Linux version 2.4.18 (root@sonne.weltall) (gcc version 2.95.4 20011006 (Debian prerelease)) #7 Sat Aug 31 12:18:39 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000a0000 - 000000001fff0000 (reserved) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) found SMP MP-table at 000f5c40 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 131072 zone(0): 4096 pages. zone(1): 126976 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Unknown CPU [15:2] APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: lang= devfs=nomount ramdisk_size=8192 mem=512M BOOT_IMAGE=vmlinuz auto Initializing CPU#0 Detected 1630.971 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3224.37 BogoMIPS Memory: 513484k/524288k available (1302k kernel code, 10416k reserved, 431k data, 216k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-12, 2-20, 2-21 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 001 01 0 0 0 0 0 1 1 71 0e 001 01 0 0 0 0 0 1 1 79 0f 001 01 0 0 0 0 0 1 1 81 10 001 01 1 1 0 1 0 1 1 89 11 001 01 1 1 0 1 0 1 1 91 12 001 01 1 1 0 1 0 1 1 99 13 001 01 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 001 01 1 1 0 1 0 1 1 A9 17 001 01 1 1 0 1 0 1 1 B1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1615.0357 MHz. ..... host bus clock speed is 100.9395 MHz. cpu: 0, clocks: 1009395, slice: 504697 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb0c0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 16 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I7,P0) -> 22 PCI->APIC IRQ transform: (B2,I9,P0) -> 18 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd NTFS driver v1.1.22 [Flags: R/O] ACPI: APM is already active, exiting parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (polling). Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24cb PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: chipset revision 1 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) hda: MAXTOR 6L060J3, ATA DISK drive hdc: CD-RW CDR-5S40, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63 hdc: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.97.sv hdd: No disk in drive hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) PPP generic driver version 2.4.1 PPP Deflate Compression module registered 8139too Fast Ethernet driver 0.9.24 eth0: RealTek RTL8139 Fast Ethernet at 0xe0800000, 00:50:70:f1:03:48, IRQ 22 eth0: Identified 8139 chip type 'RTL-8139C' Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 440M agpgart: Detected Intel i845 chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] AGP 0.99 on Intel i845 @ 0xe0000000 64MB [drm] Initialized mga 3.0.2 20010321 on minor 0 ide-floppy driver 0.97.sv usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 uhci.c: USB UHCI at I/O 0xd800, IRQ 16 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0xd000, IRQ 19 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 uhci.c: USB UHCI at I/O 0xd400, IRQ 18 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers usb.c: registered new driver acm acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 216k freed hub.c: USB new device connect on bus1/1, assigned device number 2 Adding Swap: 136512k swap-space (priority -1) attempt to access beyond end of device 03:02: rw=0, want=2, limit=1 EXT2-fs: unable to read superblock EXT2-fs warning: maximal mount count reached, running e2fsck is recommended FAT: Did not find valid FSINFO signature. Found signature1 0x4e0005 signature2 0xc00b6600 sector=1. VFS: Can't find a valid FAT filesystem on dev 03:01. ide-floppy: hdd: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 hdd: No disk in drive eth0: Setting half-duplex based on auto-negotiated partner ability 0000. ttyACM0: USB ACM device hub.c: USB new device connect on bus2/1, assigned device number 2 hub.c: USB hub found hub.c: 5 ports detected hub.c: USB new device connect on bus2/1/2, assigned device number 3 input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb2:3.0 hub.c: USB new device connect on bus2/1/4, assigned device number 4 input1: USB HID v1.00 Keyboard [046a:0001] on usb2:4.0