From: rkreiner@sbox.tu-graz.ac.at
To: linux-kernel@vger.kernel.org, torvalds@transmeta.com
Subject: PROBLEM: multiple mount of devices possible 2.4.0-test1 - 2.4.0-test13-pre4
Date: Sat, 23 Dec 2000 18:20:36 +0100 [thread overview]
Message-ID: <3A44DEE4.2D94574F@sbox.tu-graz.ac.at> (raw)
1. multiple mount of devices possible 2.4.0-test1 - 2.4.0-test13-pre4
2. its still possible to mount devices several times.
IMHO it shouldnt be possible like 2.2.18
with umount in /proc/mounts is still the real information,
in /etc/mtab all corresponding mountpoints are deleted.
3. kernel, filesystem, mount
4. Linux version 2.4.0-test13-pre4 (root@apollo) (gcc version 2.95.2
19991024 (release)) #1 SMP Sat Dec 23 17:04:07 CET 2000
5. none
6. example
#!/bin/sh
mount /dev/hda2 /gate
mount -t nfs gate:/ /gate
mount -t nfs gate:/ /gate
mount /dev/hda2 /mnt
7.
7.1
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux apollo 2.4.0-test13-pre4 #1 SMP Sat Dec 23 17:04:07 CET 2000 i586
unknown
Kernel modules 2.3.11
Gnu C 2.95.2
Gnu Make 3.79.1
Binutils 2.9.5.0.24
Linux C Library x 1 root root 4070406 Jul 30 21:41
/lib/libc.so.6
Dynamic linker ldd (GNU libc) 2.1.3
Procps 2.0.6
Mount 2.10m
Net-tools 1.56
Kbd 0.99
Sh-utils 2.0
Modules Loaded
7.2
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 400.906
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr
bogomips : 799.54
7.3
7.4
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
5c20-5c3f : Acer Laboratories Inc. [ALi] M7101 PMU
d000-d00f : Acer Laboratories Inc. [ALi] M5229 IDE
d400-d43f : Ensoniq ES1371 [AudioPCI-97]
d400-d43f : es1371
d800-d8ff : Realtek Semiconductor Co., Ltd. RTL-8139
d800-d8ff : eth0
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffbfff : System RAM
00100000-002ef4af : Kernel code
002ef4b0-0031193f : Kernel data
07ffc000-07ffefff : ACPI Tables
07fff000-07ffffff : ACPI Non-volatile Storage
de000000-de0000ff : Realtek Semiconductor Co., Ltd. RTL-8139
de000000-de0000ff : eth0
df000000-dfffffff : PCI Bus #01
df000000-df7fffff : Matrox Graphics, Inc. MGA G400 AGP
df800000-df803fff : Matrox Graphics, Inc. MGA G400 AGP
e0000000-e3ffffff : Acer Laboratories Inc. [ALi] M1541
e5f00000-e7ffffff : PCI Bus #01
e6000000-e7ffffff : Matrox Graphics, Inc. MGA G400 AGP
ffff0000-ffffffff : reserved
7.5
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP
System Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [b0] AGP version 1.0
Status: RQ=28 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: df000000-dfffffff
Prefetchable memory behind bridge: e5f00000-e7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:03.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Subsystem: Acer Laboratories Inc. [ALi] ALI M7101 Power Management
Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV] (rev c3)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
Latency: 0
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:0b.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev
06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at d000 [size=16]
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 03) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SGRAM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at df800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e5ff0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
7.6
7.7
Mount Version:
mount: mount-2.10m
Output of /proc/mounts:
/dev/root / ext2 rw 0 0
proc /proc proc rw 0 0
/dev/hda7 /home ext2 rw 0 0
/dev/hda9 /data vfat rw 0 0
/dev/hda8 /datax vfat rw 0 0
/dev/hda10 /data2 vfat rw 0 0
/dev/hdb1 /data3 vfat rw 0 0
/dev/hda3 /win98 vfat rw 0 0
/dev/hda6 /redhat ext2 rw 0 0
/dev/hda11 /sicher ext2 ro 0 0
/dev/hda13 /sicher2 ext2 ro 0 0
/dev/hdb6 /sicher3 ext2 rw 0 0
devpts /dev/pts devpts rw 0 0
/dev/hda2 /gate vfat rw 0 0
gate:/ /gate nfs rw,v2,rsize=8192,wsize=8192,hard,udp,lock,addr=gate 0 0
gate:/ /gate nfs rw,v2,rsize=8192,wsize=8192,hard,udp,lock,addr=gate 0 0
/dev/hda2 /mnt vfat rw 0 0
X.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2000-12-23 17:48 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-23 17:20 rkreiner [this message]
2000-12-23 18:24 ` FEATURE (was " Tigran Aivazian
2000-12-24 19:31 ` FEATURE (was Re: PROBLEM: multiple mount of devices possible2.4.0-test1 " rkreiner
2000-12-23 19:11 ` PROBLEM: multiple mount of devices possible 2.4.0-test1 " Linus Torvalds
2000-12-30 23:04 ` Ton Hospel
2000-12-30 23:57 ` Alexander Viro
2000-12-31 3:18 ` Ton Hospel
2000-12-31 9:13 ` Andries Brouwer
2000-12-31 3:48 ` PROBLEM: multiple mount of devices possible 2.4.0-test1 - Albert D. Cahalan
2000-12-31 4:09 ` Alexander Viro
2000-12-31 3:58 ` Steve VanDevender
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A44DEE4.2D94574F@sbox.tu-graz.ac.at \
--to=rkreiner@sbox.tu-graz.ac.at \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®