From: jan <jan@seismo.ifg.ethz.ch>
To: linux-kernel@vger.kernel.org
Subject: A7M266-D
Date: Thu, 21 Nov 2002 15:33:42 +0100 [thread overview]
Message-ID: <3DDCEEC6.5030806@seismo.ifg.ethz.ch> (raw)
dear list,
i have an A7M266-D board with two AMD Athlon MP 2000+ on it.
Unfortunately I am unable to compile the correct driver for the AM7441
IDE Controller (using 2.4.19)
I always get this under SuSE :
AMD7441: detected chipset, but driver not compiled in!
When using a precompiled SUSE or RedHat Kernel it gets recognized.
SuSE Linux 2.4.18-64GB-SMP output :
AMD_IDE: IDE controller on PCI bus 00 dev 39
AMD_IDE: chipset revision 4
AMD_IDE: not 100% native mode: will probe irqs later
AMD_IDE: AMD-768 Opus (rev 04) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
RedHat 2.4.18-14smp output :
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
What am I doing wrong ? and why RedHat and SuSE Kernel have no Problem
with this Chipset ?
best regards,
Jan
next reply other threads:[~2002-11-21 14:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-21 14:33 jan [this message]
2002-11-21 15:37 ` A7M266-D Alan Cox
2002-11-21 15:58 ` A7M266-D Marcus Sundberg
2002-11-21 16:08 ` A7M266-D jan
2002-11-21 16:09 ` A7M266-D Steve Lee
-- strict thread matches above, loose matches on Subject: below --
2002-11-21 16:24 A7M266-D Shawn Starr
2002-11-22 7:13 ` A7M266-D jan
2002-02-19 16:33 A7M266-D Mark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DDCEEC6.5030806@seismo.ifg.ethz.ch \
--to=jan@seismo.ifg.ethz.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®