From: Daniel Chemko <dchemko@intrinsyc.com>
To: linux-kernel@vger.kernel.org
Subject: 3c59x problems on all 2.4 Kernels?
Date: Sat, 06 Jan 2001 04:35:58 -0500 [thread overview]
Message-ID: <3A56E6FE.6F61A2C4@intrinsyc.com> (raw)
I am using a 3Com 905C Tornado Vortex Driver and the official 2.4.0, and
the driver does not start up. I think I had the same problem with this
driver in the 2.2 kernel, which forced me to use 3com's 3c90x, which is
not available for 2.4. Below are the specs:
Sorry for not including more, info but I am leaving for home in like
30min ;)
This was what 'Messages' gave me:
Jan 5 06:32:17 cookiemonster kernel: 3c59x.c:LK1.1.11 13 Nov 2000
Donald Becker and others. http://www.scyld.com/network/vortex.html
$Revision: 1.102.2.46 $
Jan 5 06:32:17 cookiemonster kernel: See
Documentation/networking/vortex.txt
Jan 5 06:32:17 cookiemonster kernel: eth0: 3Com PCI 3c905C Tornado at
0xb800, PCI: Found IRQ 9 for device 02:0a.0
Jan 5 06:32:17 cookiemonster kernel: PCI: Setting latency timer of
device 02:0a.0 to 64
Jan 5 06:32:17 cookiemonster kernel: 00:01:03:1f:73:76, IRQ 9
Jan 5 06:32:17 cookiemonster kernel: 8K byte-wide RAM 5:3 Rx:Tx
split, autoselect/Autonegotiate interface.
Jan 5 06:32:17 cookiemonster kernel: MII transceiver found at address
1, status 24.
Jan 5 06:32:17 cookiemonster kernel: MII transceiver found at address
2, status 24.
Jan 5 06:32:17 cookiemonster kernel: Enabling bus-master transmits
and whole-frame receives.
Jan 5 06:32:29 cookiemonster kernel: eth0: using NWAY autonegotiation
Jan 5 06:32:29 cookiemonster kernel: eth0: command 0x2800 did not
complete! Status=0x7000
>From lspci -vx
02:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 78)
Subsystem: 3Com Corporation: Unknown device 1000
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b800
Memory at f5000000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
00: b7 10 00 92 17 00 10 02 78 00 00 02 08 00 00 00
10: 01 b8 00 00 00 00 00 f5 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b7 10 00 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 0a 0a
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-01-06 0:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-06 9:35 Daniel Chemko [this message]
2001-01-06 12:20 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A56E6FE.6F61A2C4@intrinsyc.com \
--to=dchemko@intrinsyc.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®