From: Christian Gennerat <christian.gennerat@vz.cit.alcatel.fr>
To: paul@paulbristow.net
Cc: Linux-Kernel <linux-kernel@vger.kernel.org>,
David Hinds <dhinds@sonic.net>
Subject: Re: PCMCIA problem loading ide-floppy from ide_cs
Date: Thu, 18 Jan 2001 09:59:50 +0100 [thread overview]
Message-ID: <3A66B086.F0E81BB8@vz.cit.alcatel.fr> (raw)
In-Reply-To: <3A65FD84.129CA315@Hell.WH8.TU-Dresden.De> <01011722372302.01013@zoltar.quantum.net>
Paul Bristow a écrit :
> Hi,
>
> I am trying to understand the new PCMCIA configuration. So far I am trying
> to use the kernel PCMCIA driver. The yenta_socket driver is working fine.
>
> Using 2.4.0, and cardmgr 3.1.23
>
> When I insert my Iomega Clik drive, cardmgr correctly identifies it as an ATA
> Fixed Disk and loads ide_cs. ide_cs does the ide_probe and correctly assumes
> that the drive is an ide-floppy. However at this point it doesn't seem to
> even try to load the module. KMOD is set to y in .config
>
> If I preload the ide-floppy module everything loads up fine and I can use the
> drive perfectly. However, when I do a cardctl eject 0, everything screws up.
> The eject command says it works, unlinks ide_cs, but seems to leave
> ide-floppy working! and yes, I have run depmod -a about a zillion times.
>
> modprobe -nv finds the modules no problem.
with modutils-2.4.1-1mdk I had to create some new sym-links
# ls -l /lib/modules/2.4.0-2mdk/pcmcia/
total 0
lrwxrwxrwx ide_cs.o -> ../kernel/drivers/ide/ide-cs.o
lrwxrwxrwx floppy.o -> ../kernel/drivers/block/floppy.o
lrwxrwxrwx floppy_cs.o -> ../kernel/drivers/block/floppy_cs.o
-
I think you must do the same for ide-floppy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
prev parent reply other threads:[~2001-01-18 9:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-17 20:16 [OOPS] with 2.2.18 Udo A. Steinberg
2001-01-17 21:37 ` PCMCIA problem loading ide-floppy from ide_cs Paul Bristow
2001-01-18 8:59 ` Christian Gennerat [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A66B086.F0E81BB8@vz.cit.alcatel.fr \
--to=christian.gennerat@vz.cit.alcatel.fr \
--cc=dhinds@sonic.net \
--cc=linux-kernel@vger.kernel.org \
--cc=paul@paulbristow.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®