Linux version 2.4.16 (root@matrix) (gcc version 2.95.3 20010315 (release)) #8 Sat Jan 19 08:03:53 EET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=301 Initializing CPU#0 Detected 367.508 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 734.00 BogoMIPS Memory: 255816k/262144k available (1105k kernel code, 5944k reserved, 298k data, 208k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 05 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Found IRQ 10 for device 00:07.2 PCI: Sharing IRQ 10 with 00:11.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd Journalled Block Device driver loaded Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 PCI: Found IRQ 11 for device 00:13.0 PCI: Sharing IRQ 11 with 00:13.1 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xe000-0xe007, BIOS settings: hde:DMA, hdf:DMA HPT366: IDE controller on PCI bus 00 dev 99 PCI: Found IRQ 11 for device 00:13.1 PCI: Sharing IRQ 11 with 00:13.0 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xec00-0xec07, BIOS settings: hdg:DMA, hdh:pio hda: Maxtor 2B010H1, ATA DISK drive hde: Maxtor 4W060H4, ATA DISK drive hdf: Maxtor 4W060H4, ATA DISK drive hdg: Maxtor 4W060H4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide2 at 0xd800-0xd807,0xdc02 on irq 11 ide3 at 0xe400-0xe407,0xe802 on irq 11 hda: 19541088 sectors (10005 MB) w/2048KiB Cache, CHS=1216/255/63, UDMA(33) hde: 120033900 sectors (61457 MB) w/2048KiB Cache, CHS=119081/16/63, UDMA(66) hdf: 120033900 sectors (61457 MB) w/2048KiB Cache, CHS=119081/16/63, UDMA(66) hdg: 120033900 sectors (61457 MB) w/2048KiB Cache, CHS=119081/16/63, UDMA(66) Partition check: hda: hda1 hda2 hda3 hda4 hde: hde1 hdf: hdf1 hdg: [PTBL] [7471/255/63] hdg1 dmfe: Davicom DM9xxx net driver, version 1.36.3 (2001-11-06) PCI: Found IRQ 10 for device 00:11.0 PCI: Sharing IRQ 10 with 00:07.2 eth0: Davicom DM9102 at pci00:11.0, 00:80:ad:00:69:5d, irq 10. md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 635.600 MB/sec 32regs : 451.200 MB/sec pII_mmx : 825.600 MB/sec p5_mmx : 867.200 MB/sec raid5: using function: p5_mmx (867.200 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. [events: 00000001] [events: 00000001] [events: 00000001] md: autorun ... md: considering hdg1 ... md: adding hdg1 ... md: adding hdf1 ... md: adding hde1 ... md: created md0 md: bind md: bind md: bind md: running: md: hdg1's event counter: 00000001 md: hdf1's event counter: 00000001 md: hde1's event counter: 00000001 md: md0: raid array is not clean -- starting background reconstruction md0: max total readahead window set to 496k md0: 2 data-disks, max readahead per data-disk: 248k raid5: device hdg1 operational as raid disk 2 raid5: device hdf1 operational as raid disk 1 raid5: device hde1 operational as raid disk 0 raid5: allocated 3291kB for md0 raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2 raid5: raid set md0 not clean; reconstructing parity RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdf1 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdg1 RAID5 conf printout: --- rd:3 wd:3 fd:0 disk 0, s:0, o:1, n:0 rd:0 us:1 dev:hde1 disk 1, s:0, o:1, n:1 rd:1 us:1 dev:hdf1 disk 2, s:0, o:1, n:2 rd:2 us:1 dev:hdg1 md: updating md0 RAID superblock on device md: hdg1 [events: 00000002]<6>(write) hdg1's sb offset: 60010688 md: syncing RAID array md0 md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc. md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction. md: using 124k window, over a total of 60010688 blocks. md: hdf1 [events: 00000002]<6>(write) hdf1's sb offset: 60016704 md: hde1 [events: 00000002]<6>(write) hde1's sb offset: 60016704 md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack (2048 buckets, 16384 max) ip_tables: (c)2000 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 208k freed Adding Swap: 891596k swap-space (priority -1) EXT3 FS 2.4-0.9.15, 06 Nov 2001 on ide0(3,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.15, 06 Nov 2001 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.15, 06 Nov 2001 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode.