From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 24 Jan 2001 10:20:36 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 24 Jan 2001 10:20:27 -0500 Received: from mail.iex.net ([192.156.196.5]:61410 "EHLO mail.iex.net") by vger.kernel.org with ESMTP id ; Wed, 24 Jan 2001 10:20:05 -0500 Message-ID: <3A6EF2A1.286092D5@iex.net> Date: Wed, 24 Jan 2001 08:20:01 -0700 From: Tim Sullivan X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.1-pre10 i686) X-Accept-Language: en MIME-Version: 1.0 To: Matt_Domsch@Dell.com CC: Kernel Mailing List Subject: Re: No SCSI Ultra 160 with Adaptec Controller In-Reply-To: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Matt_Domsch@Dell.com wrote: > > > Justin's 6.0.9beta(latest release) hasn't corrected the problem yet. > > > > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.0.9 BETA > > > > aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs > > > > Vendor: QUANTUM Model: ATLAS10K2-TY367L Rev: DDD6 > > Type: Direct-Access ANSI SCSI revision: 03 > > (scsi0:A:0): async, 8bit > > scsi0:0:0:0: Tagged Queuing enabled. Depth 8 > > Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 > > (scsi0:A:0): async, 16bit > > (scsi0:A:0): synchronous at 80.0MHz DT, offset 0x7f, 16bit > > SCSI device sda: 71721820 512-byte hdwr sectors (36722 MB) > > I could still be wrong, but 80 MHz * 16 bits (2 bytes) = 160 MB/sec. > We are testing Justin's driver internally. I'll grab our SCSI disk guys and > make sure it's up to speed. > > Thanks, > Matt My apologies, you're right of course :-) I was seeing MHz and thinking MB! Thanks, tim - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/