Re: [PATCH 1/2] w1: ds2408: add a missing reset when retrying in output_write()

[Jean-Francois Dagenais <jeff.dagenais@gmail.com>]

> On Mar 19, 2019, at 10:21, Jean-Francois Dagenais <jeff.dagenais@gmail.com> wrote:
> 
> I can do a proper patch submission if you guys provide positive response on this
> early RFC. Or better yet, you can take it and own it yourself as your v2
> Mariusz. ;)

Just FYI, here's what the retry loop looks like after this suggested patch:

	do {
		w1_buf[0] = W1_F29_FUNC_CHANN_ACCESS_WRITE;
		w1_buf[1] = *buf;
		w1_buf[2] = ~(*buf);
		w1_write_block(sl->master, w1_buf, 3);

		readBack = w1_read_8(sl->master);

		if (readBack == W1_F29_SUCCESS_CONFIRM_BYTE &&
		    optional_read_back_valid(sl, *buf)) {
			bytes_written = 1;
			goto out;
		}

		if (w1_reset_resume_command(sl->master))
			goto out; /* unrecoverable error */
		/* try again, the slave is ready for a command */
	} while (--retries);


Much better on the eyes.