From: Javier Gonzalez <javier@cnexlabs.com>
To: "Dziegielewski, Marcin" <marcin.dziegielewski@intel.com>
Cc: "Matias Bjørling" <mb@lightnvm.io>, "Jens Axboe" <axboe@fb.com>,
"linux-block@vger.kernel.org" <linux-block@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Konopko, Igor J" <igor.j.konopko@intel.com>
Subject: Re: [GIT PULL 18/20] lightnvm: pblk: handle case when mw_cunits equals to 0
Date: Mon, 4 Jun 2018 11:15:50 +0000 [thread overview]
Message-ID: <3A87DF02-6471-4B92-9DDC-4E0FD98249A4@cnexlabs.com> (raw)
In-Reply-To: <9FC4315EA6BEAA449828D92CF173A10D3E3833ED@IRSMSX109.ger.corp.intel.com>
> On 4 Jun 2018, at 13.11, Dziegielewski, Marcin <marcin.dziegielewski@intel.com> wrote:
>
>> -----Original Message-----
>> From: Javier Gonzalez [mailto:javier@cnexlabs.com]
>> Sent: Monday, June 4, 2018 12:22 PM
>> To: Dziegielewski, Marcin <marcin.dziegielewski@intel.com>
>> Cc: Matias Bjørling <mb@lightnvm.io>; Jens Axboe <axboe@fb.com>; linux-
>> block@vger.kernel.org; linux-kernel@vger.kernel.org; Konopko, Igor J
>> <igor.j.konopko@intel.com>
>> Subject: Re: [GIT PULL 18/20] lightnvm: pblk: handle case when mw_cunits
>> equals to 0
>>
>>> On 4 Jun 2018, at 12.09, Dziegielewski, Marcin
>> <marcin.dziegielewski@intel.com> wrote:
>>> Frist of all I want to say sorry for late response - I was on holiday.
>>>
>>>> From: Javier Gonzalez [mailto:javier@cnexlabs.com]
>>>> Sent: Monday, May 28, 2018 1:03 PM
>>>> To: Matias Bjørling <mb@lightnvm.io>
>>>> Cc: Jens Axboe <axboe@fb.com>; linux-block@vger.kernel.org; linux-
>>>> kernel@vger.kernel.org; Dziegielewski, Marcin
>>>> <marcin.dziegielewski@intel.com>; Konopko, Igor J
>>>> <igor.j.konopko@intel.com>
>>>> Subject: Re: [GIT PULL 18/20] lightnvm: pblk: handle case when
>>>> mw_cunits equals to 0
>>>>
>>>>> On 28 May 2018, at 10.58, Matias Bjørling <mb@lightnvm.io> wrote:
>>>>>
>>>>> From: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
>>>>>
>>>>> Some devices can expose mw_cunits equal to 0, it can cause creation
>>>>> of too small write buffer and cause performance to drop on write
>>>>> workloads.
>>>>>
>>>>> To handle that, we use the default value for MLC and beacause it
>>>>> covers both 1.2 and 2.0 OC specification, setting up mw_cunits in
>>>>> nvme_nvm_setup_12 function isn't longer necessary.
>>>>>
>>>>> Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
>>>>> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
>>>>> Signed-off-by: Matias Bjørling <mb@lightnvm.io>
>>>>> ---
>>>>> drivers/lightnvm/pblk-init.c | 10 +++++++++-
>>>>> drivers/nvme/host/lightnvm.c | 1 -
>>>>> 2 files changed, 9 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/lightnvm/pblk-init.c
>>>>> b/drivers/lightnvm/pblk-init.c index d65d2f972ccf..0f277744266b
>>>>> 100644
>>>>> --- a/drivers/lightnvm/pblk-init.c
>>>>> +++ b/drivers/lightnvm/pblk-init.c
>>>>> @@ -356,7 +356,15 @@ static int pblk_core_init(struct pblk *pblk)
>>>>> atomic64_set(&pblk->nr_flush, 0);
>>>>> pblk->nr_flush_rst = 0;
>>>>>
>>>>> - pblk->pgs_in_buffer = geo->mw_cunits * geo->all_luns;
>>>>> + if (geo->mw_cunits) {
>>>>> + pblk->pgs_in_buffer = geo->mw_cunits * geo->all_luns;
>>>>> + } else {
>>>>> + pblk->pgs_in_buffer = (geo->ws_opt << 3) * geo->all_luns;
>>>>> + /*
>>>>> + * Some devices can expose mw_cunits equal to 0, so let's
>>>> use
>>>>> + * here default safe value for MLC.
>>>>> + */
>>>>> + }
>>>>>
>>>>> pblk->min_write_pgs = geo->ws_opt * (geo->csecs / PAGE_SIZE);
>>>>> max_write_ppas = pblk->min_write_pgs * geo->all_luns; diff --git
>>>>> a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c index
>>>>> 41279da799ed..c747792da915 100644
>>>>> --- a/drivers/nvme/host/lightnvm.c
>>>>> +++ b/drivers/nvme/host/lightnvm.c
>>>>> @@ -338,7 +338,6 @@ static int nvme_nvm_setup_12(struct
>>>> nvme_nvm_id12
>>>>> *id,
>>>>>
>>>>> geo->ws_min = sec_per_pg;
>>>>> geo->ws_opt = sec_per_pg;
>>>>> - geo->mw_cunits = geo->ws_opt << 3; /* default to MLC safe values
>>>> */
>>>>> /* Do not impose values for maximum number of open blocks as it is
>>>>> * unspecified in 1.2. Users of 1.2 must be aware of this and
>>>>> eventually
>>>>> --
>>>>> 2.11.0
>>>>
>>>> By doing this, 1.2 future users (beyond pblk), will fail to have a
>>>> valid mw_cunits value. It's ok to deal with the 0 case in pblk, but I
>>>> believe that we should have the default value for 1.2 either way.
>>>
>>> I'm not sure. From my understanding, setting of default value was
>>> workaround for pblk case, am I right ?.
>>
>> The default value covers the MLC case directly at the lightnvm layer, as
>> opposed to doing it directly in pblk. Since pblk is the only user now, you can
>> argue that all changes in the lightnvm layer are to solve pblk issues, but the
>> idea is that the geometry should be generic.
>>
>>> In my opinion any user of 1.2
>>> spec should be aware that there is not mw_cunit value. From my point
>>> of view, leaving here 0 (and decision what do with it to lightnvm
>>> user) is more safer way, but maybe I'm wrong. I believe that it is
>>> topic to wider discussion with maintainers.
>>
>> 1.2 and 2.0 have different geometries, but when we designed the common
>> nvm_geo structure, the idea was to abstract both specs and allow the upper
>> layers to use the geometry transparently.
>>
>> Specifically in pblk, I would prefer to keep it in such a way that we don't need
>> to media specific policies (e.g., set default values for MLC memories), as a
>> general design principle. We already do some geometry version checks to
>> avoid dereferencing unnecessary pointers on the fast path, which I would
>> eventually like to remove.
>
> Ok, now I understand your point of view and agree with that, I will
> prepare second version of this patch without this change.
Sounds good.
> Thanks for
> the clarification.
>
Sure :)
>>>> A more generic way of doing this would be to have a default value for
>>>> 2.0 too, in case mw_cunits is reported as 0.
>>>
>>> Since 0 is correct value and users can make different decisions based
>>> on it, I think we shouldn't overwrite it by default value. Is it make
>>> sense?
>>
>> Here I meant at a pblk level - I should have specified it. At the geometry
>> level, we should not change it.
>>
>> The case I am thinking is if mw_cuints repoints 0, but ws_min > 0. In this case,
>> we still need a host side buffer to serve < ws_min I/Os, even though the
>> device does not require the buffer to guarantee reads.
>
> Oh, ok now we are on the same page. In this patch I was trying to
> address such case. Do you have other idea how to do it or here are you
> thinking only on value of default variable?
If doing this, I guess that something in the line of what you did with
increasing the size of the write buffer via a module parameter. For
example, checking if the size of the write buffer based on mw_cuints is
enough to cover ws_min, which normally would only be an issue when
mw_cuints == 0 or when the number of PUs used for the pblk instance is
very small and mw_cuints < nr_luns * ws_min.
>
>>>> Javier
>>>
>>> Thanks,
>>> Marcin
>>
>> Javier
> Thanks,
> Marcin
next prev parent reply other threads:[~2018-06-04 11:15 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 8:58 [GIT PULL 00/20] lightnvm updates for 4.18 Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 01/20] lightnvm: pblk: fail gracefully on line alloc. failure Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 02/20] lightnvm: pblk: recheck for bad lines at runtime Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 03/20] lightnvm: pblk: check read lba on gc path Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 04/20] lightnvm: pblk: improve error msg on corrupted LBAs Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 05/20] lightnvm: pblk: warn in case of corrupted write buffer Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 06/20] lightnvm: pblk: return NVM_ error on failed submission Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 07/20] lightnvm: pblk: remove unnecessary indirection Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 08/20] lightnvm: pblk: remove unnecessary argument Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 09/20] lightnvm: pblk: check for chunk size before allocating it Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 10/20] lightnvm: pass flag on graceful teardown to targets Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 11/20] lightnvm: pblk: remove dead function Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 12/20] lightnvm: pblk: rework write error recovery path Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 13/20] lightnvm: pblk: garbage collect lines with failed writes Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 14/20] lightnvm: pblk: fix smeta write error path Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 15/20] lightnvm: proper error handling for pblk_bio_add_pages Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 16/20] lightnvm: error handling when whole line is bad Matias Bjørling
2018-05-28 10:59 ` Javier Gonzalez
2018-05-29 13:15 ` Konopko, Igor J
2018-05-29 18:29 ` Javier Gonzalez
2018-05-28 8:58 ` [GIT PULL 17/20] lightnvm: fix partial read error path Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 18/20] lightnvm: pblk: handle case when mw_cunits equals to 0 Matias Bjørling
2018-05-28 11:02 ` Javier Gonzalez
2018-06-04 10:09 ` Dziegielewski, Marcin
2018-06-04 10:21 ` Javier Gonzalez
2018-06-04 11:11 ` Dziegielewski, Marcin
2018-06-04 11:15 ` Javier Gonzalez [this message]
2018-06-04 17:17 ` Dziegielewski, Marcin
2018-06-05 7:12 ` Javier Gonzalez
2018-06-05 9:18 ` Dziegielewski, Marcin
2018-05-28 8:58 ` [GIT PULL 19/20] lightnvm: pblk: add possibility to set write buffer size manually Matias Bjørling
2018-05-28 8:58 ` [GIT PULL 20/20] lightnvm: pblk: sync RB and RL states during GC Matias Bjørling
2018-05-28 10:51 ` Javier Gonzalez
2018-05-29 13:07 ` Konopko, Igor J
2018-05-29 17:58 ` Javier Gonzalez
2018-06-01 10:45 ` [GIT PULL 00/20] lightnvm updates for 4.18 Matias Bjørling
2018-06-01 12:36 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A87DF02-6471-4B92-9DDC-4E0FD98249A4@cnexlabs.com \
--to=javier@cnexlabs.com \
--cc=axboe@fb.com \
--cc=igor.j.konopko@intel.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcin.dziegielewski@intel.com \
--cc=mb@lightnvm.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®