From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264310AbTDKH2i (for ); Fri, 11 Apr 2003 03:28:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264305AbTDKH2e (for ); Fri, 11 Apr 2003 03:28:34 -0400 Received: from softers.net ([213.139.168.106]:43998 "EHLO mail.softers.net") by vger.kernel.org with ESMTP id S264308AbTDKH1a (for ); Fri, 11 Apr 2003 03:27:30 -0400 Message-ID: <3E967135.E87F75E6@softers.net> Date: Fri, 11 Apr 2003 10:39:33 +0300 From: Jarmo =?iso-8859-2?Q?J=E4rvenp=E4=E4?= Organization: Softers Oy X-Mailer: Mozilla 4.8 [en] (Windows NT 5.0; U) X-Accept-Language: en MIME-Version: 1.0 To: Michael Frank CC: linux-kernel@vger.kernel.org Subject: Re: 2.4.21-pre7, 2.5.66, IDE Errors during boot - just a nuisance ? References: <200304101552.25091.mflt1@micrologica.com.hk> Content-Type: text/plain; charset=iso-8859-2 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Indeed we have the same problem. This gives a bit of headache, hda1 and hdc1 are software raid 1 array and sometimes one disk is dropped from the array due "error" on the disk. Hotadd will succeed and no bad blocks on either disk. No problems with 2.4.18. Not tested with .19 nor .20. BR, Jarmo Kernel 2.4.2.21-pre6 lspci: 00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 03) 00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01) 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01) 00:0e.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] 00:10.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) dmesg: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALL_TM3200A, ATA DISK drive hdb: E295X, ATAPI CD/DVD-ROM drive blk: queue c02e1ee0, I/O limit 4095Mb (mask 0xffffffff) hdc: QUANTUM FIREBALL_TM3200A, ATA DISK drive blk: queue c02e2330, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: 6281856 sectors (3216 MB) w/76KiB Cache, CHS=779/128/63, DMA hdc: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdc: task_no_data_intr: error=0x04 { DriveStatusError } hdc: 6281856 sectors (3216 MB) w/76KiB Cache, CHS=6232/16/63, DMA hdb: ATAPI 16X CD-ROM drive, 240kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: cat /proc/ide/piix Controller: 0 Intel PIIX4 Ultra 33 Chipset. --------------- Primary Channel ---------------- Secondary Channel ------------- enabled enabled --------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------ DMA enabled: yes yes yes no UDMA enabled: no no no no UDMA enabled: X X X X UDMA DMA PIO hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: QUANTUM FIREBALL_TM3200A Serial Number: 295702034106 Firmware Revision: A6B.2400 Standards: Likely used: 2 Configuration: Logical max current cylinders 6232 6232 heads 16 16 sectors/track 63 63 -- bytes/track: 32256 bytes/sector: 512 CHS current addressable sectors: 6281856 LBA user addressable sectors: 6281856 device size with M = 1024*1024: 3067 MBytes device size with M = 1000*1000: 3216 MBytes (3 GB) Capabilities: LBA, IORDY(can be disabled) Buffer size: 76.5kB bytes avail on r/w long: 4 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 16 Current = 16 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=300ns IORDY flow control=120ns hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: QUANTUM FIREBALL_TM3200A Serial Number: 295634511413 Firmware Revision: A6B.2400 Standards: Likely used: 2 Configuration: Logical max current cylinders 6232 6232 heads 16 16 sectors/track 63 63 -- bytes/track: 32256 bytes/sector: 512 CHS current addressable sectors: 6281856 LBA user addressable sectors: 6281856 device size with M = 1024*1024: 3067 MBytes device size with M = 1000*1000: 3216 MBytes (3 GB) Capabilities: LBA, IORDY(can be disabled) Buffer size: 76.5kB bytes avail on r/w long: 4 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 16 Current = 16 DMA: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=300ns IORDY flow control=120ns Michael Frank wrote: > > Noticed this for some time in 2.5.64 and up, and now also in 2.4.21-pre6 and pre7. It was OK 2.4.20. No functional problems were encountered with 2.4.21, 2.5.6x so far. > > Its a P1, lspci follows > > 00:00.0 Host bridge: Intel Corp. 430HX - 82439HX TXC [Triton II] (rev 03) > 00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01) > 00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] > 00:09.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) > 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) > 00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 01) > > Apr 10 15:17:30 mhfl1 kernel: Linux version 2.4.21-pre7-mhf18-np (mhf@mhfl3) (gcc version 2.95.3 20010315 (release)) #2 > > Apr 10 15:12:42 mhfl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 > Apr 10 15:12:42 mhfl1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Apr 10 15:12:42 mhfl1 kernel: PIIX3: IDE controller at PCI slot 00:07.1 > Apr 10 15:12:42 mhfl1 kernel: PIIX3: chipset revision 0 > Apr 10 15:12:42 mhfl1 kernel: PIIX3: not 100%% native mode: will probe irqs later > Apr 10 15:12:42 mhfl1 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio > Apr 10 15:12:42 mhfl1 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio > Apr 10 15:12:42 mhfl1 kernel: hda: QUANTUM BIGFOOT2550A, ATA DISK drive > Apr 10 15:12:42 mhfl1 kernel: blk: queue c0347ae0, I/O limit 4095Mb (mask 0xffffffff) > Apr 10 15:12:42 mhfl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Apr 10 15:12:43 mhfl1 kernel: hda: attached ide-disk driver. > > ------------------------------\/ > Apr 10 15:12:43 mhfl1 kernel: hda: task_no_data_intr: status=0x53 { DriveReady SeekComplete Index Error } > Apr 10 15:12:43 mhfl1 kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError } > > Apr 10 15:12:43 mhfl1 kernel: hda: 5033952 sectors (2577 MB) w/87KiB Cache, CHS=624/128/63, DMA > Apr 10 15:12:43 mhfl1 kernel: Partition check: > Apr 10 15:12:43 mhfl1 kernel: hda: hda1 hda2 hda3 > > ---------- > Mar 30 15:46:51 mhfl1 kernel: Linux version 2.5.66-mhf2 (mhf@mhfl2) (gcc version 2.95.3 20010315 (release)) #12 Sat Mar 29 > > Mar 30 15:47:05 mhfl1 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > Mar 30 15:47:05 mhfl1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Mar 30 15:47:05 mhfl1 kernel: PIIX3: IDE controller at PCI slot 00:07.1 > Mar 30 15:47:05 mhfl1 kernel: PIIX3: chipset revision 0 > Mar 30 15:47:05 mhfl1 kernel: PIIX3: not 100%% native mode: will probe irqs later > Mar 30 15:47:05 mhfl1 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio > Mar 30 15:47:05 mhfl1 kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio > Mar 30 15:47:05 mhfl1 kernel: hda: QUANTUM BIGFOOT2550A, ATA DISK drive > Mar 30 15:47:05 mhfl1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ------------------------------\/ > Mar 30 15:47:05 mhfl1 kernel: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } > Mar 30 15:47:05 mhfl1 kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError } > > Mar 30 15:47:05 mhfl1 kernel: hda: 5033952 sectors (2577 MB) w/87KiB Cache, CHS=4994/16/63, DMA > Mar 30 15:47:05 mhfl1 kernel: hda: hda1 hda2 hda3 > > Regards > Michael > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/