mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "Peer, Ilan" <ilan.peer@intel.com>,
	Johannes Berg <johannes@sipsolutions.net>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	"Rojewski, Cezary" <cezary.rojewski@intel.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Jie Yang <yang.jie@linux.intel.com>,
	Mark Brown <broonie@kernel.org>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: [PATCH] cfg80211: Fix "suspicious RCU usage in wiphy_apply_custom_regulatory" warning/backtrace
Date: Mon, 18 Jan 2021 22:09:03 +0100	[thread overview]
Message-ID: <391ac436-9981-0f12-6e00-7a1bbe4d5c20@redhat.com> (raw)
In-Reply-To: <BN7PR11MB2610DDFBC90739A9D1FAED52E9D10@BN7PR11MB2610.namprd11.prod.outlook.com>

Hi,

On 1/5/21 10:24 AM, Peer, Ilan wrote:
> Hi,
> 
>> -----Original Message-----
>> From: Hans de Goede <hdegoede@redhat.com>
>> Sent: Monday, January 04, 2021 19:07
>> To: Johannes Berg <johannes@sipsolutions.net>; David S . Miller
>> <davem@davemloft.net>; Jakub Kicinski <kuba@kernel.org>; Rojewski,
>> Cezary <cezary.rojewski@intel.com>; Pierre-Louis Bossart <pierre-
>> louis.bossart@linux.intel.com>; Liam Girdwood
>> <liam.r.girdwood@linux.intel.com>; Jie Yang <yang.jie@linux.intel.com>;
>> Mark Brown <broonie@kernel.org>
>> Cc: Hans de Goede <hdegoede@redhat.com>; linux-
>> wireless@vger.kernel.org; netdev@vger.kernel.org; linux-
>> kernel@vger.kernel.org; alsa-devel@alsa-project.org; Peer, Ilan
>> <ilan.peer@intel.com>
>> Subject: [PATCH] cfg80211: Fix "suspicious RCU usage in
>> wiphy_apply_custom_regulatory" warning/backtrace
>>
>> Commit beee24695157 ("cfg80211: Save the regulatory domain when setting
>> custom regulatory") adds a get_wiphy_regdom call to
>> wiphy_apply_custom_regulatory. But as the comment above
>> wiphy_apply_custom_regulatory says:
>> "/* Used by drivers prior to wiphy registration */"
>> this function is used by driver's probe function before the wiphy is registered
>> and at this point wiphy->regd will typically by NULL and calling
>> rcu_dereference_rtnl on a NULL pointer causes the following
>> warning/backtrace:
>>
>> =============================
>> WARNING: suspicious RCU usage
>> 5.11.0-rc1+ #19 Tainted: G        W
>> -----------------------------
>> net/wireless/reg.c:144 suspicious rcu_dereference_check() usage!
>>
>> other info that might help us debug this:
>>
>> rcu_scheduler_active = 2, debug_locks = 1
>> 2 locks held by kworker/2:0/22:
>>  #0: ffff9a4bc104df38 ((wq_completion)events){+.+.}-{0:0}, at:
>> process_one_work+0x1ee/0x570
>>  #1: ffffb6e94010be78 ((work_completion)(&fw_work->work)){+.+.}-{0:0},
>> at: process_one_work+0x1ee/0x570
>>
>> stack backtrace:
>> CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G        W         5.11.0-rc1+ #19
>> Hardware name: LENOVO 60073/INVALID, BIOS 01WT17WW 08/01/2014
>> Workqueue: events request_firmware_work_func Call Trace:
>>  dump_stack+0x8b/0xb0
>>  get_wiphy_regdom+0x57/0x60 [cfg80211]
>>  wiphy_apply_custom_regulatory+0xa0/0xf0 [cfg80211]
>>  brcmf_cfg80211_attach+0xb02/0x1360 [brcmfmac]
>>  brcmf_attach+0x189/0x460 [brcmfmac]
>>  brcmf_sdio_firmware_callback+0x78a/0x8f0 [brcmfmac]
>>  brcmf_fw_request_done+0x67/0xf0 [brcmfmac]
>>  request_firmware_work_func+0x3d/0x70
>>  process_one_work+0x26e/0x570
>>  worker_thread+0x55/0x3c0
>>  ? process_one_work+0x570/0x570
>>  kthread+0x137/0x150
>>  ? __kthread_bind_mask+0x60/0x60
>>  ret_from_fork+0x22/0x30
>>
>> Add a check for wiphy->regd being NULL before calling get_wiphy_regdom
>> (as is already done in other places) to fix this.
>>
>> wiphy->regd will likely always be NULL when
>> wiphy->wiphy_apply_custom_regulatory
>> gets called, so arguably the tmp = get_wiphy_regdom() and
>> rcu_free_regdom(tmp) calls should simply be dropped, this patch keeps the
>> 2 calls, to allow drivers to call wiphy_apply_custom_regulatory more then
>> once if necessary.
>>
>> Cc: Ilan Peer <ilan.peer@intel.com>
>> Fixes: beee24695157 ("cfg80211: Save the regulatory domain when setting
>> custom regulator")
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>  net/wireless/reg.c | 5 +++--
>>  1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/net/wireless/reg.c b/net/wireless/reg.c index
>> bb72447ad960..9254b9cbaa21 100644
>> --- a/net/wireless/reg.c
>> +++ b/net/wireless/reg.c
>> @@ -2547,7 +2547,7 @@ static void handle_band_custom(struct wiphy
>> *wiphy,  void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
>>  				   const struct ieee80211_regdomain *regd)  {
>> -	const struct ieee80211_regdomain *new_regd, *tmp;
>> +	const struct ieee80211_regdomain *new_regd, *tmp = NULL;
>>  	enum nl80211_band band;
>>  	unsigned int bands_set = 0;
>>
>> @@ -2571,7 +2571,8 @@ void wiphy_apply_custom_regulatory(struct wiphy
>> *wiphy,
>>  	if (IS_ERR(new_regd))
>>  		return;
>>
>> -	tmp = get_wiphy_regdom(wiphy);
>> +	if (wiphy->regd)
>> +		tmp = get_wiphy_regdom(wiphy);
>>  	rcu_assign_pointer(wiphy->regd, new_regd);
>>  	rcu_free_regdom(tmp);
> 
> This only fixes the first case where the pointer in NULL and does not handle the wrong RCU usage in other cases.
> 
> I'll prepare a fix for this.

Any luck with this? This is a regression in 5.11, so this really should
be fixed in a future 5.11-rc and the clock is running out.

Regards,

Hans


  reply	other threads:[~2021-01-18 21:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-04 17:07 Hans de Goede
2021-01-05  9:24 ` Peer, Ilan
2021-01-18 21:09   ` Hans de Goede [this message]
2021-01-19  7:19     ` Peer, Ilan
2021-01-19 15:24     ` Peer, Ilan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=391ac436-9981-0f12-6e00-7a1bbe4d5c20@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=davem@davemloft.net \
    --cc=ilan.peer@intel.com \
    --cc=johannes@sipsolutions.net \
    --cc=kuba@kernel.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=yang.jie@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®