From: "Krzysztof \"Filo\" Gorgolewski" <kgorgolewski@skrzynka.pl>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: System hangs while Partition check: with 2.4.20-rc1 kernel
Date: Sat, 02 Nov 2002 17:19:55 +0100 [thread overview]
Message-ID: <3DC3FB2B.9000208@skrzynka.pl> (raw)
1. System hangs while Partition check: with 2.4.20-rc1 kernel
2. In the first stages of kernel loading compure hangs just after
viewing "Partition check:" + the symbilic name of the disk (like hde)
message. It occurs only with disks connected to HighPoint 370 disk
controller (octually built in Abit BE6-II v. 1.2 mainboard). Changing
the channels doesn't solve the problem.
3. IDE, HPT370, kernel, Partition check:
4. 2.4.20-rc1 as well as 2.4.19, 2.4.20-pre8 and 2.4.20-pre8-ac2 (in
2.4.18 and earlylier everything was OK - I have not checked all
development versions of 2.4.19 and 2.4.20).
5. No Oops.
7.1 gcc 2.96(the RedHat edition)
7.2 Pentium III 866Mhz
7.3 No modules (I have not even built in kmod)
7.6 No SCSI (no support built in or any hardware)
7.7 HighPoint 370 disk controller built in Abit BE6-II v. 1.2 mainboard
8. I'm ready to help in any way. I can test patches, sent additional
debug info and more. This bug is very crucial - I can't use new kernels
without it.
Here is the log:
"...
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with ide bus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
HPT370: IDE controller on PCI bus 00 dev 98
PCI: Found IRQ11 for device 00:13.0
HPT370: chipset revision 3
HPT370: not 100% native mode will probe irqs later
HPT370: using 33MHz PCI clock
ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:DMA, hdh:pio
hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive
hdg: ST320420A, ATA disk drive
ide1 at 0x170-0x177, 0x376 on irq 15
ide3 at 0xb800-0xb807, 0xbc02 on irq 11
blk: queue c0350890, I/O limit 4095 Mb(mask 0xffffffff)
hdg: 398851760 sectors (20404 MB) w/2048 KiB cache, CHS=39535/16/63,
UDMA(66)
hdc: ATAPI 40x DVD-ROM drive, 512 kb cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hdg:
"
I hope debugging wont be complicated in this case.
Chris Gorgolewski
reply other threads:[~2002-11-02 16:13 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DC3FB2B.9000208@skrzynka.pl \
--to=kgorgolewski@skrzynka.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®