mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Colin Ngam <cngam@sgi.com>
To: Martin Diehl <lists@mdiehl.de>
Cc: linux-kernel@vger.kernel.org, habeck@sgi.com
Subject: Re: [patch] pci_dma_sync_to_device
Date: Tue, 21 Oct 2003 08:33:43 -0500	[thread overview]
Message-ID: <3F9535B6.B574818D@sgi.com> (raw)
In-Reply-To: <Pine.LNX.4.44.0310211151000.4246-100000@notebook.home.mdiehl.de>

Martin Diehl wrote:

Hi Martin,

Are these dma sync routines for NON Cache Coherent systems or
are they performance features that allows the flushing of dirty
cache data out to Memory before a transfer?

Thanks.

colin

> Hi,
>
> following your suggestion this patch adds the missing
> pci_dma_sync_to_device_{single,sg} call to sync streaming write buffers
> after cpu modification. Like other pci dma calls it's a pci specific
> wrapper plus corresponding generic function in asm-i386/dma-mapping.h.
> Other platforms still need their individual implementations.
>
> Patch below is against 2.6.0-test8. Testing was done using a modified
> version of the vlsi_ir driver which calls pci_dma_to_device_single instead
> of a private implementation.
>
> I'm wondering whether it would be a good idea to add some BUG_ON there to
> catch bad combinations with transfer direction. OTOH, on i386 the worst
> to happen might be some unneeded flushes...
>
> Martin
>
> -----------------
>
> --- linux-2.6.0-test8/include/asm-i386/dma-mapping.h    Wed Oct  8 21:24:53 2003
> +++ v2.6.0-test8-md/include/asm-i386/dma-mapping.h      Tue Oct 21 10:56:45 2003
> @@ -92,6 +92,20 @@
>         flush_write_buffers();
>  }
>
> +static inline void
> +dma_sync_to_device_single(struct device *dev, dma_addr_t dma_handle, size_t size,
> +               enum dma_data_direction direction)
> +{
> +       flush_write_buffers();
> +}
> +
> +static inline void
> +dma_sync_to_device_sg(struct device *dev, struct scatterlist *sg, int nelems,
> +                enum dma_data_direction direction)
> +{
> +       flush_write_buffers();
> +}
> +
>  static inline int
>  dma_supported(struct device *dev, u64 mask)
>  {
> --- linux-2.6.0-test8/include/asm-generic/pci-dma-compat.h      Wed Oct  8 21:24:02 2003
> +++ v2.6.0-test8-md/include/asm-generic/pci-dma-compat.h        Tue Oct 21 10:55:09 2003
> @@ -84,4 +84,18 @@
>         dma_sync_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
>  }
>
> +static inline void
> +pci_dma_sync_to_device_single(struct pci_dev *hwdev, dma_addr_t dma_handle,
> +                   size_t size, int direction)
> +{
> +       dma_sync_to_device_single(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
> +}
> +
> +static inline void
> +pci_dma_sync_to_device_sg(struct pci_dev *hwdev, struct scatterlist *sg,
> +               int nelems, int direction)
> +{
> +       dma_sync_to_device_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
> +}
> +
>  #endif
> --- linux-2.6.0-test8/Documentation/DMA-mapping.txt     Wed Oct  8 21:24:06 2003
> +++ v2.6.0-test8-md/Documentation/DMA-mapping.txt       Tue Oct 21 11:27:17 2003
> @@ -543,8 +543,11 @@
>  all bus addresses.
>
>  If you need to use the same streaming DMA region multiple times and touch
> -the data in between the DMA transfers, just map it with
> -pci_map_{single,sg}, and after each DMA transfer call either:
> +the data in between the DMA transfers, the buffer needs to be synced
> +depending on the transfer direction.
> +
> +When reading from the device, just map it with pci_map_{single,sg},
> +and after each DMA transfer call either:
>
>         pci_dma_sync_single(dev, dma_handle, size, direction);
>
> @@ -553,6 +556,20 @@
>         pci_dma_sync_sg(dev, sglist, nents, direction);
>
>  as appropriate.
> +
> +When writing to the mapped the buffer, prepare the data and
> +then before giving the buffer to the hardware call either:
> +
> +       pci_dma_sync_to_device_single(dev, dma_handle, size, direction);
> +
> +or:
> +
> +       pci_dma_sync_to_device_sg(dev, sglist, nents, direction);
> +
> +as appropriate.
> +
> +For bidirectional mappings the corresponding calls are required before and
> +after passing ownership between cpu and hardware.
>
>  After the last DMA transfer call one of the DMA unmap routines
>  pci_unmap_{single,sg}. If you don't touch the data from the first pci_map_*
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/


  reply	other threads:[~2003-10-21 14:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-10-21 10:37 Martin Diehl
2003-10-21 13:33 ` Colin Ngam [this message]
2003-10-22  6:04   ` Martin Diehl
2003-10-22 10:59 ` David S. Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3F9535B6.B574818D@sgi.com \
    --to=cngam@sgi.com \
    --cc=habeck@sgi.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lists@mdiehl.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome