mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Manfred Spraul <manfred@colorfullife.com>
To: Martin Josefsson <gandalf@wlug.westbo.se>
Cc: macro@ds2.pg.gda.pl, linux-kernel@vger.kernel.org
Subject: Re: APIC lockup in 2.4.x-x
Date: Tue, 06 Feb 2001 18:17:30 +0100	[thread overview]
Message-ID: <3A8031AA.1FFDF6AE@colorfullife.com> (raw)
In-Reply-To: <Pine.LNX.4.21.0102061559520.25695-100000@tux.rsn.hk-r.se>

[-- Attachment #1: Type: text/plain, Size: 727 bytes --]

Martin Josefsson wrote:
> 
> Hi
> 
> I saw your patch for the APIC lockup and I saw that it was included in
> 2.4.1-ac2 so I tried that one.. but it didn't help..
> 
> I can begin with describing my machine:
> 
> dual pIII 800 (133MHz FSB)
> Asus P3C-D mainboard with i820 chipset
> 256MB rimm (rambus)
> Dlink DFE570TX (4 port tulip card)
> Adaptec 29160 scsicard and 18GB scsidisk.
>

Could you apply the attached patch, enable sysrq, compile & install the
kernel, reboot and press sysrq-q after ifup?

We assumed that only the old io apic for 440 BX boards is affected, but
your board contains a newer apic intrated in the ICH.

But probably you ran into another bug - the tulip driver doesn't use
disable_irq()

--
	Manfred

[-- Attachment #2: u4u5 --]
[-- Type: text/plain, Size: 2365 bytes --]

// $Header$
// Kernel Version:
//  VERSION = 2
//  PATCHLEVEL = 4
//  SUBLEVEL = 1
//  EXTRAVERSION =
--- 2.4/drivers/net/tulip/tulip_core.c	Sat Feb  3 14:02:54 2001
+++ build-2.4/drivers/net/tulip/tulip_core.c	Sat Feb  3 14:04:58 2001
@@ -421,6 +421,24 @@
 
 	tulip_up (dev);
 
+	disable_irq(dev->irq);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(10);
+
+{
+	long ioaddr = dev->base_addr;
+	long csr7 = inl(ioaddr + CSR7);
+	outl(NormalIntr|AbnormalIntr|TPLnkPass|TPLnkFail, ioaddr + CSR7);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(10);
+	enable_irq(dev->irq);
+
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	schedule_timeout(10);
+	outl(csr7, ioaddr + CSR7);
+
+}
+
 	netif_start_queue (dev);
 
 	return 0;
--- 2.4/arch/i386/kernel/io_apic.c	Sat Feb  3 14:02:24 2001
+++ build-2.4/arch/i386/kernel/io_apic.c	Sat Feb  3 14:54:14 2001
@@ -693,7 +693,7 @@
 	printk(KERN_WARNING "          to linux-smp@vger.kernel.org\n");
 }
 
-void __init print_IO_APIC(void)
+void print_IO_APIC(void)
 {
 	int apic, i;
 	struct IO_APIC_reg_00 reg_00;
@@ -1189,14 +1189,22 @@
 
 #define shutdown_level_ioapic_irq	mask_IO_APIC_irq
 #define enable_level_ioapic_irq		unmask_IO_APIC_irq
-#define disable_level_ioapic_irq	mask_IO_APIC_irq
+static void disable_level_ioapic_irq(unsigned int i)
+{
+	/* delayed. */
+}
 
 static void end_level_ioapic_irq (unsigned int i)
 {
 	ack_APIC_irq();
 }
 
-static void mask_and_ack_level_ioapic_irq (unsigned int i) { /* nothing */ }
+static void mask_and_ack_level_ioapic_irq (unsigned int i)
+{
+	if (irq_desc[i].status & IRQ_DISABLED) {
+		mask_IO_APIC_irq(i);
+	}
+}
 
 static void set_ioapic_affinity (unsigned int irq, unsigned long mask)
 {
--- 2.4/arch/i386/kernel/apic.c	Sat Feb  3 14:02:24 2001
+++ build-2.4/arch/i386/kernel/apic.c	Sat Feb  3 14:42:47 2001
@@ -270,7 +270,7 @@
 	 *   PCI Ne2000 networking cards and PII/PIII processors, dual
 	 *   BX chipset. ]
 	 */
-#if 0
+#if 1
 	/* Enable focus processor (bit==0) */
 	value &= ~(1<<9);
 #else
--- 2.4/drivers/char/sysrq.c	Mon Dec  4 02:48:19 2000
+++ build-2.4/drivers/char/sysrq.c	Sat Feb  3 14:33:51 2001
@@ -137,6 +137,10 @@
 		send_sig_all(SIGKILL, 1);
 		orig_log_level = 8;
 		break;
+	case 'q':
+		print_all_local_APICs();
+		print_IO_APIC();
+		break;
 	default:					    /* Unknown: help */
 		if (kbd)
 			printk("unRaw ");









  reply	other threads:[~2001-02-06 17:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-02-06 15:14 Martin Josefsson
2001-02-06 17:17 ` Manfred Spraul [this message]
2001-02-06 18:10   ` Martin Josefsson
2001-02-07 17:24   ` Martin Josefsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3A8031AA.1FFDF6AE@colorfullife.com \
    --to=manfred@colorfullife.com \
    --cc=gandalf@wlug.westbo.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=macro@ds2.pg.gda.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®