Greg KH wrote:
> On Wed, Apr 23, 2003 at 02:49:27PM -0500, David van Hoose wrote:
> 
>>Nils Holland wrote:
>>
>>>On Wednesday 23 April 2003 18:54, David van Hoose wrote:
>>>
>>>
>>>
>>>>I am running RedHat 9. Trackball is detected and works when using the
>>>>stock 2.4.20-9 kernel that RedHat provided.
>>>>
>>>>With 2.4.21-rc1, I have included the USB and input devices in the
>>>>kernel, as modules, and as various combinations in between. My USB
>>>>Logitech Trackball shows up as being detected and setup, but it doesn't
>>>>work.
>>>
>>>
>>>I'm using a Logitech Cordless TrackMan here, and this works fine with 
>>>2.4.21-rc1. I don't know which trackball you have, but the Logitech input 
>>>devices all seem to be using more or less the same receiver, and this is 
>>>what the problem would be about.
>>>
>>>Anyway, if not done already, I would suggest that you plug the trackball 
>>>right into one of the computer's USB ports and not into an external hub to 
>>>see if that makes a difference.
>>
>>I have a Logitech Cordless Optical Trackman. It detects as a Logitech 
>>Cordless Receiver. My motherboard is an Asus P4S8X. It has the 
>>SiS648/SiS963 chipsets. I'm not using an external hub. I'm using the 
>>ports on my motherboard. I've tried using all 6 USB ports I have, but I 
>>get the same thing; detection and no input.
> 
> 
> If you do not build in the CONFIG_USB_EHCI driver, does it work ok?

Nope. Same deal. Tried all 6 ports too. Attached is the dmesg and config.

Regards,
David