From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751126AbVLLIHe (ORCPT ); Mon, 12 Dec 2005 03:07:34 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751128AbVLLIHe (ORCPT ); Mon, 12 Dec 2005 03:07:34 -0500 Received: from [202.125.80.34] ([202.125.80.34]:12263 "EHLO mail.esn.co.in") by vger.kernel.org with ESMTP id S1751126AbVLLIHe convert rfc822-to-8bit (ORCPT ); Mon, 12 Dec 2005 03:07:34 -0500 X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Subject: RE: Errors while booting the newly built 2.6.12 kernel?? Date: Mon, 12 Dec 2005 13:28:46 +0530 Message-ID: <3AEC1E10243A314391FE9C01CD65429B1BDB03@mail.esn.co.in> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Errors while booting the newly built 2.6.12 kernel?? Thread-Index: AcX+7IM2MYpUVGbfSsKCULm9uVUwNQAAHTpw From: "Mukund JB." To: "Arjan van de Ven" Cc: Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Dear Arjun, Thanks for your quick response After I compiled the kernel, I verified the 'initrd-2.6.12.img' and it was present. But it is 10000 bytes less than the initial FC4 initrd img. I did the following steps to build the kernel: Copied the existing '.config' file from the old kernel and copied to the 2.6.12 kernel base directory. Then, # make # make modules # make modules_install # make install Is there is any thing additional needed for building the kernels in 2.6.x kernels? I verified the support for inbuilt ext3 too and its present too. What else could be the problem area? Thanks & Regards, Mukund Jampala -----Original Message----- From: Arjan van de Ven [mailto:arjan@infradead.org] Sent: Monday, December 12, 2005 12:54 PM To: Mukund JB. Cc: linux-kernel@vger.kernel.org Subject: Re: Errors while booting the newly built 2.6.12 kernel?? On Mon, 2005-12-12 at 12:44 +0530, Mukund JB. wrote: > Dear Kernel Team, > > I am facing a strange error after I compiled the Linux kernel-2.6.12(downloaded from kernel.org). > Please see the errors I get when I try to boot the newly built 2.6.12 kernel. > > I found lot of members in the groups discussing this and no definite solution is suggestion. you forgot to make an initrd.