From: Gustavo Zacarias <gustavo@zacarias.com.ar>
To: linux-kernel@vger.kernel.org
Subject: Accton network chipset -> bad tulip clone?
Date: Tue, 01 Apr 2003 17:04:26 -0300 [thread overview]
Message-ID: <3E89F0CA.3060007@zacarias.com.ar> (raw)
Hi.
Has anyone seen this happen?
I'm getting TX packets as errors, looks like some swapped register in
the chip maybe?
And yes, they are actually TXed correct, and i've also tried swapping
the NIC with another one from the same brand/model, and also into
another machine with the same results.
The chip is physically branded as an "ADMtek AN983B", the board is an
"Xnet 3000ACM".
PCI manufacturer ID looks quite phony, this is no Linksys board.
Kernel is 2.4.20.
Any ideas?
----
# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:05:1C:0D:D9:E5
inet addr:192.168.1.254 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2989342 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:3448876 dropped:0 overruns:0 carrier:6778358
collisions:0 txqueuelen:100
RX bytes:839123376 (800.2 Mb) TX bytes:0 (0.0 b)
Interrupt:9 Base address:0x1800
# lspci -v -s 00:0f.0
00:0f.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
Subsystem: Accton Technology Corporation: Unknown device 1216
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at f000 [size=256]
Memory at ffaef800 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at ffac0000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
----
reply other threads:[~2003-04-01 19:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E89F0CA.3060007@zacarias.com.ar \
--to=gustavo@zacarias.com.ar \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®