DEC KZPSA SCSI card - is there a linux driver?

[narancs <narancs@narancs.tii.matav.hu>]

Hi people,

I guess this mail should have gone to a mailing list like linux-scsi, 
but I just couldn't find that list's address - sorry if this mail is not 
to be here :)

so I have just got a DEC PCI SCSI card which has a sym53c720 chip and an 
intel 930 chip and an LSI chip on board. it is a full-length 32bit PCI 
scsi card. (it was working fine in an alpha axp system with true64 unix, 
and now it is installed in a PC.)

with linux kernel 2.4.20 (suse8.2) trying all the modules, I just 
couldn't get it working.
I moved the card to other PCI slots and play with irqs, but no success.

please help that which driver should get it working if this card is 
supported at all.

thanks!

00:0d.0 SCSI storage controller: Digital Equipment Corporation KZPSA [KZPSA]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
ParErr+ Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF+ FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (2000ns min, 31750ns max), cache line size 08
        Interrupt: pin A routed to IRQ 7
        BIST result: 00
        Region 0: Memory at fedfd000 (64-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at d000 [size=4K]
        Region 3: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
        Expansion ROM at <unassigned> [disabled] [size=64K]