Hi all, having problem with this little sx6000. My mistake of not
research long enought for this card. Below is my I2O dmesg. Attachment
is the full version. It looks ok but when I make filesystem (
ext3,xfs,reiserfs all ) it give me i2o/iop0:Headware fail or
signal not being handle. Does any one get this card to work at all?
How can I fix it? ( any suggestion will be fine )
what is that Promise driver ( the one that provide from their web )
for?
Thanks alot.

Alex




I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 13
Linux I2O PCI support (c) 1999 Red Hat Software.
i2o: Checking for PCI I2O controllers...
i2o: I2O controller on bus 2 at 33.
i2o: PCI I2O controller at 0xFC000000 size=4194304
I2O: Promise workarounds activated.
I2O: MTRR workaround for Intel i960 processor
i2o/iop0: Installed at IRQ16
i2o: 1 I2O controller found and installed.
Activating I2O controllers...
This may take a few minutes if there are many devices
i2o/iop0: Reset rejected, trying to clear
i2o/iop0: LCT has 8 entries.
i2o/iop0: Configuration dialog desired.
I2O configuration manager v 0.04.
  (C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
   (c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
i2ob: Installing tid 11 device at unit 0
i2o/hda: Max segments 28, queue depth 8, byte limit 49152.
i2o/hda: Type 85: 351905MB, 512 byte sectors.
i2o/hda: Maximum sectors/read set to 96.
 i2o/hda: i2o/hda1 < i2o/hda5 i2o/hda6 i2o/hda7 i2o/hda8 i2o/hda9
i2o/hda10 i2o/hda11 i2o/hda12 i2o/hda13 i2o/hda14 i
2o/hda15 >
I2O LAN OSM (C) 1999 University of Helsinki.
i2o_scsi.c: Version 0.0.1
  chain_pool: 2048 bytes @ c1692800
  (512 byte buffers X 4 can_queue X 1 i2o controllers)