From: ken <koehlekr@ucrwcu.rwc.uc.edu>
To: t.sailer@alumni.ethz.ch, linux-kernel@vger.kernel.org
Subject: es1371 2.2.15 OK - 2.4.17 noisy on mic input
Date: Mon, 28 Jan 2002 11:41:58 -0500 [thread overview]
Message-ID: <3C557F56.F0415D0@ucrwcu.rwc.uc.edu> (raw)
Hi All,
I have a Creative Sound Blaster 16 PCI on an FIC-V503+ MB (bios rev.
JE439)
which I use in part for dictation (with viavoice). When I boot a stock
2.2.15 kernel (on a RedHat 6.2 system), it works great. When I boot a
stock 2.4.17 kernel (on a RedHat 7.2 system) the input volume is way
down and noise accompanies all spoken input, rendering it useless for
dictation.
Any ideas? Thanks in advance,
Ken
Documentation follows:
from system log during boot:::::::::::::::::::::::::::::::::::::::::::
Jan 28 11:14:44 ken kernel: CPU: AMD-K6(tm) 3D processor stepping 0c
...
Jan 28 11:14:44 ken kernel: PCI: PCI BIOS revision 2.10 entry at
0xfb360, last bus=2
Jan 28 11:14:44 ken kernel: PCI: Using configuration type 1
Jan 28 11:14:44 ken kernel: PCI: Probing PCI hardware
Jan 28 11:14:44 ken kernel: PCI: 00:07.3: class 604 doesn't match header
type 00. Ignoring class.
Jan 28 11:14:44 ken kernel: Unknown bridge resource 1: assuming
transparent
Jan 28 11:14:44 ken kernel: Unknown bridge resource 2: assuming
transparent
Jan 28 11:14:44 ken kernel: PCI: Using IRQ router VIA [1106/0586] at
00:07.0
...
Jan 28 11:14:44 ken kernel: es1371: version v0.30 time 11:00:52 Jan 28
2002
Jan 28 11:14:44 ken kernel: PCI: Assigned IRQ 10 for device 00:08.0
Jan 28 11:14:44 ken kernel: es1371: found chip, vendor id 0x1274 device
id 0x5880 revision 0x02
Jan 28 11:14:44 ken kernel: es1371: found es1371 rev 2 at io 0xe800 irq
10
Jan 28 11:14:44 ken kernel: es1371: features: joystick 0x0
Jan 28 11:14:44 ken kernel: ac97_codec: AC97 codec, id: 0x5452:0x4123
(TriTech TR A5)
output of cat /proc/pci::::::::::::::::::::::::::::::::::::::::::::::
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3] (rev 4).
Master Capable. Latency=16.
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (rev 0).
Master Capable. No bursts. Min Gnt=4.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo
VP] (rev 71).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
Master Capable. Latency=64.
I/O at 0xe400 [0xe40f].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 2).
IRQ 9.
Master Capable. Latency=64.
I/O at 0xe000 [0xe01f].
Bus 0, device 7, function 3:
PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16).
IRQ 9.
Bus 0, device 8, function 0:
Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 2).
IRQ 10.
Master Capable. Latency=64. Min Gnt=12.Max Lat=128.
I/O at 0xe800 [0xe83f].
Bus 0, device 9, function 0:
Ethernet controller: 3Com Corporation 3c595 100BaseTX [Vortex] (rev
0).
IRQ 11.
Master Capable. Latency=248. Min Gnt=3.Max Lat=8.
I/O at 0xec00 [0xec1f].
Bus 0, device 10, function 0:
VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 6).
IRQ 9.
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xe4000000 [0xe7ffffff].
output of cat /proc/es1371:::::::::::::::::::::::::::::::::::::::::::
Creative ES137x Debug Dump-o-matic
AC97 CODEC state
reg:0x00 val:0x0000
reg:0x02 val:0x0b0b
reg:0x04 val:0x0000
reg:0x06 val:0x000b
reg:0x08 val:0x0000
reg:0x0a val:0x000a
reg:0x0c val:0x000b
reg:0x0e val:0x000b
reg:0x10 val:0x0b0b
reg:0x12 val:0x0b0b
reg:0x14 val:0x0b0b
reg:0x16 val:0x0b0b
reg:0x18 val:0x0b0b
reg:0x1a val:0x0000
reg:0x1c val:0x0a0a
reg:0x1e val:0x0000
reg:0x20 val:0x0000
reg:0x22 val:0x0000
reg:0x24 val:0x0000
reg:0x26 val:0x000f
reg:0x28 val:0x0000
reg:0x2a val:0x0000
reg:0x2c val:0x0000
reg:0x2e val:0x0000
reg:0x30 val:0x0000
reg:0x32 val:0x0000
reg:0x34 val:0x0000
reg:0x36 val:0x0000
reg:0x38 val:0x0000
reg:0x3a val:0x0000
reg:0x3c val:0x0000
reg:0x3e val:0x0000
reg:0x40 val:0x0000
reg:0x42 val:0x0000
reg:0x44 val:0x0000
reg:0x46 val:0x0000
reg:0x48 val:0x0000
reg:0x4a val:0x0000
reg:0x4c val:0x0000
reg:0x4e val:0x0000
reg:0x50 val:0x0000
reg:0x52 val:0x0000
reg:0x54 val:0x0000
reg:0x56 val:0x0000
reg:0x58 val:0x0000
reg:0x5a val:0x0000
reg:0x5c val:0x0000
reg:0x5e val:0x0000
reg:0x60 val:0x0000
reg:0x62 val:0x0000
reg:0x64 val:0x0000
reg:0x66 val:0x0000
reg:0x68 val:0x0000
reg:0x6a val:0x0000
reg:0x6c val:0x0000
reg:0x6e val:0x0000
reg:0x70 val:0x0000
reg:0x72 val:0x0000
reg:0x74 val:0x0000
reg:0x76 val:0x0000
reg:0x78 val:0x0000
reg:0x7a val:0x0000
reg:0x7c val:0x5452
reg:0x7e val:0x4123
reply other threads:[~2002-01-28 16:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3C557F56.F0415D0@ucrwcu.rwc.uc.edu \
--to=koehlekr@ucrwcu.rwc.uc.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=t.sailer@alumni.ethz.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®