Re: [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT overlay

[Wenmeng Liu <quic_wenmliu@qualcomm.com>]

On 9/11/2025 8:15 PM, Dmitry Baryshkov wrote:
> On Thu, Sep 11, 2025 at 07:55:16PM +0800, Wenmeng Liu wrote:
>> Enable IMX577 via CCI1 on LeMans EVK Core Kit.
>>
>> The LeMans EVK board does not include a camera sensor
>> by default, this overlay reflects the possibility of
>> attaching an optional camera sensor.
>> For this reason, the camera sensor configuration is
>> placed in lemans-evk-camera.dtso, rather than
>> modifying the base lemans-evk.dts.
> 
> So, is it the only camera configuration that we are going to support?
> If not, what happens when we get the second sensor or second set of
> sensors to support?
You're right, although currently we only plan to support the IMX577 on 
CCI1.>
>>
>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> Signed-off-by: Wenmeng Liu <quic_wenmliu@qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile               |  4 +
>>   arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 97 +++++++++++++++++++++++++
> 
> At least the filename should mention that this is imx577.
> 
>>   2 files changed, 101 insertions(+)
> 

Would lemans-evk-camera-csi1-imx577.dtso be a more appropriate name?
It more precisely describes the content of the dtso.

Thanks,
Wenmeng