From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 5 Jan 2001 15:43:15 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 5 Jan 2001 15:43:04 -0500 Received: from acct2.voicenet.com ([207.103.26.205]:4510 "HELO voicenet.com") by vger.kernel.org with SMTP id ; Fri, 5 Jan 2001 15:42:53 -0500 Message-ID: <3A5631CB.C0E3E4C1@voicenet.com> Date: Fri, 05 Jan 2001 15:42:52 -0500 From: safemode Organization: none X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.0-prerelease i686) X-Accept-Language: en MIME-Version: 1.0 To: "Grover, Andrew" CC: linux-kernel@vger.kernel.org, "Acpi-linux (E-mail)" Subject: Re: ACPI in Via Apollo (vt82C686) broken badly in 2.4.x ? In-Reply-To: <4148FEAAD879D311AC5700A0C969E8905DE572@orsmsx35.jf.intel.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org "Grover, Andrew" wrote: > > From: safemode [mailto:safemode@voicenet.com] > > > Well, it seems the only way to look at sensor readings with > > lmsensors is > > to activate acpi in linux for my motherboard. > > Can you please send me the output from dmesg, as well as /proc/interrupts? I > don't think anyone's tried lmsensors and acpi. It may be that they will need > some work to coexist.. > > > According to > > the docs, my > > motherboard is supposed to be supported and is detected when linux > > boots, the problem comes when i try to move the mouse (in console and > > X). It totally flips out, i get irregular mouse movement across the > > screen and button clicks when i just barely touched it. It > > is directly > > related to enabling acpi so i was wondering if anyone else > > has had this > > problem and if there was/is a fix for it or if it's a bug right now. > > If there is specific debugging info that i can get to help, tell me > > where... dmesg just shows successful messages. > > Never seen that before.. does /proc/interrupts indicate mouse driver and > acpi are sharing one? > > Regards -- Andy (ACPI maintainer) The problem wasn't actually with lmsensors together with ACPI yet... Just enabling ACPI with this board causes the mouse to go insane. i will however recompile the stock 2.4.0 kernel that recently came out to test it again. I'll give you output from dmesg and /proc/interrupts before lmsensors is loaded and after (after a new recompile of the drivers too). I can tell you know though, the acpi bus? is running on int 5 according to the bios. ... Should have the output ready within the hour. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/