mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mark Rutherford <mark@justirc.net>
To: Petr Vandrovec <VANDROVE@vc.cvut.cz>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [2.4.20] Trouble with via 8235 [does not boot]
Date: Fri, 29 Nov 2002 19:24:11 -0500	[thread overview]
Message-ID: <3DE8052B.F1072528@justirc.net> (raw)
In-Reply-To: <8F01E9B6A83@vcnet.vc.cvut.cz>

I wanted to ask about this but forgot....
 Nov 29 18:14:24 Darkstar kernel: PDC20276: neither IDE port enabled (BIOS)
                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

now, this works in 2.4.19, and i can use the devices.
in 2.5.44 its detected as such, didnt realise until I tried to use my zip drive, which is attached to
it.
these devices arent disabled, altho it says they are... there isnt really a 'bios' to enable them in.
it just detects the devices at boot.
im going to try to write some stuff down when it boots, as i dont have a serial cable to monitor its
activities.
but, definately interesting.


Petr Vandrovec wrote:

> On 29 Nov 02 at 18:58, Mark Rutherford wrote:
>
> > I think I have but i will let you all be the judge.
> > please find attached my .config renamed to config.txt for the sake of
> > window$
>
> Nothing strange in it...
>
> > also find attached a normal bootup as of 1 hour ago using kernel 2.5.44
> > I have tried the following:
> > re-downloaded the kernel souces in both tar/bz2 and tar/gzip formats
> > both archives were the same, natually
> > reconfigured both to no avail.
> > what I do not understand is that it does not detect the 2 devices i have
> > on the promise controller, or hda, hdb
> > it does find hdc and hdd and it does seem to detect the via 8235
> > controller as well.
> > what could possibly be wrong here?
>
> >From log you posted:
>
> > Nov 29 18:14:24 Darkstar kernel: PDC20276: IDE controller at PCI slot 00:0f.0
> > Nov 29 18:14:24 Darkstar kernel: PDC20276: chipset revision 1
> > Nov 29 18:14:24 Darkstar kernel: PDC20276: not 100%% native mode: will probe irqs later
> > Nov 29 18:14:24 Darkstar kernel: PDC20276: neither IDE port enabled (BIOS)
>                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > Nov 29 18:14:24 Darkstar kernel: VP_IDE: IDE controller at PCI slot 00:11.1
> > Nov 29 18:14:24 Darkstar kernel: VP_IDE: chipset revision 6
> > Nov 29 18:14:24 Darkstar kernel: VP_IDE: not 100%% native mode: will probe irqs later
> > Nov 29 18:14:24 Darkstar kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
> > Nov 29 18:14:24 Darkstar kernel: hda: setmax LBA 156250080, native 156250000
> > Nov 29 18:14:24 Darkstar kernel: hda: 156250000 sectors (80000 MB)
> > w/2048KiB Cache, CHS=9726/255/63, UDMA(100)
> > Nov 29 18:14:24 Darkstar kernel:  hda: hda1
> > Nov 29 18:14:24 Darkstar kernel: hdb: 26564832 sectors (13601 MB)
> > w/2048KiB Cache, CHS=1653/255/63, UDMA(66)
> > Nov 29 18:14:24 Darkstar kernel:  hdb: hdb1 hdb2
> > Nov 29 18:14:24 Darkstar kernel: Uniform CD-ROM driver Revision: 3.12
>
> It looks to me like that 2.5.44 also believes that you have
> two HDDs connected to VIA, and none to Promise. Did not just
> 2.4.20 swapped hda/hdb with hdc/hdd?
>
> It would be really handy if you could write down logs from 2.4.20. Or
> capture them with serial console.
>
> You can also boot 2.5.x, look at which address your via lives, and
> then use ide0=... parameters. I believe that via should be configured
> for primary IDE, so try booting 2.4.20 with ' ide0=0x1f0,0x3f6,14'.
>                                             Petr Vandrovec
>                                             vandrove@vc.cvut.cz
>

--
Regards,
Mark Rutherford
mark@justirc.net


File: Mark Rutherford.ASC
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>
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=hpbN
-----END PGP PUBLIC KEY BLOCK-----


  reply	other threads:[~2002-11-30  0:17 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-11-30  0:17 Petr Vandrovec
2002-11-30  0:24 ` Mark Rutherford [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-11-29 23:58 Mark Rutherford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3DE8052B.F1072528@justirc.net \
    --to=mark@justirc.net \
    --cc=VANDROVE@vc.cvut.cz \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome