R Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 001 01 1 1 0 0 0 1 1 71 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9-> 0:20 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 400.0846 MHz. ..... host bus clock speed is 100.0211 MHz. cpu: 0, clocks: 100211, slice: 3036 CPU0 checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 cpu: 1, clocks: 100211, slice: 3036 CPU1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 bad: scheduling while atomic! e7fcbef8 c011917d c03493a0 00000000 00000000 00000000 00000000 00000000 e7fca000 e7fcbf94 e7fcbf98 e7fcbf78 c0119a69 00000000 e7fce060 c0119660 00000000 00000000 c01183f1 e7fcbf58 c042d4a0 00000001 e7fce060 c0119660 Call Trace: []schedule+0x3d/0x4d0 []wait_for_completion+0x129/0x1e0 []default_wake_function+0x0/0x40 []try_to_wake_up+0x331/0x340 []default_wake_function+0x0/0x40 []set_cpus_allowed+0x22e/0x250 []migration_thread+0x50/0x5b0 []migration_thread+0x0/0x5b0 []migration_thread+0x0/0x5b0 []kernel_thread_helper+0x5/0xc bad: scheduling while atomic! e7fc9f10 c011917d c03493a0 00000000 e7fc8000 c0125310 c0440e80 c04259a4 e7fc8000 e7fc9fac e7fc9fb0 e7fc9f90 c0119a69 00000000 e7fce780 c0119660 00000000 00000000 c01183f1 e7fc9f70 c042d4a0 00000001 e7fce780 c0119660 Call Trace: []schedule+0x3d/0x4d0 []tasklet_hi_action+0x80/0xd0 []wait_for_completion+0x129/0x1e0 []default_wake_function+0x0/0x40 []try_to_wake_up+0x331/0x340 []default_wake_function+0x0/0x40 []set_cpus_allowed+0x22e/0x250 []ksoftirqd+0x5b/0x110 []ksoftirqd+0x0/0x110 []kernel_thread_helper+0x5/0xc CPUS done 4294967295 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xf0730, last bus=1 PCI: Using configuration type 1 adding '' to cpu class interfaces adding '' to cpu class interfaces ACPI: Subsystem revision 20020918 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PnPBIOS: Found PnP BIOS installation structure at 0xc00fd2c0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd2f0, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver PnPBIOS: PNP0c02: ioport range 0x290-0x297 has been reserved PnPBIOS: PNP0c02: ioport range 0xe400-0xe43f has been reserved PnPBIOS: PNP0c02: ioport range 0xe800-0xe83f could not be reserved usb.c: registered new driver usbfs usb.c: registered new driver hub IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16) 00:00:0c[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) 00:00:0c[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18) 00:00:0c[C] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) 00:00:0c[D] -> 2-19 -> IRQ 19 Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Starting kswapd BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded Capability LSM initialized Limiting direct PCI/PCI transfers. ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU] (supports C1) ACPI: Processor [CPU1] (supports C1) Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: faking semi-colon parport0: Printer, HEWLETT-PACKARD DESKJET 720C i2c-core.o: i2c core module version 2.6.4 (20020719) i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719) i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719) i2c-philips-par.o: i2c Philips parallel port adapter module version 2.6.4 (20020719) i2c-philips-par.o: attaching to parport0 i2c-dev.o: Registered 'Philips Parallel port adapter' as minor 0 i2c-algo-pcf.o: i2c pcf8584 algorithm module version 2.6.4 (20020719) i2c-proc.o version 2.6.4 (20020719) matroxfb: Matrox G550 detected matroxfb: MTRR's turned on matroxfb: 640x480x8bpp (virtual: 640x26208) matroxfb: framebuffer at 0xE2000000, mapped to 0xe881b000, size 33554432 Console: switching to colour frame buffer device 80x30 fb0: MATROX VGA frame buffer device pty: 256 Unix98 ptys configured parport0: no more devices allowed lp: driver loaded but no devices found Real Time Clock Driver v1.11 ppdev: user-space parallel port driver Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 564M agpgart: Detected Intel 440BX chipset agpgart: AGP aperture is 64M @ 0xe4000000 [drm] AGP 0.99 on Intel 440BX @ 0xe4000000 64MB MTRR: setting reg 2 MTRR: setting reg 2 [drm] Initialized mga 3.0.2 20010321 on minor 0 block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.1.15-k1 Copyright (c) 2002 Intel Corporation e100: eth0: Intel(R) PRO/100+ Management Adapter Mem:0xe0000000 IRQ:19 Speed:0 Mbps Dx:N/A Failed to detect cable link Speed and duplex will be determined at time of connection Hardware receive checksums enabled cpu cycle saver enabled Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SV2001H, ATA DISK drive hdb: MAXTOR 6L040J2, ATA DISK drive Debug: sleeping function called from illegal context at slab.c:1374 e7fd9e8c c011bc26 c03494c0 c034b4c2 0000055e c04ea1bc c013eea1 c034b4c2 0000055e c04ea340 00000000 00000046 c010eaa2 e7fd8000 e7fd8000 0000000e e7fd8000 c04ea1bc c04ea1f4 c04ea1ac c04ea1bc c024bdd1 c1701650 000001d0 Call Trace: []__might_sleep+0x56/0x5d []kmem_cache_alloc+0x21/0x2f0 []i8259A_irq_pending+0xc2/0xd0 []blk_init_free_list+0x61/0x100 []blk_init_queue+0xd/0xf0 []ide_init_queue+0x28/0x70 []do_ide_request+0x0/0x20 []init_irq+0x330/0x410 []hwif_init+0x10c/0x260 []probe_hwif_init+0x1d/0x70 []ide_setup_pci_device+0x41/0x70 []init+0x8b/0x250 []init+0x0/0x250 []kernel_thread_helper+0x5/0xc ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-ROM 52X L, ATAPI CD/DVD-ROM drive hdd: RWD RW2224, ATAPI CD/DVD-ROM drive Debug: sleeping function called from illegal context at slab.c:1374 e7fd9e8c c011bc26 c03494c0 c034b4c2 0000055e c04ea7b0 c013eea1 c034b4c2 0000055e c04ea934 00000000 00000046 c010eaa2 e7fd8000 e7fd8000 0000000f e7fd8000 c04ea7b0 c04ea7e8 c04ea7a0 c04ea7b0 c024bdd1 c1701650 000001d0 Call Trace: []__might_sleep+0x56/0x5d []kmem_cache_alloc+0x21/0x2f0 []i8259A_irq_pending+0xc2/0xd0 []blk_init_free_list+0x61/0x100 []blk_init_queue+0xd/0xf0 []ide_init_queue+0x28/0x70 []do_ide_request+0x0/0x20 []init_irq+0x330/0x410 []hwif_init+0x10c/0x260 []probe_hwif_init+0x1d/0x70 []ide_setup_pci_device+0x65/0x70 []init+0x8b/0x250 []init+0x0/0x250 []kernel_thread_helper+0x5/0xc ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 39179952 sectors (20060 MB) w/1945KiB Cache, CHS=2438/255/63, UDMA(33) hda: hda1 hdb: host protected area => 1 hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63, UDMA(33) hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 > hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: RWD Model: RW2224 Rev: 2.06 Type: CD-ROM ANSI SCSI revision: 02 Debug: sleeping function called from illegal context at slab.c:1374 e7fd9ee8 c011bc26 c03494c0 c034b4c2 0000055e e7ffc060 c013f1bf c034b4c2 0000055e e7fd9f18 00000286 00000286 e7dfac00 c024bd53 e7dfac1c e7dfac28 e7dfac00 00000001 e7d8d800 e7ffd000 00001000 e7fd8000 00001000 c013d1dd Call Trace: []__might_sleep+0x56/0x5d []kmalloc+0x4f/0x330 []blk_cleanup_queue+0x53/0x70 []get_vm_area+0x1d/0x140 []__vmalloc+0x3b/0x120 []vmalloc+0x16/0x20 []sg_init+0xbe/0x160 []scsi_register_device+0x8d/0x130 []init+0x8b/0x250 []init+0x0/0x250 []kernel_thread_helper+0x5/0xc matroxfb_crtc2: secondary head of fb0 was registered as fb1 i2c-dev.o: Registered 'DDC:fb0 #0 on i2c-matroxfb' as minor 1 i2c-dev.o: Registered 'DDC:fb0 #1 on i2c-matroxfb' as minor 2 i2c-dev.o: Registered 'MAVEN:fb0 on i2c-matroxfb' as minor 3 uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 hcd-pci.c: uhci-hcd @ 00:04.2, Intel Corp. 82371AB/EB/MB PIIX4 USB hcd-pci.c: irq 19, io base 0000d400 hcd.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found at 0 hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v2.0:USB HID core driver register interface 'mouse' with class 'input mice: PS/2 mouse device common for all mice register interface 'event' with class 'input serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c-core.o: i2c core module version 2.6.4 (20020719) i2c-dev.o: i2c /dev entries driver module version 2.6.4 (20020719) i2c-proc.o version 2.6.4 (20020719) md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 732.000 MB/sec 32regs : 360.000 MB/sec pII_mmx : 892.000 MB/sec p5_mmx : 916.000 MB/sec raid5: using function: p5_mmx (916.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 336k freed hub.c: new USB device 00:04.2-1, assigned address 2 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-00:04.2-1 Adding 128512k swap on /dev/hdb3. Priority:-1 extents:1 Adding 128512k swap on /dev/hdb2. Priority:-2 extents:1 Adding 128480k swap on /dev/hdb5. Priority:-3 extents:1 Adding 128480k swap on /dev/hdb6. Priority:-4 extents:1 Adding 128480k swap on /dev/hdb7. Priority:-5 extents:1 EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,72), internal journal FAT: Using codepage cp437 FAT: Using IO charset iso8859-1 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,73), internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: DMA disabled hdd: DMA disabled au88xx: Loading... au88xx: Found vortex PCI device: au88xx: id=0x0001 au88xx: bar0=0xde800000 au88xx: irq=17 au88xx: Add device, audio=3, mixer=0, midi=2