Connecting to /dev/ttyS0, speed 9600. The escape character is Ctrl-\ (ASCII 28, FS) Type the escape character followed by C to get back, or followed by ? to see other options. ---------------------------------------------------- Linux version 2.5.50-1jpl (root@mulan.jpl.nasa.gov) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 SMP Wed Nov 27 15:27:37 PST 2002 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff77000 (usable) BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) BIOS-e820: 000000001ff79000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 130935 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126839 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: WS 530 APIC at: 0xFEE00000 Processor #0 15:1 APIC version 20 Processor #1 15:1 APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=2550-1jpl ro root=805 devfs=mount hda=ide-scsi console=ttyS0,9600 console=tty0 ide_setup: hda=ide-scsi Initializing CPU#0 Detected 1694.687 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3342.33 BogoMIPS Memory: 513588k/523740k available (2129k kernel code, 9372k reserved, 1231k data, 120k init, 0k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled Machine check exception polling timer started. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Xeon(TM) CPU 1.70GHz stepping 02 per-CPU timeslice cutoff: 731.29 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3383.29 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 1.70GHz stepping 02 Total of 2 processors activated (6725.63 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1694.0605 MHz. ..... host bus clock speed is 99.0682 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 32 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=4 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.9 (c) Adam Belay block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Br PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 PCI->APIC IRQ transform: (B0,I31,P3) -> 19 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P2) -> 23 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B3,I14,P0) -> 22 PCI->APIC IRQ transform: (B4,I11,P0) -> 23 PCI->APIC IRQ transform: (B4,I12,P0) -> 16 PCI->APIC IRQ transform: (B4,I15,P0) -> 19 SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 aio_setup: sizeof(struct page) = 40 [dff0c080] eventpoll: successfully initialized. VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS CVS-09/15/02:17 with ACLs, realtime, quota, no debug enabled Capability LSM initialized Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled tts/0 at I/O 0x3f8 (irq = 4) is a 16550A tts/1 at I/O 0x2f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 i810_rng hardware driver 0.9.8 loaded Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio hda: Hewlett-Packard DVD Writer 200, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Vendor: FUJITSU Model: MAN3184MP Rev: 5507 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Vendor: FUJITSU Model: MAJ3182MP Rev: 5508 Type: Direct-Access ANSI SCSI revision: 04 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 SCSI device sda: drive cache: write back SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 scsi0:A:1:0: Tagged Queuing enabled. Depth 253 SCSI device sdb: drive cache: write back SCSI device sdb: 35566478 512-byte hdwr sectors (18210 MB) /dev/scsi/host0/bus0/target1/lun0: p1 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. XFS mounting filesystem sd(8,5) VFS: Mounted root (xfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 120k freed SysRq : HELP : loglevel0-8 reBoot tErm kIll saK showMem showPc unRaw Sync showTasks Unmount SysRq : Changing Loglevel Loglevel set to 8 scsi: Device offlined - not ready or command retry failed after error recovery: host 1 channel 0 id 0 lun 0 XFS mounting filesystem sd(8,7) Ending clean XFS mount for filesystem: sd(8,7) XFS mounting filesystem sd(8,8) Ending clean XFS mount for filesystem: sd(8,8) XFS mounting filesystem sd(8,17) Ending clean XFS mount for filesystem: sd(8,17) ohci1394: $Rev: 601 $ Ben Collins ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fe1ff000-fe1ff7ff] Max Packet=[2048] Debug: sleeping function called from illegal context at mm/slab.c:1304 Call Trace: [] kmem_flagcheck+0x61/0x64 [] kmalloc+0x5c/0xbe [] <1>Unable to handle kernel paging request at virtual address e08e4e14 printing eip: c013612e *pde = 1fe8f067 *pte = 00000000 Oops: 0000 CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010246 EIP is at __print_symbol+0x48/0x11a eax: 00000000 ebx: e08ee064 ecx: ffffffff edx: e08e4e14 esi: dec85db0 edi: e08e4e14 ebp: dec85e00 esp: dec85db0 ds: 0068 es: 0068 ss: 0068 Process modprobe (pid: 471, threadinfo=dec84000 task=df521d00) Stack: e0810000 e08ee064 dec85de0 dec85ddc 00000008 c04809df e081000c 00000246 0000000e dec85e00 e081000c 00000020 000040b8 c031e803 dec85e10 00000400 c0325001 e08ee064 dff762c0 00000282 dec85e14 c010c297 c0324bff e08ee064 Call Trace: [] <1>Unable to handle kernel paging request at virtual address e08e4e14 printing eip: c013612e *pde = 1fe8f067 *pte = 00000000 SysRq : HELP : loglevel0-8 reBoot tErm kIll saK showMem showPc unRaw Sync showTasks Unmount SysRq : Show Memory Mem-info: Free pages: 491512kB ( 0kB HighMem) Zone:DMA freepages: 12072kB min: 128kB low: 256kB high: 384kB active: 0kB inactive: 0kB Zone:Normal freepages:479440kB min: 1020kB low: 2040kB high: 3060kB active: 6624kB inactive: 6448kB Zone:HighMem freepages: 0kB min: 0kB low: 0kB high: 0kB active: 0kB inactive: 0kB ( Active:1656 inactive:1612 dirty:0 writeback:0 free:122878 ) 2*4kB 2*8kB 3*16kB 1*32kB 3*64kB 2*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 2*4096kB = 12072kB) 36*4kB 10*8kB 3*16kB 0*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 116*4096kB = 479440kB) Swap cache: add 0, delete 0, find 0/0, race 0+0 Free swap: 1020088kB 130935 pages of RAM 0 pages of HIGHMEM 2409 reserved pages 1282 pages shared 0 pages swap cached SysRq : Show State free sibling task PC stack pid father child younger older init S C042F300 0 1 0 2 (NOTLB) Call Trace: [] schedule_timeout+0x6a/0xbc [] process_timeout+0x0/0xa [] do_select+0x131/0x24c [] __pollwait+0x0/0xaa [] sys_select+0x2a6/0x4a8 [] sys_stat64+0x35/0x38 [] syscall_call+0x7/0xb migration/0 S C042E900 0 2 1 3 (L-TLB) Call Trace: [] migration_thread+0x339/0x346 [] migration_thread+0x0/0x346 [] kernel_thread_helper+0x5/0xc ksoftirqd/0 S DF85B588 0 3 1 4 2 (L-TLB) Call Trace: [] ksoftirqd+0xc0/0x10c [] ksoftirqd+0x0/0x10c [] kernel_thread_helper+0x5/0xc migration/1 S C042F300 0 4 1 5 3 (L-TLB) Call Trace: [] sprintf+0x1f/0x24 [] migration_thread+0x339/0x346 [] ret_from_fork+0x5/0x14 [] migration_thread+0x0/0x346 [] kernel_thread_helper+0x5/0xc ksoftirqd/1 S C042F300 0 5 1 6 4 (L-TLB) Call Trace: [] sprintf+0x1f/0x24 [] ksoftirqd+0xc0/0x10c [] ksoftirqd+0x0/0x10c [] kernel_thread_helper+0x5/0xc events/0 S DFC2DA8C 0 6 1 7 5 (L-TLB) Call Trace: [] sprintf+0x1f/0x24 [] worker_thread+0x2fe/0x32a [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] worker_thread+0x0/0x32a [] kernel_thread_helper+0x5/0xc events/1 S C042F300 0 7 1 8 6 (L-TLB) Call Trace: [] worker_thread+0x2fe/0x32a [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] worker_thread+0x0/0x32a [] kernel_thread_helper+0x5/0xc kswapd0 S C02269E7 0 8 1 9 7 (L-TLB) Call Trace: [] vsprintf+0x27/0x2c [] sprintf+0x1f/0x24 [] kswapd+0xec/0x11c [] schedule+0x37/0x406 [] autoremove_wake_function+0x0/0x4c [] autoremove_wake_function+0x0/0x4c [] kswapd+0x0/0x11c [] kernel_thread_helper+0x5/0xc pdflush S DFD0B500 0 9 1 10 8 (L-TLB) Call Trace: [] reparent_to_init+0x108/0x1ac [] __pdflush+0x1dd/0x3da [] preempt_schedule+0x36/0x50 [] schedule_tail+0x8a/0x8c [] pdflush+0x0/0x16 [] pdflush+0x11/0x16 [] kernel_thread_helper+0x5/0xc pdflush S C042F300 0 10 1 11 9 (L-TLB) Call Trace: [] __pdflush+0x1dd/0x3da [] preempt_schedule+0x36/0x50 [] schedule_tail+0x8a/0x8c [] pdflush+0x0/0x16 [] pdflush+0x11/0x16 [] kernel_thread_helper+0x5/0xc aio/0 S DFEF7780 0 11 1 12 10 (L-TLB) Call Trace: [] do_sigaction+0x17e/0x18a [] sprintf+0x1f/0x24 [] worker_thread+0x2fe/0x32a [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] worker_thread+0x0/0x32a [] kernel_thread_helper+0x5/0xc aio/1 S C042F300 0 12 1 13 11 (L-TLB) Call Trace: [] do_sigaction+0x17e/0x18a [] worker_thread+0x2fe/0x32a [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] worker_thread+0x0/0x32a [] kernel_thread_helper+0x5/0xc pagebufd S C042F300 0 13 1 14 12 (L-TLB) Call Trace: [] interruptible_sleep_on+0xaf/0x138 [] default_wake_function+0x0/0x3e [] xfs_bdstrat_cb+0x0/0x46 [] pagebuf_daemon+0x33d/0x352 [] preempt_schedule+0x36/0x50 [] pagebuf_daemon_wakeup+0x0/0x2a [] pagebuf_daemon+0x0/0x352 [] kernel_thread_helper+0x5/0xc pagebuf/0 S C042E900 0 14 1 15 13 (L-TLB) Call Trace: [] sprintf+0x1f/0x24 [] worker_thread+0x2fe/0x32a [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] worker_thread+0x0/0x32a [] kernel_thread_helper+0x5/0xc pagebuf/1 S C042F300 0 15 1 16 14 (L-TLB) Call Trace: [] worker_thread+0x2fe/0x32a [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] worker_thread+0x0/0x32a [] kernel_thread_helper+0x5/0xc scsi_eh_0 S 00000096 0 16 1 17 15 (L-TLB) Call Trace: [] default_wake_function+0x32/0x3e [] __down_interruptible+0x10a/0x1e6 [] default_wake_function+0x0/0x3e [] __down_failed_interruptible+0xa/0x10 [] .text.lock.scsi_error+0xb1/0xc2 [] scsi_error_handler+0x0/0x1e6 [] kernel_thread_helper+0x5/0xc kseriod S DFC23FA0 0 17 1 18 16 (L-TLB) Call Trace: [] add_wait_queue+0xa3/0xa6 [] serio_thread+0xe1/0x140 [] default_wake_function+0x0/0x3e [] serio_thread+0x0/0x140 [] kernel_thread_helper+0x5/0xc init S DFC2DC38 0 18 1 19 117 17 (NOTLB) Call Trace: [] sys_wait4+0x1f8/0x504 [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] syscall_call+0x7/0xb rc.sysinit S DFC2D734 0 19 18 440 (NOTLB) Call Trace: [] linvfs_readv+0x3f/0x44 [] sys_wait4+0x1f8/0x504 [] default_wake_function+0x0/0x3e [] sys_rt_sigprocmask+0x16a/0x27a [] default_wake_function+0x0/0x3e [] syscall_call+0x7/0xb devfsd S DF636DE4 0 117 1 303 18 (NOTLB) Call Trace: [] devfsd_read+0x104/0x452 [] cp_new_stat64+0xb4/0xcc [] default_wake_function+0x0/0x3e [] default_wake_function+0x0/0x3e [] vfs_read+0xd3/0x13a [] filp_close+0xb5/0xd4 [] sys_read+0x3c/0x52 [] syscall_call+0x7/0xb scsi_eh_1 S DFD4002C 0 303 1 117 (L-TLB) Call Trace: [] elv_next_request+0x11/0xf2 [] __down_interruptible+0x10a/0x1e6 [] default_wake_function+0x0/0x3e [] __down_failed_interruptible+0xa/0x10 [] .text.lock.scsi_error+0xb1/0xc2 [] scsi_error_handler+0x0/0x1e6 [] kernel_thread_helper+0x5/0xc rc.sysinit S DF85BC38 0 440 19 470 441 (NOTLB) Call Trace: [] sys_wait4+0x1f8/0x504 [] default_wake_function+0x0/0x3e [] sys_rt_sigprocmask+0x16a/0x27a [] default_wake_function+0x0/0x3e [] syscall_call+0x7/0xb getkey S C042E900 0 441 19 440 (NOTLB) Call Trace: [] schedule_timeout+0xb9/0xbc [] tty_poll+0x7e/0x96 [] do_pollfd+0x57/0x98 [] do_poll+0xaa/0xf8 [] sys_poll+0x156/0x2cf [] __pollwait+0x0/0xaa [] syscall_call+0x7/0xb initlog S C042F300 0 470 440 471 (NOTLB) Call Trace: [] schedule_timeout+0x6a/0xbc [] process_timeout+0x0/0xa [] do_poll+0xaa/0xf8 [] sys_poll+0x156/0x2cf [] __pollwait+0x0/0xaa [] syscall_call+0x7/0xb modprobe R DEC85E9C 0 471 470 (NOTLB) Call Trace: [] <1>Unable to handle kernel paging request at virtual address e08e558b printing eip: c013612e *pde = 1fe8f067 *pte = 00000000  Closing /dev/ttyS0...OK