Linux version 2.4.12 (root@alpha) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 mar oct 22 15:54:24 CET 2041 Booting on Noritake using machine vector Noritake-Primo from SRM Command line: root=/dev/sda1 bootdevice=scd0 bootfile=kernel-2.4.12 memcluster 0, usage 1, start 0, end 236 memcluster 1, usage 0, start 236, end 65511 memcluster 2, usage 1, start 65511, end 65536 freeing pages 236:384 freeing pages 719:65511 reserving pages 719:720 pci: cia revision 2 On node 0 totalpages: 65511 zone(0): 65511 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda1 bootdevice=scd0 bootfile=kernel-2.4.12 Using epoch = 1980 Console: colour VGA+ 80x25 Calibrating delay loop... 994.44 BogoMIPS Memory: 511288k/524088k available (1600k kernel code, 10912k reserved, 483k data, 296k init) Dentry-cache hash table entries: 65536 (order: 7, 1048576 bytes) Inode-cache hash table entries: 32768 (order: 6, 524288 bytes) Mount-cache hash table entries: 8192 (order: 4, 131072 bytes) Buffer-cache hash table entries: 32768 (order: 5, 262144 bytes) Page-cache hash table entries: 65536 (order: 6, 524288 bytes) POSIX conformance testing by UNIFIX pci: passed tb register update test pci: passed sg loopback i/o read test pci: passed tbia test pci: passed pte write cache snoop test pci: failed valid tag invalid pte reload test (mcheck; workaround available) pci: passed pci machine check test Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized pty: 256 Unix98 ptys configured block: 128 slots per queue, batch=16 eth0: DE500-BA at 0x9800 (PCI bus 0, device 11), h/w address 00:00:f8:07:f4:31, and requires IRQ18 (provided by PCI BIOS). de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com Linux Tulip driver version 0.9.15-pre7 (Oct 2, 2001) PCI: Unable to reserve I/O region #1:80@9800 for device 00:0b.0 Trying to free nonexistent resource <02277000-0227707f> SCSI subsystem driver Revision: 1.00 qlogicisp : new isp1020 revision ID (5) scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 28 irq 17 I/O base 0x9000 Vendor: DEC Model: RRD46 (C) DEC Rev: 1337 Type: CD-ROM ANSI SCSI revision: 02 ncr53c8xx: at PCI bus 0, device 13, function 0 ncr53c8xx: 53c825a detected ncr53c825a-0: rev 0x13 on pci bus 0 device 13 function 0 irq 22 ncr53c825a-0: ID 7, Fast-10, Parity Checking scsi1 : ncr53c8xx-3.4.3b-20010512 Vendor: IBM Model: XP31070W !x Rev: 81K6 Type: Direct-Access ANSI SCSI revision: 02 Vendor: IBM Model: DDRS-34560D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 Configuring GDT-PCI HA at 0/14 IRQ 24 [PCI 0/14] GDT6537RP -- HWL0 -- 32 MB EDO-RAM -- 512kB/0kB Flash-RAM [PCI 0/14] SN 11C033B4 -- RAIDYNE-FW-Version 2.22.10-R01F -- Apr 12 1999 [PCI 0/14] SCSI-C ID:0 LUN:0 -- COMPAQ ST19171WC [PCI 0/14] SCSI-C ID:1 LUN:0 -- SEAGATE ST19171W [PCI 0/14] SCSI-C ID:2 LUN:0 -- SEAGATE ST39102LC [PCI 0/14] SCSI-C ID:3 LUN:0 -- SEAGATE ST39102LC [PCI 0/14] RAID-5 Host Drive 0, Logical Drive 1: [PCI 0/14] Inconsistencies detected between cache and array drive [PCI 0/14] configuration data. Updating array drive configuration. [PCI 0/14] Press return to confirm [PCI 0/14] [PCI 0/14] RAID-5 Host Drive 0, Logical Drive 2: [PCI 0/14] Inconsistencies detected between cache and array drive [PCI 0/14] configuration data. Updating array drive configuration. [PCI 0/14] Press return to confirm [PCI 0/14] [PCI 0/14] RAID-5 host drive 0: Missing drive 0 [PCI 0/14] RAID-5 Host Drive 0 installed (idle) [PCI 0/14] Array Drive 0: n<2>CIA machine check: vector=0x670 pc=0xfffffc00004260ec code=0x98 machine check type: processor detected hard error pc = [] ra = [] ps = 0007 Not tainted v0 = 000000000000fffe t0 = 0000000000000000 t1 = fffffc01001ed42c t2 = 00000000fffa941c t3 = 000000000000000b t4 = fffffc0000242830 t5 = 0000000000000003 t6 = fffffc00001e7950 t7 = fffffc00001e4000 a0 = fffffc0000520920 a1 = fffffc0000244010 a2 = 0000000000000003 a3 = fffffffffffffffd a4 = 000000000000ffff a5 = 0000000000000054 t8 = fffffc000024400c t9 = fffffc000024317a t10= 0000000000000028 t11= fffffc0000244005 pv = fffffc000049a6c0 at = 0000000000000000 gp = fffffc000056b910 sp = fffffc00001e78e0  scsi2 : GDT6537RP Vendor: ICP Model: Host Drive #00 Rev: Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi1, channel 0, id 6, lun 0 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 ncr53c825a-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sda: 2199878 512-byte hdwr sectors (1126 MB) Partition check: sda: sda1 sda2 ncr53c825a-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sdb: 8925000 512-byte hdwr sectors (4570 MB) sdb: sdb1 SCSI device sdc: 35535780 512-byte hdwr sectors (18194 MB) sdc: sdc1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack (2047 buckets, 16376 max) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 296k freed CIA machine check: vector=0x670 pc=0xfffffc00003120ec code=0x98 machine check type: processor detected hard error pc = [] ra = [] ps = 0000 Not tainted v0 = 0000000000000000 t0 = ffffffffffffffff t1 = 0000000000000000 t2 = 0000000000000001 t3 = fffffc0000532c40 t4 = fffffc0000532c40 t5 = fffffffffffffc18 t6 = fffffc0000570848 t7 = fffffc00004f4000 a0 = 0000000000000019 a1 = 0000000000000032 a2 = 0000000000000002 a3 = 0000000000000002 a4 = fffffc00004f8640 a5 = fffffc0000532c40 t8 = 0000000000000000 t9 = 00000000aed6b1ff t10= 0000000000000000 t11= fffffc0000de2238 pv = fffffc000031cee0 at = fffffc00004f4000 gp = fffffc000056b910 sp = fffffc00004f7fc0 CIA machine check: vector=0x670 pc=0xfffffc00003120e8 code=0x98 machine check type: processor detected hard error pc = [] ra = [] ps = 0000 Not tainted v0 = 0000000000000000 t0 = ffffffffffffffff t1 = 0000000000000000 t2 = 0000000000000001 t3 = fffffc0000532c40 t4 = fffffc0000532c40 t5 = fffffffffffffc18 t6 = fffffc0000570848 t7 = fffffc00004f4000 a0 = 0000000000000019 a1 = 0000000000000032 a2 = 0000000000000002 a3 = 0000000000000002 a4 = fffffc00004f8640 a5 = fffffc0000532c40 t8 = 0000000000000000 t9 = 00000000c6193945 t10= 0000000000000000 t11= fffffc001fbc3c00 pv = fffffc000031cee0 at = fffffc00004f4000 gp = fffffc000056b910 sp = fffffc00004f7fc0 CIA machine check: vector=0x670 pc=0xfffffc0000499f88 code=0x98 machine check type: processor detected hard error pc = [] ra = [] ps = 0000 Not tainted v0 = fffffc001f9ec000 t0 = 0000000000001fe8 t1 = 0000000000000000 t2 = 000000000000016f t3 = 0000000000000000 t4 = fffffc001f9ed468 t5 = fffffc001f9edfed t6 = fffffc001fdb6000 t7 = fffffc001fab0000 a0 = fffffc001f9ec000 a1 = 0000000000000000 a2 = 0000000000000005 a3 = 0000000000001840 a4 = fffffc00004f8640 a5 = fffffc0000532c40 t8 = 0000000000000000 t9 = fffffc001fab3d98 t10= 9800000000000000 t11= fffffc0000de2038 pv = fffffc0000499f20 at = fffffc0000339d70 gp = fffffc000056b910 sp = fffffc001fab3c58 Adding Swap: 65080k swap-space (priority -1)