Re: [PATCH v1] arm64: dts: qcom: hamoa-iot-evk: Fix 4-speaker playback support

[Le Qi <le.qi@oss.qualcomm.com>]

On 10/9/2025 5:26 PM, Konrad Dybcio wrote:
> On 10/9/25 9:26 AM, leqi wrote:
>> On the HAMOA-IOT-EVK board only 2 out of 4 speakers were functional.
>> Unlike the CRD, which shares a single GPIO reset line for WSA1/2,
>> this board provides a dedicated GPIO reset for each WSA, resulting
>> in 4 separate reset lines.
>>
>> Update the device tree accordingly so that all 4 speakers can
>> playback audio as expected.
>>
>> Signed-off-by: leqi <le.qi@oss.qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 30 +++++++++++++++++-----
>>   1 file changed, 23 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
>> index df8d6e5c1f45..de9af19be6e8 100644
>> --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
>> +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
>> @@ -743,7 +743,7 @@ retimer_ss1_con_sbu_out: endpoint {
>>   };
>>   
>>   &lpass_tlmm {
>> -	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
>> +	spkr0_sd_n_active: spkr0-sd-n-active-state {
>>   		pins = "gpio12";
>>   		function = "gpio";
>>   		drive-strength = <16>;
>> @@ -751,13 +751,29 @@ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
>>   		output-low;
>>   	};
>>   
>> -	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
>> +	spkr1_sd_n_active: spkr1-sd-n-active-state {
>>   		pins = "gpio13";
>>   		function = "gpio";
>>   		drive-strength = <16>;
>>   		bias-disable;
>>   		output-low;
> 
> output- properties should be removed in favor of in-code gpiod_
> function calls, otherwise the reset gets asserted by the kernel as
> the OF node is being processed, unbeknownst to the then-not-yet-
> bound driver
> 
> [...]
> 
>> -	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
>> +	pinctrl-0 = <&wsa_swr_active>, <&spkr0_sd_n_active>, <&spkr1_sd_n_active>;
> 
> Similarly, because these pin configs relate to GPIOs connected to
> the speaker amps, and not the soundwire host, these entries should
> be split between each individual device
> 
> Konrad

Yes, will modify and test, thanks for pointing out.

-- 
Thx and BRs,
Le Qi