Linux version 2.4.7 (root@lanforge-ice) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #2 Sun Jul 22 09:01:40 MST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ea400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data) BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009f800 for 4096 bytes. On node 0 totalpages: 32752 zone(0): 4096 pages. zone(1): 28656 pages. zone(2): 0 pages. mapped APIC to ffffe000 (01221000) Kernel command line: auto BOOT_IMAGE=linux-ct ro root=305 BOOT_FILE=/ct.img Initializing CPU#0 Detected 800.052 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1595.80 BogoMIPS Memory: 126384k/131008k available (1081k kernel code, 4236k reserved, 385k data, 236k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 CPU: AMD Duron(tm) Processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd83d, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Cannot allocate resource region 0 of device 00:07.5 got res[1400:14ff] for resource 0 of VIA Technologies, Inc. AC97 Audio Controller got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1420 got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1420 (#2) Found VT82C686A, not applying VIA latency patch. PCI: Disabling Via external APIC routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.4.0 initialized pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10d block: queued sectors max/low 83821kB/27940kB, 256 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHM2100AT, ATA DISK drive hdc: HITACHI DVD-ROM GD-S200, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 19640880 sectors (10056 MB) w/2048KiB Cache, CHS=1222/255/63, UDMA(66) Partition check: hda: hda1 hda2 < hda5 hda6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Assigned IRQ 9 for device 00:0a.0 PCI: Assigned IRQ 10 for device 00:0a.1 IRQ routing conflict for 00:07.5, have irq 5, want irq 10 IRQ routing conflict for 00:07.6, have irq 5, want irq 10 PCI: Sharing IRQ 10 with 00:10.0 Intel PCIC probe: not found. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Yenta IRQ list 0808, PCI irq9 Socket status: 30000020 Yenta IRQ list 0808, PCI irq10 Socket status: 30000020 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cs: cb_alloc(bus 2): vendor 0x10b7, device 0x5157 got res[2000:207f] for resource 0 of PCI device 10b7:5157 got res[10800000:1080007f] for resource 1 of PCI device 10b7:5157 got res[10800080:108000ff] for resource 2 of PCI device 10b7:5157 got res[10400000:1041ffff] for resource 6 of PCI device 10b7:5157 PCI: Enabling device 02:00.0 (0000 -> 0003) cs: cb_alloc(bus 6): vendor 0x0109, device 0x8006 PCI: device 06:00.0 has unknown header type 06, ignoring. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 236k freed Adding Swap: 265032k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.259 $ time 09:22:01 Jul 22 2001 usb-uhci.c: High bandwidth mode enabled PCI: Enabling device 00:07.2 (0010 -> 0011) PCI: Assigned IRQ 9 for device 00:07.2 PCI: Sharing IRQ 9 with 00:07.3 PCI: Sharing IRQ 9 with 00:0e.0 PCI: Setting latency timer of device 00:07.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1020, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Enabling device 00:07.3 (0010 -> 0011) PCI: Found IRQ 9 for device 00:07.3 PCI: Sharing IRQ 9 with 00:07.2 PCI: Sharing IRQ 9 with 00:0e.0 PCI: Setting latency timer of device 00:07.3 to 64 usb-uhci.c: USB UHCI at I/O 0x1040, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.251:USB Universal Host Controller Interface driver Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x00 0x378: ECP settings irq= dma= parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 ip_conntrack (1023 buckets, 8184 max) 8139too Fast Ethernet driver 0.9.18 PCI: Enabling device 00:10.0 (0000 -> 0003) PCI: Found IRQ 10 for device 00:10.0 IRQ routing conflict for 00:07.5, have irq 5, want irq 10 IRQ routing conflict for 00:07.6, have irq 5, want irq 10 PCI: Sharing IRQ 10 with 00:0a.1 PCI: Setting latency timer of device 00:10.0 to 64 eth0: RealTek RTL8139 Fast Ethernet at 0xc8852800, 08:00:46:1d:7b:d8, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000. Linux Tulip driver version 0.9.15-pre6 (July 2, 2001) 3c59x.c:LK1.1.15 6 June 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 02:00.0: 3Com PCI 3CCFE575BT Cyclone CardBus at 0x2000, PCI: Setting latency timer of device 02:00.0 to 64 00:50:da:d2:7a:21, IRQ 9 product code 5a48 rev 07.1 date 06-21-00 02:00.0: CardBus functions mapped 10800080->c885c080 8K byte-wide RAM 5:3 Rx:Tx split, MII interface. MII transceiver found at address 0, status 282d. Enabling bus-master transmits and whole-frame receives. 02:00.0: scatter/gather disabled. h/w checksums enabled eth1: using default media MII Via 686a audio driver 1.1.14b PCI: Found IRQ 10 for device 00:07.5 IRQ routing conflict for 00:07.5, have irq 5, want irq 10 IRQ routing conflict for 00:07.6, have irq 5, want irq 10 PCI: Sharing IRQ 10 with 00:0a.1 PCI: Sharing IRQ 10 with 00:10.0 via82cxxx: timeout while reading AC97 codec (0xAA0000) via82cxxx: timeout while reading AC97 codec (0xAA0000) via82cxxx: Codec rate locked at 48Khz via82cxxx: timeout while reading AC97 codec (0x800000) ac97_codec: AC97 codec, id: 0x4144:0x5348 (Analog Devices AD1881A) via82cxxx: board #1 at 0x1400, IRQ 5 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) eth1: using default media MII VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0)