From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 27 Jan 2003 11:08:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 27 Jan 2003 11:08:54 -0500 Received: from endoscop.inria.fr ([138.96.70.6]:47620 "EHLO endoscop.inria.fr") by vger.kernel.org with ESMTP id ; Mon, 27 Jan 2003 11:08:29 -0500 Message-ID: <3E355BAA.BF0FADC3@sophia.inria.fr> Date: Mon, 27 Jan 2003 17:17:46 +0100 From: David Geldreich X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: fr-FR, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: PROBLEM: ioremap returning NULL and non-NULL for the same high memory adresses Content-Type: multipart/mixed; boundary="------------A8D8F034E89FBC69C644EF82" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------A8D8F034E89FBC69C644EF82 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit [1.] ioremap returning NULL and non-NULL for the same high memory adresses [2.] some drivers uses high memory limiting the kernel usage with mem=800M and using the above memory. With a kernel compiled with CONFIG_HIGHMEM4G=y, ioremap returns NULL for some high memory adress where it returned a non-NULL value for the same high memory adress. To test the available memory, the driver starts at high-memory and probes each page (ioremap it, write into it, read the written value, iounmap it). When the read value != from the written value it assumes that it is the end of the physical memory. After the driver try to ioremap buffers in this high memory, for the first buffers ioremap returns right values but after some calls it returns 0x00000. In the case of mem=800M, it stops around 180M (430 buffers of 442368 bytes) instead of the 224M free reported by the available memory test. [3.] keywords: kernel, memory, ioremap [4.] Kernel version : Linux version 2.4.17 (dgeld@orcus) (gcc version 2.95.3 20010315 (release)) #1 Mon Jan 27 14:02:56 MET 2003 [5.] no Oops on a 1GB machine, with mem=950M, and a debug kernel, I got a "kernel BUG at page_alloc:84!". With mem=800M, I did not get this message [6.] attached a small module that reproduce the problem. To use it make make install insmod mem1 dmask=2 on a 1GB machine with kernel option mem=800M, all the tests in himem_search works OK, this returns 224MB free. When mem1_module_init try to use this high memory, ioremap returns NULL after the 980MB barrier. [7.] [7.1] Software Linux forceps 2.4.17 #1 Mon Jan 27 14:02:56 MET 2003 i686 unknown Gnu C 2.95.3 Gnu make 3.80 binutils 2.11.90.0.8 util-linux 2.11n mount 2.11n modutils 2.4.12 e2fsprogs 1.25 pcmcia-cs 3.1.33 PPP 2.3.11 Linux C Library 2.1.3 Dynamic linker (ldd) 2.1.3 Procps 2.0.6 Net-tools 1.54 Console-tools 1999.03.02 Sh-utils 2.0 Modules Loaded mousedev keybdev hid input usb-storage usb-uhci usbcore [7.2.] biXeon 2GHz computer, configured in non-SMP (due to meteor2 driver SMP bug) root@forceps# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) XEON(TM) CPU 2.00GHz stepping : 4 cpu MHz : 1995.162 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3984.58 [7.3.] root@forceps# cat /proc/modules mousedev 3872 0 (unused) keybdev 1664 0 (unused) hid 12736 0 (unused) input 3072 0 [mousedev keybdev hid] usb-storage 22748 0 (unused) usb-uhci 21316 0 (unused) usbcore 49216 1 [hid usb-storage usb-uhci] [7.4.] root@forceps# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 1080-10bf : Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller 10c0-10df : Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) 10c0-10df : usb-uhci 10e0-10ef : Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 10e0-10e7 : ide0 10e8-10ef : ide1 10f0-10ff : Intel Corp. 82820 820 (Camino 2) Chipset SMBus 1400-14ff : Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller 2000-2fff : PCI Bus #02 2000-2fff : PCI Bus #03 2000-201f : Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] 2000-201f : PCnet/FAST III 79C973 3000-3fff : PCI Bus #04 3000-307f : PLX Technology, Inc. PCI <-> IOBus Bridge 3080-30bf : Intel Corp. 82557 [Ethernet Pro 100] 3080-30bf : eepro100 root@forceps# cat /proc/iomem 00000000-0009efff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-31ffffff : System RAM 00100000-002450d1 : Kernel code 002450d2-002ccc77 : Kernel data c0000000-c0ffffff : PCI Bus #01 c0000000-c0ffffff : PCI device 10de:0250 (nVidia Corporation) c1000000-c10fffff : PCI Bus #02 c1000000-c10fffff : PCI Bus #03 c1000000-c100ffff : Intel Corp. 82543GC Gigabit Ethernet Controller c1010000-c1010fff : Intel Corp. 82806AA PCI64 Hub Advanced Programmable Interrupt Controller c1011000-c101101f : Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] c1020000-c103ffff : Intel Corp. 82543GC Gigabit Ethernet Controller c1100000-c11fffff : PCI Bus #04 c1100000-c1100fff : Matrox Graphics, Inc. VIA Framegrabber c1101000-c11010ff : PLX Technology, Inc. PCI <-> IOBus Bridge c1101400-c11014ff : PLX Technology, Inc. PCI <-> IOBus Bridge c1101800-c11018ff : PLX Technology, Inc. PCI <-> IOBus Bridge c1101c00-c1101cff : PLX Technology, Inc. PCI <-> IOBus Bridge c1102000-c110207f : PLX Technology, Inc. PCI <-> IOBus Bridge c1103000-c1103fff : Intel Corp. 82557 [Ethernet Pro 100] c1103000-c1103fff : eepro100 c1120000-c113ffff : Intel Corp. 82557 [Ethernet Pro 100] d0000000-dfffffff : Intel Corp. 82850 860 (Wombat) Chipset Host Bridge (MCH) e0000000-e80fffff : PCI Bus #01 e0000000-e7ffffff : PCI device 10de:0250 (nVidia Corporation) e8000000-e807ffff : PCI device 10de:0250 (nVidia Corporation) f0000000-f7ffffff : PCI Bus #04 f0000000-f7ffffff : Matrox Graphics, Inc. VIA Framegrabber [7.5.] 00:00.0 Host bridge: Intel Corp. 82850 860 (Wombat) Chipset Host Bridge (MCH) (rev 04) Subsystem: Hewlett-Packard Company: Unknown device 1274 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:02.0 PCI bridge: Intel Corp. 82860 860 (Wombat) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate= 02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable Interrupt Controller (rev 01) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corp. 82806AA PCI64 Hub APIC Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- [disabled] [size=1M] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- 03:05.0 Ethernet controller: Intel Corp. 82543GC Gigabit Ethernet Controller (rev 02) Subsystem: Intel Corp. PRO/1000 F Server Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:06.0 Bridge: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: PLX Technology, Inc. PCI <-> IOBus Bridge Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- #include #include #include #ifdef CONFIG_PROC_FS #include #endif #include #include #include #include #include #include #include #include #include #include struct himem_node { __u32 addr; __u32 len; int used; struct himem_node *next; struct himem_node *prev; }; /* Head of Himem List */ static struct himem_node *himem_head = NULL; #define VIA_MAX_HIMEM (256*1024*1024) #define SIZE_IN_KB(x) (x >> 10) static unsigned long dmask = 0; void via_get_himem (void); void via_free_mem (void); #ifdef MODULE_PARM MODULE_PARM (dmask, "l"); MODULE_PARM_DESC (dmask, "debug mask"); #endif #ifndef DEBUG_MASK #define DEBUG_MASK dmask #endif #define via_debug(mask,fmt,arg...) \ { if ((mask & DEBUG_MASK) == mask) via_printk(KERN_INFO,fmt,##arg); } #define via_printk(kern_level,fmt,arg...) \ printk(kern_level "mem1" "[" __FUNCTION__ "]: " fmt,##arg); #define via_info(fmt,arg...) via_printk(KERN_INFO,fmt,##arg); #define via_error(fmt,arg...) via_printk(KERN_ERR,fmt,##arg); struct mem1_buf { unsigned long addr; /* physical address/on-board offset */ void *virt; __u32 offset; __u32 length; }; static struct mem1_buf* stream_buf = NULL; static int num_stream_buf = 0; static int __init mem1_module_init (void) { int size = PAGE_ALIGN(768*576), free, cb; via_info("loading driver (dmask: 0x%lx)\n", dmask); via_get_himem(); /* setup himem bufs */ free = himem_head->len / size; via_info("setting up %d buffers of len : %d KB\n", free, size); stream_buf = kmalloc(free * sizeof(struct mem1_buf), GFP_KERNEL); num_stream_buf = free; if (stream_buf == NULL) { via_error("kmalloc(stream_buf[%d]) failed\n", free); return -ENOMEM; } for (cb = 0; cb < free; cb++) { stream_buf[cb].offset = cb*size; stream_buf[cb].length = size; stream_buf[cb].addr = himem_head->addr + cb*size; via_debug(1, "stream[%d] : off(0x%x) len(%d) addr(0x%p)\n", cb, stream_buf[cb].offset, stream_buf[cb].length, (void *)stream_buf[cb].addr); stream_buf[cb].virt = NULL; } via_info("remapping high memory\n"); for (cb = 0; cb < free; cb++) { stream_buf[cb].virt = ioremap(stream_buf[cb].addr, stream_buf[cb].length); if (stream_buf[cb].virt == NULL) { via_info("ioremap returned NULL for buffer # %d when %d was wanted\naddr/size->virt: 0x%lx/%x->0x%p\n", cb, free, stream_buf[cb].addr, stream_buf[cb].length, stream_buf[cb].virt); break; } via_debug(1, "addr/size->virt: 0x%lx/%x->0x%p\n", stream_buf[cb].addr, stream_buf[cb].length, stream_buf[cb].virt); } return 0; } static void __exit mem1_module_exit (void) { int cb; if (stream_buf != NULL) { via_info("unmapping %d bufs in high memory\n", num_stream_buf); for (cb = 0; cb < num_stream_buf; cb++) { if (stream_buf[cb].virt == NULL) continue; iounmap(stream_buf[cb].virt); via_info("stream_buf[%d].virt: 0x%p\n", cb, stream_buf[cb].virt); stream_buf[cb].virt = NULL; } kfree(stream_buf); } via_free_mem(); via_info("driver unloaded\n"); } /* * Search the high memory to find out how much is present. * * NOTE: * This is done in a non-cooperative way! I.e. we assume *ALL* high memory * is for our exclusive usage (any data in that area used by other resources * will be destroyed!). * * FIXME: This should be fixed using bigphysarea or other means. */ int himem_search (void) { __u32 himem_size; __u8 *tst_addr, twr, trd; if (himem_head != NULL) { via_error("High memory already in use.\n"); return -1; } /* allocate memory */ himem_head = (struct himem_node *) kmalloc (sizeof (struct himem_node), GFP_KERNEL); if (himem_head == NULL) { via_error("kmalloc() failed\n"); return -1; } /* high_memory points to memory beyond area that the kernel uses */ himem_head->addr = (__u32) virt_to_phys ((void *) high_memory); himem_size = 0; for (twr = 1; himem_size < VIA_MAX_HIMEM; twr++) { /* himem_size tested to prevent infinite loop */ tst_addr = ioremap ((__u32) (himem_head->addr + himem_size), PAGE_SIZE); via_debug(2, "himem addr/virt: 0x%x/0x%p\n", himem_head->addr + himem_size, tst_addr); if (tst_addr == NULL) break; writeb (twr, tst_addr); trd = twr - 1; trd = readb (tst_addr); iounmap (tst_addr); if (trd == twr) himem_size += PAGE_SIZE; else break; } himem_head->len = himem_size; himem_head->used = 0; himem_head->next = NULL; himem_head->prev = NULL; if (himem_size == 0) { via_error("no high memory found, use mem= option to kernel\n"); via_free_mem(); return -1; } else { via_info("found %d kB of high memory at 0x%lx (phys)\n", SIZE_IN_KB (himem_size), (unsigned long) himem_head->addr); } return himem_size; } /* * What we do here: * - assume, *all* himemory is for us * - thus, check how much himem is present * - spread all the available himem equally to all boards * * ... we miss a generic himem handler of the kernel here. */ void via_get_himem (void) { if ((himem_search() > 0) && (himem_head != NULL)) { via_info("himem_head->len:%d KB himem_head->addr:0x%x\n", SIZE_IN_KB(himem_head->len), himem_head->addr); } } /* free all memory used by memory handling functions */ void via_free_mem (void) { if (himem_head != NULL) { kfree (himem_head); himem_head = NULL; } } module_init(mem1_module_init); module_exit(mem1_module_exit); MODULE_AUTHOR("David Geldreich "); MODULE_DESCRIPTION("Test highmem usage"); MODULE_LICENSE("GPL"); --------------A8D8F034E89FBC69C644EF82 Content-Type: text/plain; charset=us-ascii; name="Makefile" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="Makefile" ################################################# # config # where the kernel sources are located RUNNING := /lib/modules/$(shell uname -r)/build KERNEL_DIR := $(shell if test -d $(RUNNING); then echo $(RUNNING); else echo /usr/src/linux; fi) #KERNEL_DIR := /net/home/dgeld/tmp/kf/2.4.17/linux # kernel version CURRENT := $(shell grep "UTS_RELEASE" $(KERNEL_DIR)/include/linux/version.h | cut -d'"' -f2) TREE := $(shell echo $(CURRENT) | cut -d. -f1,2) MODULE_DIR := $(shell test -d "$(INSTALL_MOD_PATH)/lib/modules/$(CURRENT)/kernel" && \ echo "$(INSTALL_MOD_PATH)/lib/modules/$(CURRENT)/kernel/drivers/media/video" ||\ echo "$(INSTALL_MOD_PATH)/lib/modules/$(CURRENT)/misc") ################################################# # some magic for using linux kernel settings # when compiling module(s) # for new-style kernel Makefiles (2.4) export-objs := list-multi := bttv2-objs := obj-m := mem1.o multi-m := $(filter $(list-multi), $(obj-m)) int-m := $(sort $(foreach m, $(multi-m), $($(basename $(m))-objs))) # for old-style kernel Makefiles (2.2) M_OBJS := $(sort $(filter-out $(export-objs), $(obj-m))) MX_OBJS := $(sort $(filter $(export-objs), $(obj-m))) MI_OBJS := $(sort $(filter-out $(export-objs), $(int-m))) MIX_OBJS := $(sort $(filter $(export-objs), $(int-m))) here: DIR=`pwd`; (cd $(KERNEL_DIR); make SUBDIRS=$$DIR modules) install: mv -v $(MODULE_DIR)/mem1.o $(MODULE_DIR)/mem1.o.old ; \ mkdir -p $(MODULE_DIR) ; \ cp -v $(M_OBJS) $(MODULE_DIR)/ ; \ /sbin/depmod -a uninstall: mv -v $(MODULE_DIR)/mem1.o.old $(MODULE_DIR)/mem1.o ; /sbin/depmod -a clean: -rm -f *.o .*.o.flags *~ include $(KERNEL_DIR)/Rules.make --------------A8D8F034E89FBC69C644EF82 Content-Type: text/plain; charset=us-ascii; name="desktop" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="desktop" # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_USE_STRING_486=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_TSC=y CONFIG_X86_PPRO_FENCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_ACPI is not set # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play configuration # CONFIG_PNP=y # CONFIG_ISAPNP is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set CONFIG_PARIDE=m CONFIG_PARIDE_PARPORT=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # # CONFIG_PARIDE_ATEN is not set # CONFIG_PARIDE_BPCK is not set # CONFIG_PARIDE_BPCK6 is not set # CONFIG_PARIDE_COMM is not set # CONFIG_PARIDE_DSTR is not set # CONFIG_PARIDE_FIT2 is not set # CONFIG_PARIDE_FIT3 is not set # CONFIG_PARIDE_EPAT is not set # CONFIG_PARIDE_EPIA is not set # CONFIG_PARIDE_FRIQ is not set # CONFIG_PARIDE_FRPW is not set # CONFIG_PARIDE_KBIC is not set # CONFIG_PARIDE_KTTI is not set # CONFIG_PARIDE_ON20 is not set # CONFIG_PARIDE_ON26 is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set CONFIG_BLK_DEV_DAC960=y CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=m # CONFIG_MD_MULTIPATH is not set CONFIG_BLK_DEV_LVM=m # # Networking options # CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_PDC202XX=y CONFIG_PDC202XX_BURST=y CONFIG_PDC202XX_FORCE=y # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y CONFIG_BLK_DEV_ATARAID=m CONFIG_BLK_DEV_ATARAID_PDC=m # CONFIG_BLK_DEV_ATARAID_HPT is not set # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set CONFIG_SCSI_BUSLOGIC=y # CONFIG_SCSI_OMIT_FLASHPOINT is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set CONFIG_SCSI_NCR53C8XX=m # CONFIG_SCSI_SYM53C8XX is not set CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=m # # Device Drivers # CONFIG_IEEE1394_PCILYNX=m # CONFIG_IEEE1394_PCILYNX_LOCALRAM is not set # CONFIG_IEEE1394_PCILYNX_PORTS is not set CONFIG_IEEE1394_OHCI1394=m # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_RAWIO=m # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_PCI=m CONFIG_I2O_BLOCK=m CONFIG_I2O_LAN=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNLANCE is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=y # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # CONFIG_STRIP is not set # CONFIG_WAVELAN is not set # CONFIG_ARLAN is not set # CONFIG_AIRONET4500 is not set # CONFIG_AIRONET4500_NONCS is not set # CONFIG_AIRONET4500_PROC is not set # CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_PLX_HERMES is not set CONFIG_NET_WIRELESS=y # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_IRDA_ULTRA=y # CONFIG_IRDA_OPTIONS is not set # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m CONFIG_IRPORT_SIR=m # # Dongle support # # CONFIG_DONGLE is not set # # FIR device drivers # CONFIG_USB_IRDA=m CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_TOSHIBA_FIR=m CONFIG_SMC_IRCC_FIR=m CONFIG_ALI_FIR=m CONFIG_VLSI_FIR=m # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=1024 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # # Input core support is needed for gameports # # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m CONFIG_AGP_INTEL=y CONFIG_AGP_I810=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y # CONFIG_AGP_SWORKS is not set CONFIG_DRM=y CONFIG_DRM_TDFX=m # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=m # CONFIG_DRM_I810 is not set CONFIG_DRM_MGA=m # CONFIG_DRM_SIS is not set # CONFIG_MWAVE is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # CONFIG_VIDEO_PROC_FS is not set # CONFIG_I2C_PARPORT is not set # # Video Adapters # # CONFIG_VIDEO_PMS is not set CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_PP=m CONFIG_VIDEO_CPIA_USB=m # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_ZORAN_BUZ is not set # CONFIG_VIDEO_ZORAN_DC10 is not set # CONFIG_VIDEO_ZORAN_LML33 is not set # CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_MEYE is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_MIROPCM20 is not set # CONFIG_RADIO_MIROPCM20_RDS is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # File systems # # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_TMPFS is not set # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set CONFIG_NTFS_FS=m CONFIG_NTFS_RW=y # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set CONFIG_ROMFS_FS=m CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # CONFIG_CODA_FS=m # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # CONFIG_ZLIB_FS_INFLATE is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m # CONFIG_NLS_ISO8859_13 is not set CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_RIVA is not set # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_VESA=y # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_SIS is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FBCON_ADVANCED is not set CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set CONFIG_SOUND_EMU10K1=m # CONFIG_MIDI_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set CONFIG_SOUND_ES1370=m CONFIG_SOUND_ES1371=m # CONFIG_SOUND_ESSSOLO1 is not set CONFIG_SOUND_MAESTRO=m # CONFIG_SOUND_MAESTRO3 is not set CONFIG_SOUND_ICH=m # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_MIDI_VIA82CXXX is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_TRACEINIT is not set # CONFIG_SOUND_DMAP is not set # CONFIG_SOUND_AD1816 is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_ADLIB is not set # CONFIG_SOUND_ACI_MIXER is not set CONFIG_SOUND_CS4232=m # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_GUS is not set # CONFIG_SOUND_VMIDI is not set # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MSS is not set # CONFIG_SOUND_MPU401 is not set # CONFIG_SOUND_NM256 is not set # CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_PAS is not set # CONFIG_PAS_JOYSTICK is not set # CONFIG_SOUND_PSS is not set CONFIG_SOUND_SB=m # CONFIG_SOUND_AWE32_SYNTH is not set # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_MAUI is not set CONFIG_SOUND_YM3812=m # CONFIG_SOUND_OPL3SA1 is not set # CONFIG_SOUND_OPL3SA2 is not set # CONFIG_SOUND_YMFPCI is not set # CONFIG_SOUND_YMFPCI_LEGACY is not set # CONFIG_SOUND_UART6850 is not set # CONFIG_SOUND_AEDSP16 is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_LONG_TIMEOUT is not set # # USB Controllers # CONFIG_USB_UHCI=m CONFIG_USB_UHCI_ALT=m CONFIG_USB_OHCI=m # # USB Device Class drivers # CONFIG_USB_AUDIO=m # CONFIG_USB_BLUETOOTH is not set CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # USB Human Interface Devices (HID) # # # Input core support is needed for USB HID # # # USB Imaging devices # CONFIG_USB_DC2XX=m # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # # USB Network adaptors # # CONFIG_USB_PEGASUS is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set CONFIG_USB_SERIAL_VISOR=m # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # # USB Miscellaneous drivers # # CONFIG_USB_RIO500 is not set # # Bluetooth support # CONFIG_BLUEZ=m # CONFIG_BLUEZ_L2CAP is not set # # Bluetooth device drivers # CONFIG_BLUEZ_HCIUSB=m CONFIG_BLUEZ_HCIUART=m CONFIG_BLUEZ_HCIVHCI=m # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_HIGHMEM=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_IOVIRT=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_BUGVERBOSE=y --------------A8D8F034E89FBC69C644EF82--