> mharrell@bittwiddlers.com
> >Just realized that some of those symbols were defined in the via82cxxx_audio
> >module and I needed to load it to get them recognized.  As long as I don't
> >play any sounds the module will load fine so here is the new and improved
> >ksymoops output

> >>>EIP; d883a0a0 <[via82cxxx_audio]via_intr_channel+90/120>   <=====
> >Trace; d883a15f <[via82cxxx_audio]via_interrupt+2f/70>
> >Trace; c010a2bf <handle_IRQ_event+2f/60>
> >Trace; c010a43e <do_IRQ+6e/b0>
> >Trace; c0108f80 <ret_from_intr+0/20>
> >Trace; c01f480a <acpi_idle+1ea/2b0>
> >Trace; c01f4620 <acpi_idle+0/2b0>
> >Trace; c0107130 <default_idle+0/30>
> >Trace; c01071c2 <cpu_idle+42/60>
> >Trace; c0105000 <empty_bad_page+0/1000>
> >Trace; c0100191 <L6+0/2>
> >Code;  d883a0a0 <[via82cxxx_audio]via_intr_channel+90/120>
> >00000000 <_EIP>:
> >Code;  d883a0a0 <[via82cxxx_audio]via_intr_channel+90/120>   <=====
> >   0:   89 44 f2 04               mov    %eax,0x4(%edx,%esi,8)   <=====

Ouch.  After applying the attached patch, do any of the assertions
trigger?  (You should get a message 'Assertion failed! ...' right before
the oops)

	Jeff


-- 
Jeff Garzik       | "You see, in this world there's two kinds of
Building 1024     |  people, my friend: Those with loaded guns
MandrakeSoft      |  and those who dig. You dig."  --Blondie