diff -Naur Affix-1_00pre2/Configure affix/Configure --- Affix-1_00pre2/Configure Sat Jun 1 03:07:45 2002 +++ affix/Configure Mon Jun 3 13:48:41 2002 @@ -19,7 +19,7 @@ # 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # -# $Id: Configure,v 2.48 2002/06/01 00:07:45 kds Exp $ +# $Id: Configure,v 2.50 2002/06/03 10:48:41 kds Exp $ # # Configuration script (adopted from PCMCIA package) # @@ -403,19 +403,12 @@ if [ "$CONFIG_MODVERSIONS" = "y" ] ; then - if [ $CONF_SRC != 1 ] ; then MODVER="$LINUX/include/linux/$MODVER" if [ ! -r "$MODVER" ] ; then echo "$MODVER does not exist!" echo " To fix, run 'make dep' in $LINUX." fail fi - else - # use running kernel - mv $MODVER include/affix - ln -sf ../../../include/affix/$MODVER ./kernel/include/linux/$MODVER - MODVER="$BTDIR/kernel/include/linux/$MODVER" - fi else rm -f $MODVER fi @@ -474,6 +467,34 @@ CPPFLAGS_KERNEL="$CPPFLAGS_KERNEL -D__KERNEL__ -DMODULE $MFLAG" LDFLAGS="${CROSS_LDFLAGS:-}" +#======================================================================= + +# How should the startup scripts be configured? + +if [ "$PREFIX" = "" ] ; then + if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then + echo "It looks like you have a System V init file setup." + SYSV_INIT=y + if [ -d /sbin/init.d ] ; then + RC_DIR=/sbin/init.d + elif [ -d /etc/rc.d/init.d ] ; then + RC_DIR=/etc/rc.d + else + RC_DIR=/etc + fi + else + echo "It looks like you have a BSD-ish init file setup." + SYSV_INIT= + fi +else + ask_bool "System V init script layout" SYSV_INIT + if [ "$SYSV_INIT" = "y" ] ; then + ask_str "Top-level directory for RC scripts" RC_DIR + fi +fi + +echo "" + #======================================================================= @@ -503,42 +524,12 @@ write_str_ne $x done for x in CROSS_COMPILE CROSS_CPPFLAGS CROSS_LDFLAGS \ - BTDIR LINUX PREFIX PROGDIR LIBDIR RCDIR ARCH HOST_ARCH \ + BTDIR LINUX PREFIX PROGDIR MODDIR LIBDIR RCDIR ARCH HOST_ARCH SYSV_INIT RC_DIR \ CPPFLAGS_KERNEL CPPFLAGS CFLAGS LDFLAGS CPPFLAGS_GLIB LDFLAGS_GLIB \ CPPFLAGS_OBEX LDFLAGS_OBEX; do write_str_cfg $x done write_nl - -#======================================================================= - -# How should the startup scripts be configured? - -if [ "$PREFIX" = "" ] ; then - if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then - echo "It looks like you have a System V init file setup." - SYSV_INIT=y - if [ -d /sbin/init.d ] ; then - RC_DIR=/sbin/init.d - elif [ -d /etc/rc.d/init.d ] ; then - RC_DIR=/etc/rc.d - else - RC_DIR=/etc - fi - else - echo "It looks like you have a BSD-ish init file setup." - SYSV_INIT= - fi - write_bool SYSV_INIT - if [ "$SYSV_INIT" = "y" ] ; then write_str_cfg RC_DIR ; fi -else - ask_bool "System V init script layout" SYSV_INIT - if [ "$SYSV_INIT" = "y" ] ; then - ask_str "Top-level directory for RC scripts" RC_DIR - fi -fi - -echo "" #======================================================================= diff -Naur Affix-1_00pre2/README affix/README --- Affix-1_00pre2/README Sat Jun 1 04:07:57 2002 +++ affix/README Mon Jun 3 15:17:57 2002 @@ -213,7 +213,11 @@ 6) Update system configuration. - For PCMCIA Bluetooth devices: - For Nokia Connectivity Card the following lines should added to + Affix installer copies configuration files from etc/pcmcia to + /etc/pcmcia for all supported PCMCIA devices. Check if your PCMCIA + configuration read those files automaticaly. + Otherwise you need add some configuration options manually, e.g. + for Nokia DTL-1/DTL-4 the following lines should added to the /etc/pcmcia/config file: a) to the device driver definitions device "affix_uart_cs" @@ -222,6 +226,8 @@ card "Nokia Mobile Phones DTL-1" manfid 0x0124, 0x1000 bind "affix_uart_cs" + + ->> Please check etc/pcmcia of all available options. - For USB Bluetooth devices: Install the hot-plug package if automatic loading of the "affix_usb.o" diff -Naur Affix-1_00pre2/etc/Makefile affix/etc/Makefile --- Affix-1_00pre2/etc/Makefile Fri May 31 01:44:35 2002 +++ affix/etc/Makefile Mon Jun 3 13:34:36 2002 @@ -18,7 +18,7 @@ # 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # -# $Id: Makefile,v 1.25 2002/05/30 22:44:35 kds Exp $ +# $Id: Makefile,v 1.26 2002/06/03 10:34:36 kds Exp $ # # Makefile for installing scripts # @@ -50,7 +50,7 @@ install -m 0755 -d $(PREFIX)/etc/ppp/ip-down.d install -m 0555 ./affix/masq-down $(PREFIX)/etc/ppp/ip-down.d - if [ -d /etc/modutils ] ; then \ + @if [ -d /etc/modutils ] ; then \ install -m 0644 ./modutils /etc/modutils/affix; \ update-modules; \ fi diff -Naur Affix-1_00pre2/kernel/Makefile affix/kernel/Makefile --- Affix-1_00pre2/kernel/Makefile Fri May 31 18:23:29 2002 +++ affix/kernel/Makefile Mon Jun 3 14:57:38 2002 @@ -18,7 +18,7 @@ # 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # -# $Id: Makefile,v 2.32 2002/05/31 15:23:29 kds Exp $ +# $Id: Makefile,v 2.33 2002/06/03 11:57:38 kds Exp $ # # Makefile for compiling core module of the bluetooth stack # @@ -73,7 +73,7 @@ DMODULE = affix.o all: subdirs $(MODULE) - echo $(DIRS) +# echo $(DIRS) subdirs: @set -e; for d in $(DIRS); do $(MAKE) -C $$d all; done diff -Naur Affix-1_00pre2/kernel/btcore/hci_mgr.c affix/kernel/btcore/hci_mgr.c --- Affix-1_00pre2/kernel/btcore/hci_mgr.c Fri May 31 18:23:29 2002 +++ affix/kernel/btcore/hci_mgr.c Mon Jun 3 14:57:38 2002 @@ -19,7 +19,7 @@ */ /* - $Id: hci_mgr.c,v 2.58 2002/05/31 15:23:29 kds Exp $ + $Id: hci_mgr.c,v 2.59 2002/06/03 11:57:38 kds Exp $ HCI Manager @@ -600,7 +600,6 @@ btl_head_init(&btdevs); #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 7) - down(&exit_sema); /* start thread here */ pid = kernel_thread(mgr_thread, NULL, 0); #else @@ -627,9 +626,6 @@ { DBFENTER; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 4, 7) - down(&exit_sema); -#endif if( pid != -1 ) { kill_proc(pid, SIGTERM, 1); down(&exit_sema); diff -Naur Affix-1_00pre2/kernel/include/affix/bluez.h affix/kernel/include/affix/bluez.h --- Affix-1_00pre2/kernel/include/affix/bluez.h Fri May 31 18:23:29 2002 +++ affix/kernel/include/affix/bluez.h Mon Jun 3 15:17:57 2002 @@ -173,6 +173,8 @@ return 0; netif_stop_queue(hdev->dev); + tasklet_kill(&hdev->tx_task); + skb_queue_purge(&hdev->txq); err = hdev->close(hdev); return err;