Linux version 2.4.20 (root@stockholm) (gcc version 2.95.4 20011002 (Debian prerelease)) #7 Tue May 27 01:31:05 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001e000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
480MB LOWMEM available.
On node 0 totalpages: 122880
zone(0): 4096 pages.
zone(1): 118784 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=LinuxOLD ro root=302
No local APIC present or hardware disabled
Initializing CPU#0
Detected 1712.579 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 483780k/491520k available (1202k kernel code, 7352k reserved, 524k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febf9ff 00000000 00000000 00000000
CPU:             Common caps: 3febf9ff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: BIOS32 Service Directory structure at 0xc00fdb00
PCI: BIOS32 Service Directory entry at 0xfdb10
PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=01
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: IDE base address trash cleared for 00:02.5
PCI: IDE base address fixup for 00:02.5
PCI: Scanning for ghost devices on bus 0
PCI: Scanning for ghost devices on bus 1
PCI: IRQ init
PCI: Interrupt Routing Table found at 0xc00f7ba0
00:01 slot=00 0:41/d898 1:42/d898 2:43/d898 3:44/d898
00:02 slot=00 0:63/d898 1:42/d898 2:61/d898 3:60/d898
00:03 slot=00 0:62/d898 1:00/0000 2:00/0000 3:00/0000
00:06 slot=01 0:42/d898 1:43/d898 2:44/d898 3:41/d898
00:07 slot=02 0:43/d898 1:44/d898 2:41/d898 3:42/d898
00:0c slot=00 0:44/d898 1:00/0000 2:00/0000 3:00/0000
00:0e slot=00 0:42/d898 1:43/d898 2:44/d898 3:41/d898
00:0f slot=00 0:42/d898 1:43/d898 2:44/d898 3:41/d898
PCI: Attempting to find IRQ router for 1039:0008
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
PCI: IRQ fixup
00:07.0: ignoring bogus IRQ 255
IRQ for 00:07.0:0 -> PIRQ 43, mask d898, excl 0000 -> newirq=0 ... failed
PCI: Allocating resources
PCI: Resource e0000000-e3ffffff (f=200, d=0, p=0)
PCI: Resource dfffa000-dfffafff (f=200, d=0, p=0)
PCI: Resource dfffb000-dfffbfff (f=200, d=0, p=0)
PCI: Resource 0000ff00-0000ff0f (f=101, d=0, p=0)
PCI: Resource 0000dc00-0000dcff (f=101, d=0, p=0)
PCI: Resource 0000d800-0000d87f (f=101, d=0, p=0)
PCI: Resource 0000d400-0000d4ff (f=101, d=0, p=0)
PCI: Resource dfff9f00-dfff9fff (f=200, d=0, p=0)
PCI: Resource dfff8000-dfff8fff (f=200, d=0, p=0)
PCI: Resource 0000d000-0000d0ff (f=101, d=0, p=0)
PCI: Resource dfff9e00-dfff9eff (f=200, d=0, p=0)
PCI: Resource d0000000-d7ffffff (f=1208, d=0, p=0)
PCI: Resource dfee0000-dfefffff (f=200, d=0, p=0)
PCI: Resource 0000ac00-0000ac7f (f=101, d=0, p=0)
PCI: Sorting device list...
...
usb.c: registered new driver hub
IRQ for 00:02.3:0 -> PIRQ 63, mask d898, excl 0000 -> newirq=11<6>SiS router pirq escape (99)
 -> assigning IRQ 11<6>SiS router pirq escape (99)
 ... failed
usb-ohci.c: USB OHCI at membase 0xde816000, IRQ 11
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
IRQ for 00:02.2:3 -> PIRQ 60, mask d898, excl 0000 -> newirq=11<6>SiS router pirq escape (96)
 -> assigning IRQ 11<6>SiS router pirq escape (96)
 ... failed
usb-ohci.c: USB OHCI at membase 0xde818000, IRQ 11
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
...
8139too Fast Ethernet driver 0.9.26
IRQ for 00:06.0:0 -> PIRQ 42, mask d898, excl 0000 -> newirq=11 -> got IRQ 11
PCI: Found IRQ 11 for device 00:06.0
PCI: Sharing IRQ 11 with 00:0f.0
eth0: RealTek RTL8139 Fast Ethernet at 0xde88bf00, 00:02:44:63:79:96, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
IRQ for 00:0f.0:0 -> PIRQ 42, mask d898, excl 0000 -> newirq=11 -> got IRQ 11
PCI: Found IRQ 11 for device 00:0f.0
PCI: Sharing IRQ 11 with 00:06.0
eth1: RealTek RTL8139 Fast Ethernet at 0xde88de00, 00:10:dc:6b:b0:92, IRQ 11
eth1:  Identified 8139 chip type 'RTL-8139C'
...
IRQ for 00:02.7:2 -> PIRQ 61, mask d898, excl 0000 -> newirq=11<6>SiS pirq: advanced IDE/ACPI/DAQ mapping not yet implemented
 -> assigning IRQ 11<6>advanced SiS pirq mapping not yet implemented
 ... failed
...
Linux PCMCIA Card Services 3.2.4
  kernel build: 2.4.20 #6 Mon May 19 01:56:26 CEST 2003
  options:  [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Enabling device 00:07.0 (0000 -> 0002)
IRQ for 00:07.0:0 -> PIRQ 43, mask d898, excl 0000 -> newirq=11 -> assigning IRQ 11 ... OK
PCI: Assigned IRQ 11 for device 00:07.0