Hi,
which the latest 2.6 kernel, I have the following problems:

1. My network card is not detected. It is a 3Com 3C509B EtherLink III, 
which is correctly dtetcted by isapnp, but the card driver doesn't 
recognize it. I don't have any network device. This seems to have 
something to do with the ressources on my MB which is a Gigabyte 5-AA 
which is an AT sized ATX MB. USB is disabled in the BIOS, but if I 
enable USB in the kernel, a ressource conflict between the network card 
and USB is reported. I am attaching my .config + the bootlog output.

2. My /proc/devices looks strange. All sd devices are listed, despite I 
have only one SCSI disk. I'll attach the output.

3. catting /proc/bus/pnp/esdi (not esdi_info) results in an endless 
OOPS. As the OOPSing doesn't stop, and I can't scroll lock, I can't give 
very much info on where the OOPS occurs.

4. My wheel mouse is correctly detected (see the bootlog), however wheel 
scrolling doesn't work.

My system is rock solid under 2.4 with the identical config.

Regards

Dominik