--- linux/drivers/i2c/Config.help.orig	2002-07-07 16:41:47.000000000 -0400
+++ linux/drivers/i2c/Config.help	2002-07-07 16:45:21.000000000 -0400
@@ -1,3 +1,4 @@
+I2C support
 CONFIG_I2C
   I2C (pronounce: I-square-C) is a slow serial bus protocol used in
   many micro controller applications and developed by Philips.  SMBus,
@@ -21,6 +22,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-core.o.
 
+I2C bit-banging interfaces
 CONFIG_I2C_ALGOBIT
   This allows you to use a range of I2C adapters called bit-banging
   adapters.  Say Y if you own an I2C adapter belonging to this class
@@ -31,6 +33,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-algo-bit.o.
 
+Philips style parallel port adapter
 CONFIG_I2C_PHILIPSPAR
   This supports parallel-port I2C adapters made by Philips.  Say Y if
   you own such an adapter.
@@ -43,6 +46,7 @@
   Note that if you want support for different parallel port devices,
   life will be much easier if you compile them all as modules.
 
+ELV adapter
 CONFIG_I2C_ELV
   This supports parallel-port I2C adapters called ELV.  Say Y if you
   own such an adapter.
@@ -52,6 +56,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-elv.o.
 
+Velleman K9000 adapter
 CONFIG_I2C_VELLEMAN
   This supports the Velleman K9000 parallel-port I2C adapter.  Say Y
   if you own such an adapter.
@@ -61,6 +66,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-velleman.o.
 
+I2C PCF 8584 interfaces
 CONFIG_I2C_ALGOPCF
   This allows you to use a range of I2C adapters called PCF adapters.
   Say Y if you own an I2C adapter belonging to this class and then say
@@ -71,6 +77,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-algo-pcf.o.
 
+Elektor ISA card
 CONFIG_I2C_ELEKTOR
   This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
   such an adapter.
@@ -80,6 +87,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-elektor.o.
 
+I2C device interface
 CONFIG_I2C_CHARDEV
   Say Y here to use i2c-* device files, usually found in the /dev
   directory on your system.  They make it possible to have user-space
@@ -91,6 +99,7 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-dev.o.
 
+I2C /proc interface (required for hardware sensors)
 CONFIG_I2C_PROC
   This provides support for i2c device entries in the /proc filesystem.
   The entries will be found in /proc/sys/dev/sensors.