From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 28 Sep 2001 08:15:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 28 Sep 2001 08:15:39 -0400 Received: from empr3-188.menta.net ([62.57.108.188]:17400 "EHLO www.bosch.es") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Fri, 28 Sep 2001 08:15:25 -0400 Message-ID: <3BB469E1.9090205@juridicas.com> Date: Fri, 28 Sep 2001 14:15:29 +0200 From: Jorge =?ISO-8859-1?Q?Ner=EDn?= Reply-To: comandante@zaralinux.com User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.2) Gecko/20010726 Netscape6/6.1 X-Accept-Language: es-es, es, en MIME-Version: 1.0 To: safemode CC: linux-kernel@vger.kernel.org, gadio@netvision.net.il Subject: Re: ide-scsi driver trouble in ac15 In-Reply-To: <20010928040722Z275827-760+17888@vger.kernel.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org safemode wrote: >I'm not entirely sure if this is ac15's fault or the preempt patch acting up. >But this is very ide-scsi centric so i'm leaning towards ac15. I burned a cd >using my ide writer and it worked fine. Then i went to burn another and the >drive went into an infinite reset loop. like this. > SCSI bus is being reset for host 0 channel 0. > scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset. > >reloading the modules does nothing but report this error. > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset. > SCSI bus is being reset for host 0 channel 0. > >Even though the modules were removed, the drive led is still blinking like it >was writing. If anyone needs some more info i'll try and get it. >the cdr did detect and work correctly at boot. > >hardware: > Promise ide controller : > PDC20262: chipset revision 1 > PDC20262: not 100% native mode: will probe irqs later > PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. > CDR: > hde: CREATIVE CD-RW RW8438E, ATAPI CD/DVD-ROM drive > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: CREATIVE Model: CD-RW RW8438E Rev: FC03 > Type: CD-ROM ANSI SCSI revision: 02 >software: > Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > linux-2.4.9-ac15-preempt-fix > It also happened to me with ac10, ide-scsi, CD-RW is a Samsung 8x, and I was writing a audio cd, when it finished writing the track 8 of 18 it entered the loop, since then I couldn't eject the cd, neither eject /dev/hdb, nor cdrecord -eject, nor the eject button, I had to reboot. My system is a 2x200mmx smp all ide. -- Jorge Nerin