Linux version 2.4.5-Mihai-1 (root@mr-test-1) (gcc version 2.96 20000731 (Linux-Mandrake 8.0 2.96-0.48mdk)) #4 Sun Jun 17 05:00:08 EST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000004000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 4096 bytes. On node 0 totalpages: 16384 zone(0): 4096 pages. zone(1): 12288 pages. zone(2): 0 pages. mapped APIC to ffffe000 (01111000) Kernel command line: Initializing CPU#0 Detected 451.030 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 897.84 BogoMIPS Memory: 61796k/65536k available (1239k kernel code, 3352k reserved, 467k data, 240k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: L2 Cache: 256K (32 bytes/line) CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002 CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D+ Processor stepping 01 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Disabled enhanced CPU to PCI posting #2 PCI: Using IRQ router VIA [1106/0586] at 00:07.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd v1.8 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... Winbond chip at EFER=0x3f0 key=0x87 devid=fc devrev=21 oldid=8c Winbond chip type 83877TF SMSC Super-IO detection, now testing Ports 2F0, 370 ... 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 16 0x378: readIntrThreshold is 16 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x4b 0x378: ECP settings irq=7 dma=3 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) pty: 256 Unix98 ptys configured lp0: using parport0 (polling). Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled block: queued sectors max/low 40978kB/13659kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio hda: WDC AC36400L, ATA DISK drive hdb: CD-540E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 12594960 sectors (6449 MB) w/256KiB Cache, CHS=784/255/63, UDMA(33) hdb: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) Last modified Nov 1, 2000 by Paul Gortmaker NE*000 ethercard probe at 0x340: 00 40 05 5a be 13 eth0: NE2000 found at 0x340, using IRQ 11. PPP generic driver version 2.4.1 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 28M agpgart: Detected Via MVP3 chipset agpgart: AGP aperture is 64M @ 0xd8000000 [drm] AGP 0.99 on VIA MVP3 @ 0xd8000000 64MB [drm] Initialized r128 2.1.2 20001215 on minor 63 SCSI subsystem driver Revision: 1.00 PCI: Assigned IRQ 3 for device 00:0b.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs Vendor: SEAGATE Model: ST318416N Rev: 0010 Type: Direct-Access ANSI SCSI revision: 03 Vendor: YAMAHA Model: CRW8824S Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12 Type: CD-ROM ANSI SCSI revision: 02 scsi0:0:0:0: Tagged Queuing enabled. Depth 253 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 31) SCSI device sda: 35885168 512-byte hdwr sectors (18373 MB) sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0 Detected scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0 (scsi0:A:3): 20.000MB/s transfers (20.000MHz, offset 15) sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray (scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16) sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray (scsi0:A:5): 20.000MB/s transfers (20.000MHz, offset 15) sr2: scsi-1 drive Creative EMU10K1 PCI Audio Driver, version 0.7, 04:45:36 Jun 17 2001 PCI: Found IRQ 10 for device 00:09.0 emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xd800-0xd81f, IRQ 10 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 240k freed Adding Swap: 771112k swap-space (priority -1) MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 scsi0: PCI error Interrupt at seqaddr = 0x9 scsi0: Data Parity Error Detected during address or write data phase scsi0: PCI error Interrupt at seqaddr = 0x8 scsi0: Data Parity Error Detected during address or write data phase scsi0: PCI error Interrupt at seqaddr = 0x9 scsi0: Data Parity Error Detected during address or write data phase VFS: freeing iocharset=iso8859-1 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 scsi0: PCI error Interrupt at seqaddr = 0x9 scsi0: Data Parity Error Detected during address or write data phase scsi0: PCI error Interrupt at seqaddr = 0x9 scsi0: Data Parity Error Detected during address or write data phase VFS: freeing iocharset=iso8859-1