Linux version 2.4.17 (root@kingdom.e) (gcc version 2.95.4 20011006 (Debian prerelease)) #1 Sat Dec 22 12:17:05 CET 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fec000 (usable) BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data) BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved) BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 98284 zone(0): 4096 pages. zone(1): 94188 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: BOOT_IMAGE=VMLinuz4kb ro root=345 bootfs=ext3 mem=nopentium Initializing CPU#0 Detected 750.037 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 1497.49 BogoMIPS Memory: 383608k/393136k available (1531k kernel code, 9140k reserved, 583k data, 220k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0183fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 750.0320 MHz. ..... host bus clock speed is 200.0084 MHz. cpu: 0, clocks: 2000084, slice: 1000042 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1010, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:04.0 PCI: Disabling Via external APIC routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: Printer, EPSON Stylus COLOR 850 parport_pc: Via 686A parallel port: io=0x378 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (polling). lp0: console ready Real Time Clock Driver v1.10e Non-volatile memory driver v1.1 ppdev: user-space parallel port driver block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 21) IDE UDMA66 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DPTA-372050, ATA DISK drive hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive hdc: _NEC DV-5700A, ATAPI CD/DVD-ROM drive hdd: CR-4801TE, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=2495/255/63, UDMA(66) hdb: 40132503 sectors (20548 MB) w/1900KiB Cache, CHS=2498/255/63, UDMA(66) Partition check: hda: hda1 hda2 < hda5 > hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 > hdb2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: _NEC Model: DV-5700A Rev: 1.91 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MITSUMI Model: CR-4801TE Rev: 2.03 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 8x/8x writer cd/rw xa/form2 cdda tray NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 220k freed Adding Swap: 160608k swap-space (priority -1) EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,69), internal journal PCI: Found IRQ 9 for device 00:0d.0 PCI: Sharing IRQ 9 with 00:04.2 PCI: Sharing IRQ 9 with 00:04.3 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0d.0: 3Com PCI 3c900 Cyclone 10Mbps Combo at 0x9800. Vers LK1.1.16 Creative EMU10K1 PCI Audio Driver, version 0.16, 12:25:52 Dec 22 2001 PCI: Found IRQ 10 for device 00:0b.0 emu10k1: EMU10K1 rev 6 model 0x8027 found, IO at 0xa400-0xa41f, IRQ 10 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,66), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. lp0: compatibility mode lp0: compatibility mode lp0: compatibility mode VFS: Disk change detected on device sr(11,0) spurious 8259A interrupt: IRQ7. ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root VFS: Disk change detected on device sr(11,0) ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root Unable to handle kernel paging request at virtual address 65726198 printing eip: c014429c *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[] Not tainted EFLAGS: 00010a83 eax: c017f790 ebx: 65726170 ecx: 0000000f edx: d7f80000 esi: 65726170 edi: c017f790 ebp: 0003630b esp: ce25bddc ds: 0018 es: 0018 ss: 0018 Process ls (pid: 6049, stackpage=ce25b000) Stack: 00000000 d7fbe9f0 0003630b d3a4e400 c01446b0 d3a4e400 0003630b d7fbe9f0 c017f790 ce25be38 00000000 ce25be78 ce25be38 ce25bee4 c017f915 d3a4e400 0003630b c017f790 ce25be38 ce25be78 d3a4e400 ce25bee4 ce25be78 ce25bee4 Call Trace: [] [] [] [] [] [] [] [] [] [] [] [] [] Code: 39 6e 28 75 ef 8b 44 24 14 39 86 98 00 00 00 75 e3 85 ff 74 <7>VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) sr0: CDROM not ready. Make sure there is a disc in the drive.