[PATCH] serial/core.c: Unneeded memory barriers and cleanup

[Felipe W Damasio <felipewd@terra.com.br>]

[-- Attachment #1: Type: text/plain, Size: 536 bytes --]

	Hi Russell,

	Patch against 2.6-test5.

	Kills a unneeded set_current_state (TASK_RUNNING) after 
schedule_timeout and replaces a TASK_RUNNING settings with 
non-memory-barrier versions.

	On uart_suspend_port, that set state thing isn't needed if 
schedule_timeout was executed..but I couldn't come up with a (clean) 
fix for that, since we need to execute ops->shutdown. So I just 
replace it with __set_current_state so It's just an attribution and 
it's not that expensive.

	Feel free to tell me I screwed up :)

	Thanks,

Felipe

[-- Attachment #2: core-state.patch --]
[-- Type: text/plain, Size: 1334 bytes --]

--- drivers/serial/core.c.orig	2003-09-15 11:49:50.000000000 -0300
+++ drivers/serial/core.c	2003-09-15 11:53:13.000000000 -0300
@@ -1022,7 +1022,7 @@
 		cprev = cnow;
 	}
 
-	current->state = TASK_RUNNING;
+	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&state->info->delta_msr_wait, &wait);
 
 	return ret;
@@ -1277,7 +1277,6 @@
 		if (state->close_delay) {
 			set_current_state(TASK_INTERRUPTIBLE);
 			schedule_timeout(state->close_delay);
-			set_current_state(TASK_RUNNING);
 		}
 	} else if (!uart_console(port)) {
 		uart_change_pm(state, 3);
@@ -1345,11 +1344,11 @@
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(char_time);
 		if (signal_pending(current))
-			break;
+			return;
 		if (time_after(jiffies, expire))
-			break;
+			return;
 	}
-	set_current_state(TASK_RUNNING); /* might not be needed */
+	__set_current_state(TASK_RUNNING); /* might not be needed */
 }
 
 /*
@@ -1480,7 +1479,7 @@
 		if (signal_pending(current))
 			break;
 	}
-	set_current_state(TASK_RUNNING);
+	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&info->open_wait, &wait);
 
 	state->count++;
@@ -1899,7 +1898,7 @@
 				set_current_state(TASK_UNINTERRUPTIBLE);
 				schedule_timeout(10*HZ/1000);
 			}
-			set_current_state(TASK_RUNNING);
+			__set_current_state(TASK_RUNNING);
 
 			ops->shutdown(port);
 		}