frames = 0;
 		stmmac_set_tx_ic(priv, desc);
 		priv->xstats.tx_set_ic_bit++;
+	} else {
+		stmmac_tx_timer_arm(priv, queue);
 	}
 
 	/* We've used all descriptors we need for this skb, however,
@@ -3133,6 +3145,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
  */
 static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 {
+	unsigned int first_entry, tx_packets, enh_desc;
 	struct stmmac_priv *priv = netdev_priv(dev);
 	unsigned int nopaged_len = skb_headlen(skb);
 	int i, csum_insertion = 0, is_jumbo = 0;
@@ -3141,13 +3154,12 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	int gso = skb_shinfo(skb)->gso_type;
 	struct dma_desc *desc, *first;
 	struct stmmac_tx_queue *tx_q;
-	unsigned int first_entry;
-	unsigned int enh_desc;
+	bool has_vlan, set_ic;
+	int entry, first_tx;
 	dma_addr_t des;
-	bool has_vlan;
-	int entry;
 
 	tx_q = &priv->tx_queue[queue];
+	first_tx = tx_q->cur_tx;
 
 	if (priv->tx_path_in_lpi_mode)
 		stmmac_disable_eee_mode(priv);
@@ -3241,12 +3253,21 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * This approach takes care about the fragments: desc is the first
 	 * element in case of no SG.
 	 */
-	tx_q->tx_count_frames += nfrags + 1;
-	if (likely(priv->tx_coal_frames > tx_q->tx_count_frames) &&
-	    !((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
-	      priv->hwts_tx_en)) {
-		stmmac_tx_timer_arm(priv, queue);
-	} else {
+	tx_packets = (entry + 1) - first_tx;
+	tx_q->tx_count_frames += tx_packets;
+
+	if ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)
+		set_ic = true;
+	else if (!priv->tx_coal_frames)
+		set_ic = false;
+	else if (tx_packets > priv->tx_coal_frames)
+		set_ic = true;
+	else if ((tx_q->tx_count_frames % priv->tx_coal_frames) < tx_packets)
+		set_ic = true;
+	else
+		set_ic = false;
+
+	if (set_ic) {
 		if (likely(priv->extend_desc))
 			desc = &tx_q->dma_etx[entry].basic;
 		else
@@ -3255,6 +3276,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		tx_q->tx_count_frames = 0;
 		stmmac_set_tx_ic(priv, desc);
 		priv->xstats.tx_set_ic_bit++;
+	} else {
+		stmmac_tx_timer_arm(priv, queue);
 	}
 
 	/* We've used all descriptors we need for this skb, however,
-- 
2.7.4


  parent reply	other threads:[~2019-11-14 11:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-14 11:42 [PATCH v2 net-next 0/7] net: stmmac: CPU Performance Improvements Jose Abreu
2019-11-14 11:42 ` [PATCH v2 net-next 1/7] net: stmmac: Do not set RX IC bit if RX Coalesce is zero Jose Abreu
2019-11-14 11:42 ` [PATCH v2 net-next 2/7] net: stmmac: Setup a default RX Coalesce value instead of the minimum Jose Abreu
2019-11-14 11:42 ` [PATCH v2 net-next 3/7] net: stmmac: gmac4+: Remove uneeded computation for RFA/RFD Jose Abreu
2019-11-14 11:42 ` [PATCH v2 net-next 4/7] net: stmmac: xgmac: " Jose Abreu
2019-11-14 11:42 ` [PATCH v2 net-next 5/7] net: stmmac: Tune-up default coalesce settings Jose Abreu
2019-11-14 11:42 ` Jose Abreu [this message]
2019-11-14 11:42 ` [PATCH v2 net-next 7/7] net: stmmac: xgmac: Do not enable TBU interrupt Jose Abreu
2019-11-15 20:27 ` [PATCH v2 net-next 0/7] net: stmmac: CPU Performance Improvements David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=38f4e95c85da24c443efeac7cd8823ab99f94d28.1573731453.git.Jose.Abreu@synopsys.com \
    --to=jose.abreu@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®