From: Alessandro Suardi <alessandro.suardi@oracle.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: 2.5.25 dead kbd and gpm oops (my config error ?)
Date: Sat, 06 Jul 2002 13:39:49 +0200 [thread overview]
Message-ID: <3D26D705.9000808@oracle.com> (raw)
2.5.25 compiles and boots fine, but keyboard is dead and
gpm exits with its own oops() function (not a kernel oops).
Jul 6 13:08:33 dolphin kernel: PCI: Probing PCI hardware
Jul 6 13:08:33 dolphin kernel: PCI: Probing PCI hardware (bus 00)
Jul 6 13:08:33 dolphin kernel: Unknown bridge resource 2: assuming transparent
Jul 6 13:08:33 dolphin kernel: PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Jul 6 13:08:33 dolphin kernel: __iounmap: bad address d0802400
Jul 6 13:08:33 dolphin kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
[...]
Jul 6 13:08:34 dolphin kernel: PCI: Found IRQ 11 for device 00:03.0
Jul 6 13:08:34 dolphin kernel: PCI: Sharing IRQ 11 with 00:03.1
Jul 6 13:08:34 dolphin kernel: PCI: Sharing IRQ 11 with 00:07.2
Jul 6 13:08:34 dolphin kernel: PCI: Found IRQ 11 for device 00:03.1
Jul 6 13:08:34 dolphin kernel: PCI: Sharing IRQ 11 with 00:03.0
Jul 6 13:08:34 dolphin kernel: PCI: Sharing IRQ 11 with 00:07.2
Jul 6 13:08:34 dolphin kernel: mice: PS/2 mouse device common for all mice
Jul 6 13:08:34 dolphin kernel: i8042.c: Can't get irq 1 for KBD
Jul 6 13:08:34 dolphin kernel: i8042.c: Can't get irq 1 for KBD
Jul 6 13:08:34 dolphin kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 6 13:08:34 dolphin kernel: Yenta IRQ list 06d8, PCI irq11
Jul 6 13:08:34 dolphin keytable: Loading keymap: succeeded
Jul 6 13:08:34 dolphin kernel: Socket status: 30000020
Jul 6 13:08:34 dolphin kernel: Yenta IRQ list 06d8, PCI irq11
Jul 6 13:08:34 dolphin kernel: Socket status: 30000006
Jul 6 13:08:34 dolphin kernel: input.c: hotplug returned -2
Jul 6 13:08:34 dolphin kernel: input: PS/2 Generic Mouse on isa0060/serio1
Jul 6 13:08:34 dolphin kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 6 13:08:34 dolphin kernel: Advanced Linux Sound Architecture Driver Version 0.9.0rc2 (Wed Jun 19 08:56:25 2002 UTC).
[...]
Jul 6 13:08:44 dolphin sendmail: sendmail startup succeeded
Jul 6 13:08:44 dolphin gpm: gpm startup succeeded
Jul 6 13:08:44 dolphin gpm[778]: oops() invoked from gpm.c(978)
Jul 6 13:08:44 dolphin gpm[778]: /dev/mouse: Device or resource busy
Jul 6 13:08:45 dolphin crond: crond startup succeeded
So, there is the __iounmap message I've never seen, then the irq1
problem from i8042.c, the hotplug message from input.c and the
gpm oops(). This latter perhaps I should point to /dev/input/mouse
(/dev/mouse is a softlink to /dev/psaux) ?
From .config:
[asuardi@dolphin linux]$ egrep 'INPUT|MOUSE|SERIO|8042' .config | grep -v '^#'
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_I8042_REG_BASE=60
CONFIG_I8042_KBD_IRQ=1
CONFIG_I8042_AUX_IRQ=12
CONFIG_SERIO_SERPORT=m
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
Box is a Dell Latitude laptop.
Thanks in advance for any "input" ;)
--alessandro
"my actions make me beautiful / and dignify the flesh"
(R.E.M., "Falls to Climb")
next reply other threads:[~2002-07-06 11:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-06 11:39 Alessandro Suardi [this message]
2002-07-06 16:36 ` Kai Makisara
2002-07-06 18:02 ` James Simmons
2002-07-06 17:53 ` James Simmons
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D26D705.9000808@oracle.com \
--to=alessandro.suardi@oracle.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®