Motherboard is ASUS P2B (BX/PIIX4) w/Intel P3-550 Katmai. No OCing, RAM is perfectly OK (been using it for a year). hda = Quantum Fireball ST3.2A hdb = IBM-DTLA-307045 I know i should have them in separate IDE channels, but for now i was setting up LVM to move another fast/big disk in. Kernel is plain + reiserfs 3.6.25, devfs isn't enabled. GCC is 2.95.2, on redhat 6.2, with lvmtools 0.9. Kernel config & ksymoops attached. I was just trying LVM's vgextend, maybe i'm missing something?? LVM works as long as i don't try to extend the VG. I can do testing/patching without trouble here... **** BAD BOY **** # pvcreate /dev/hdb1 pvcreate -- physical volume "/dev/hdb1" successfully created # pvcreate /dev/hdb2 pvcreate -- physical volume "/dev/hdb2" successfully created # pvcreate /dev/hdb3 pvcreate -- physical volume "/dev/hdb3" successfully created # vgcreate vg0 /dev/hdb1 vgcreate -- INFO: using default physical extent size 4 MB vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte vgcreate -- doing automatic backup of volume group "vg0" vgcreate -- volume group "vg0" successfully created and activated # vgextend vg0 /dev/hdb2 vgextend -- INFO: maximum logical volume size is 255.99 Gigabyte Segmentation fault # pvscan pvscan -- reading all physical volumes (this may take a while...) pvscan -- ACTIVE PV "/dev/hdb1" of VG "vg0" [13.79 GB / 13.79 GB free] pvscan -- inactive PV "/dev/hdb2" is in no VG [13.79 GB] pvscan -- inactive PV "/dev/hdb3" is in no VG [15.37 GB] pvscan -- total: 3 [42.94 GB] / in use: 1 [13.79 GB] / in no VG: 2 [29.16 GB] **** GOOD BOY **** # vgcreate vg0 /dev/hdb1 /dev/hdb2 /dev/hdb3 vgcreate -- INFO: using default physical extent size 4 MB vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte vgcreate -- doing automatic backup of volume group "vg0" vgcreate -- volume group "vg0" successfully created and activated # vgscan vgscan -- reading all physical volumes (this may take a while...) vgscan -- found active volume group "vg0" vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: you may not have an actual VGDA backup of your volume group # vgdisplay --- Volume group --- VG Name vg0 VG Access read/write VG Status available/resizable VG # 0 MAX LV 256 Cur LV 0 Open LV 0 MAX LV Size 255.99 GB Max PV 256 Cur PV 3 Act PV 3 VG Size 42.93 GB PE Size 4 MB Total PE 10991 Alloc PE / Size 0 / 0 Free PE / Size 10991 / 42.93 GB VG UUID T64Tvz-nAb6-0Ew9-B3Qv-VuBy-7wxP-S7E77r -- fdisk partition table for /dev/hdb -- Disk /dev/hdb: 255 heads, 63 sectors, 5606 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 1800 14458468+ 8e Linux LVM /dev/hdb2 1801 3600 14458500 8e Linux LVM /dev/hdb3 3601 5606 16113195 8e Linux LVM