From: "Mihai Moldovanu" <mihaim@profm.ro>
To: linux-kernel@vger.kernel.org
Subject: 2.4.4-ac10 IDE Floppy Still hangs
Date: Fri, 18 May 2001 01:13:40 +0300 (EEST) [thread overview]
Message-ID: <3979.193.230.227.44.990137620.squirrel@radio.protv.ro> (raw)
Ok . There still is a problem even in 2.4.4-ac10 with IDE FLoppy .
Here is what i did and errors i got .
[root@m /mnt]# mount /dev/hdd4 /mnt/zip
ide-floppy: hdd: I/O error, pc = 5a, key = 5, asc = 24, ascq = 0
ide-floppy: hdd: I/O error, pc = 5a, key = 5, asc = 24, ascq = 0
[root@m /mnt]# mkdir /mnt/zip/test
[root@m /mnt]# sync
( at this point system seems to freeze, but after aprox 1 minute it recovers )
hdd: lost interrupt
ide-floppy: CoD != 0 in idefloppy_pc_intr
hdd: ATAPI reset complete
[root@m /mnt]#
This is my system configuration:
[root@m /mnt]# uname -a
Linux m 2.4.4-ac10 #1 Fri May 18 00:40:46 EEST 2001 i686 unknown
May 18 00:53:41 m kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
May 18 00:53:41 m kernel: VP_IDE: IDE controller on PCI bus 00 dev 39
May 18 00:53:41 m kernel: VP_IDE: chipset revision 6
May 18 00:53:41 m kernel: VP_IDE: not 100%% native mode: will probe irqs later
May 18 00:53:41 m kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
May 18 00:53:41 m kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100
controller on pci00:07.1
May 18 00:53:41 m kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings:
hda:DMA, hdb:pio
May 18 00:53:41 m kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings:
hdc:DMA, hdd:pio
May 18 00:53:41 m kernel: hda: IBM-DTLA-307030, ATA DISK drive
May 18 00:53:41 m kernel: hdc: Pioneer DVD-ROM ATAPIModel DVD-114 0124,
ATAPI CD/DVD-ROM drive
May 18 00:53:41 m kernel: hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
May 18 00:53:41 m kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 18 00:53:41 m kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 18 00:53:41 m kernel: hda: 60036480 sectors (30739 MB) w/1916KiB Cache,
CHS=29314/64/32, UDMA(100)
May 18 00:53:41 m kernel: hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
May 18 00:53:41 m kernel: Uniform CD-ROM driver Revision: 3.12
May 18 00:53:41 m kernel: hdd: 98304kB, 196608 blocks, 512 sector size,
May 18 00:53:41 m kernel: hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector
size, 2941 rpm
May 18 00:53:41 m kernel: ide-floppy: hdd: I/O error, pc = 5a, key = 5, asc
= 24, ascq = 0
Do you have any suggestions ?
--
TFM Group Romania , Linux division
Mihai Moldovanu
reply other threads:[~2001-05-17 22:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3979.193.230.227.44.990137620.squirrel@radio.protv.ro \
--to=mihaim@profm.ro \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®