Linux version 2.6.0-test3 (root@domml) (gcc version 3.2) #3 Tue Aug 12 12:49:55 CEST 2003 Video mode to be used for restore is 0 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bff0000 (usable) BIOS-e820: 000000000bff0000 - 000000000bff8000 (ACPI data) BIOS-e820: 000000000bff8000 - 000000000c000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 191MB LOWMEM available. On node 0 totalpages: 49136 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 45040 pages, LIFO batch:10 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=Linux26 ro root=306 pci=biosirq video=aty128fb:1280x1024@75 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 500.978 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 991.23 BogoMIPS Memory: 190236k/196544k available (2556k kernel code, 5680k reserved, 835k data, 152k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfdb41, last bus=1 mtrr: v2.0 (20020519) BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: the driver 'system' has been registered PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f73f0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6cc6, dseg 0xf0000 pnp: match found with the PnP device '00:00' and the driver 'system' PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0 aty128fb: Rage128 BIOS located at cfec0000 aty128fb: Rage128 Pro PF (AGP) [chip rev 0x1] 32M 128-bit SDR SGRAM (1:1) fb0: ATY Rage128 frame buffer device on Rage128 Pro PF (AGP) aty128fb: Rage128 MTRR set to ON Console: switching to colour frame buffer device 160x64 pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Journalled Block Device driver loaded udf: registering filesystem isapnp: Scanning for PnP cards... isapnp: Card '3Com 3C509B EtherLink III' isapnp: 1 Plug & Play card detected total request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Real Time Clock Driver v1.11 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected ALi M1541 chipset agpgart: Maximum main memory to use for agp memory: 149M agpgart: AGP aperture is 64M @ 0xe0000000 mtrr: no more MTRRs available [drm] Initialized r128 2.5.0 20030725 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:09' and the driver 'serial' pnp: match found with the PnP device '00:0a' and the driver 'serial' pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:0b' and the driver 'parport_pc' parport0: PC-style at 0x378 [PCSPP,EPP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). Using anticipatory scheduling elevator Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ALI15X3: chipset revision 193 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: IBM-DJNA-351520, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33) hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdd, sector 0 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA PCI: Found IRQ 11 for device 0000:00:08.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35 aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs (scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 15) Vendor: SEAGATE Model: ST373405LW Rev: 0003 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 32 SCSI device sda: 143374741 512-byte hdwr sectors (73408 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Console: switching to colour frame buffer device 160x64 mice: PS/2 mouse device common for all mice gameport: at pci0000:00:0a.1 speed 1242 kHz input: PS2++ Logitech Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c /dev entries driver module version 2.7.0 (20021208) i2c-philips-par.o: i2c Philips parallel port adapter module version 2.7.0 (20021208) i2c-philips-par.o: attaching to parport0 parport0: cannot grant exclusive access for device i2c-philips-par i2c-philips-par: Unable to register with parport. i2c-elv.o: i2c ELV parallel port adapter module version 2.7.0 (20021208) i2c-velleman.o: i2c Velleman K8000 adapter module version 2.7.0 (20021208) i2c-ali15x3.o version 2.7.0 (20021208) Advanced Linux Sound Architecture Driver Version 0.9.6 (Mon Jul 28 11:08:42 2003 UTC). PCI: Found IRQ 9 for device 0000:00:0a.0 ALSA device list: #0: Sound Blaster Live! (rev.5) at 0xdf80, irq 9 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 256 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 4681) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k freed Adding 136512k swap on /dev/hda7. Priority:-1 extents:1 spurious 8259A interrupt: IRQ7. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. end_request: I/O error, dev hdd, sector 0 (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error cdrom: open failed. cdrom: open failed. cdrom: open failed. cdrom: open failed. end_request: I/O error, dev hdd, sector 0 (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error (scsi0:A:0:0): CDB: 0x12 0x1 0x80 0x0 0xff 0x0 (scsi0:A:0:0): Saw underflow (744 of 768 bytes). Treated as error